Start with a symmetrical position for two speakers and connections that suit your equipment. Then choose between a compact stereo set and two separate nearfield monitors. A compact set can be convenient if desk space and shared controls are your priorities, while individual models offer different connections and placement options. Assess the stereo balance and any audible hiss yourself at your usual low listening volume; Genelec recommends a symmetrical listening setup.
Who are these monitors for?
Folk mixer in a challenging home studio
Wants to assess vocals and acoustic instruments from a fixed listening position, but needs to account for reflections from the desk and walls. Genelec recommends a symmetrical setup around the listening position.
Home mixer who listens at low volume
Works at a modest volume and wants to judge for themselves how the bass, stereo balance and any audible speaker hiss sound at that level.
Mixer with limited desk space
Needs room for two speakers and wants to check in advance that the connections, controls and box contents will work with their existing equipment.
What to consider when choosing
Compact active stereo set
A good fit if: you need two speakers to fit on a small desk and want a set with shared volume control and suitable analogue inputs. PreSonus sells the Eris 3.5 2nd Gen as a pair.
Keep in mind: PreSonus specifies a lower frequency response limit of 80 Hz. On its own, that figure doesn’t tell you how the lowest notes in your recordings will sound from your listening position.
Two individual nearfield monitors
A good fit if: you can position two speakers symmetrically and connect the outputs from your audio equipment to your chosen model. The Yamaha HS5, JBL 305P MkII and ADAM Audio T5V each have their own connections and placement considerations.
Keep in mind: check whether your chosen version is sold as a single monitor or a pair, which cables you’ll need and how much space there is behind the cabinets. Room controls won’t automatically make an unsuitable setup work.
Very compact monitors with calibration
A good fit if: desk space is limited and you want to use the measurement and adjustment features. The IK Multimedia iLoud Micro Monitor Pro has ARC X built in.
Keep in mind: check that you’re buying the pair version if you need the accompanying measurement microphone. Calibration doesn’t replace suitable stereo placement or prove that the monitors are hiss-free at low volume.
| Consideration |
What to check before buying |
Who is this important for? |
| Placement and room |
Measure the space for two cabinets around a fixed listening position. Consider the position of a bass-reflex port and any room controls; Genelec recommends symmetrical stereo placement. |
If your desk or walls limit where the speakers can go, first check whether two speakers will fit around your listening position. Around 33% of consumers in this mixing scenario give placement and room effects top priority. |
| Vocals, instruments and stereo |
Listen from your usual position with familiar reference material and check that both speakers can be positioned evenly. |
If you want to assess vocals, acoustic instruments and the left-to-right balance, a fixed listening position is useful. For around 27% of consumers, that balance comes first. |
| Low-volume listening and bass |
Listen to the exact model at your usual volume, including with no signal. Compare frequency ranges only alongside their measurement conditions: Yamaha gives 54 Hz at −10 dB for the HS5, while ADAM Audio gives 45 Hz at −6 dB for the T5V. These figures aren’t directly comparable. |
In a quiet room, you’ll want to check for yourself whether any hiss is audible and whether you can assess the bass balance at a modest volume. Around 20% of consumers prioritise low-volume listening and bass control. |
| Connections and complete set |
Check that the inputs match your equipment’s outputs, which cables you’ll need, and whether the box contains one monitor or a pair. Yamaha lists the HS5 as one monitor per box; PreSonus sells the Eris 3.5 2nd Gen as a pair. |
If you want to connect a complete stereo setup, it’s important to get both the connections and the number of speakers right. Around 20% of consumers make connectivity and a complete set their top priority. |
Common buying mistakes
-
Mistaking a single monitor for a stereo set
Yamaha lists the HS5 as one monitor per box, while PreSonus sells the Eris 3.5 2nd Gen as a pair. The number of cabinets determines whether the version you choose gives you a stereo pair.
If a version is sold individually, you may need a second monitor for stereo, as well as suitable cables.
Check the number of speakers, the connections included and what you’ll need for both left and right channels.
-
Comparing frequency limits without checking the measurement conditions
Yamaha gives 54 Hz at −10 dB for the HS5; ADAM Audio gives 45 Hz at −6 dB for the T5V. These figures aren’t directly comparable as a test of bass response.
Check the dB condition alongside the stated frequency response, and assess the balance from your own listening position.
-
Assuming room controls will fix every setup
The position of your listening spot and speakers still matters, even when a model offers room controls. Genelec recommends symmetrical placement; JBL describes Boundary EQ as a way to adjust bass boosted by nearby surfaces.
First plan where your listening position and both speakers can go. Then compare the adjustment options that suit that placement.
Brands to compare
PreSonus
The Eris 3.5 2nd Gen is designed for anyone looking for a compact desktop set sold as a pair.
- PreSonus lists TRS, RCA and 3.5 mm inputs, along with a front-mounted volume control.
- The stated frequency response starts at 80 Hz. That specification alone doesn’t tell you how the lowest notes will sound in your room.
Yamaha
The HS5 is an individual active nearfield monitor for a two-cabinet setup with suitable analogue outputs.
- Yamaha lists XLR/TRS inputs and ROOM CONTROL and HIGH TRIM controls.
- The HS5 is sold individually. Yamaha gives 54 Hz as its −10 dB point; don’t compare this directly with a specification measured at a different dB limit.
ADAM Audio
The T5V is an individual nearfield monitor with a 5-inch woofer.
- According to ADAM Audio, the T5V has a rear bass-reflex port and a stated response from 45 Hz at −6 dB.
- If you’re placing it close to a wall, consider the position of the rear port. The specification won’t predict how the bass will sound from your listening position.
JBL
The 305P MkII is an individual 5-inch monitor with setup adjustment options.
- JBL lists XLR/TRS inputs, Boundary EQ and HF Trim.
- JBL says Boundary EQ can reduce extra bass caused by nearby surfaces. That doesn’t establish what the result will be in your specific home studio.
IK Multimedia
The iLoud Micro Monitor Pro is designed for a very tight desktop setup where you want to use ARC X.
- According to IK Multimedia, the model has a 3-inch woofer, XLR and RCA inputs, and built-in ARC X.
- The manufacturer says the measurement microphone is included with the pair version. Check which version you’re choosing; calibration doesn’t prove how the model will perform in your room.
KRK
The ROKIT 5 Generation Five is an individual monitor with several DSP profiles.
- KRK lists three listening profiles and positions Mix Mode as suitable for critical listening.
- The manufacturer’s positioning doesn’t demonstrate an advantage over other brands.
Joybuy products
Related products coming soon.
Frequently asked questions
How should I position two monitors to assess the stereo mix?
Start with a symmetrical setup around your fixed listening position. Genelec’s placement guidance describes a triangle with around 60° between the monitors and equal conditions on the left and right. See what’s practical in your room; don’t treat a measurement that won’t fit as a buying requirement.
Can I connect monitors directly to my computer?
That depends on your computer’s outputs and the inputs on your chosen model. PreSonus lists, among other connections, a 3.5 mm stereo input for the Eris 3.5 2nd Gen; Yamaha lists XLR/TRS for the HS5. Before buying, check which connection and cables you’ll need.
How can I assess the bass without turning my home studio up loud?
Compare stated frequency ranges only alongside their measurement tolerances, and check the balance at your usual listening volume. ISO 226:2023 describes frequency-dependent equal-loudness contours under specified test conditions; it isn’t a test of these speakers or your room.