If you only have one free socket, look for a stereo set with one power supply for both speakers. Two separately powered monitors are an option if you can also provide the extra mains socket, signal cables and space they need. Check that the inputs match your audio source, too.
Who is this choice relevant to?
Mix engineer with one free socket
You want to listen to the left and right channels of your mix without needing a separate mains socket for each speaker. Check that your chosen set really does use one power supply for both speakers; IK Multimedia and ADAM Audio describe this setup for the sets mentioned.
Mix engineer with a small desk
You need to fit two speakers around your usual listening position and want to know which connection will work with your computer or audio interface. Measure the space available for both cabinets and compare the connections on your chosen model with your source.
Mix engineer who also assesses the low end
You don’t want to base decisions about the low end on a frequency limit alone. Check the stated dB condition, placement and room acoustics, too; Genelec notes that room acoustics also affect what you hear.
What should you look for when buying?
Compact set with one power supply
Choose this if: you have one socket and enough room for both speakers at your listening position.
Bear in mind: you’ll still need a cable between the speakers. A stated low-frequency limit doesn’t prove that the low end will sound flat where you listen.
Stereo set powered through one speaker
Choose this if: you have room for two cabinets and need connections such as XLR/TRS, RCA or stereo mini-jack.
Bear in mind: check the mains voltage of the version on offer and only compare frequency limits when they use the same dB condition.
Two individually powered monitors
Choose this if: you have two mains sockets and suitable outputs on your interface.
Bear in mind: you’ll need two monitors and two mains sockets for stereo; placement and room acoustics still matter.
| What to consider |
What should you check? |
Who is this important to? |
| Number of sockets |
Count the mains plugs needed for the complete stereo set and check whether a cable is needed between the speakers. |
If I only have one free socket, I want to know whether one power supply powers both speakers. Around 39% of consumers focus mainly on the number of sockets required. |
| Connection to your audio source |
Note the outputs on your computer or interface and compare them with the inputs on the exact model. |
I want to connect my existing computer or audio interface without choosing an unsuitable signal path. Around 23% of consumers prioritise compatibility with their existing audio source. |
| Positioning two speakers |
Measure the space available for both cabinets and angle them towards your usual listening position. |
I want to position both speakers around my listening spot, even if my desk has limited space. Around 23% of consumers focus mainly on positioning two speakers. |
| Assessing the low end |
Check the dB condition given for the stated frequency limit, and assess the room and setup separately. |
I want to know what a low-frequency specification does and doesn’t tell me before making mix decisions. Around 15% of consumers make assessing the low end their main buying concern. |
Common buying mistakes
-
Mistaking a single active monitor for a stereo set
The Genelec 8010A is sold individually and comes with its own mains cable. So one unit isn’t a complete stereo set.
Before buying, check how many speakers are included and count the mains sockets you’ll need for the left and right channels.
-
Assuming a lower Hz figure means better-sounding bass
IK Multimedia lists 45 Hz at −10 dB for the iLoud Micro Monitor. Yamaha lists 60 Hz at −10 dB and 83 Hz at −3 dB for the HS4. These figures use different measurement conditions, and the room also affects what you hear at your listening position.
Only compare frequency limits when the dB condition matches, and take your setup and room into account.
-
Checking only the number of mains plugs
A set with one power supply still needs a signal connection to the second speaker and must be compatible with your audio source.
Map out the entire signal path: audio source, input, powered speaker, connection to the second speaker and mains socket.
Brands to compare
The features listed apply to the specific models and versions below, not automatically to every product from each brand.
IK Multimedia
The iLoud Micro Monitor is a compact stereo set with analogue inputs.
- IK Multimedia lists two speakers, one power supply and a 2 m connecting cable for the set.
- The stated low-frequency limit of 45 Hz is at −10 dB; this doesn’t prove the low end will sound flat where you listen.
ADAM Audio
The D3V is a desktop set that you can connect to a compatible computer via USB-C.
- ADAM Audio’s manual lists one power supply and one mains cable for the set.
- Check that the USB-C connection is compatible with your audio source; this power setup doesn’t automatically apply to other ADAM monitors.
Yamaha
Yamaha specifies the HS4 as a pair with several analogue inputs on the left speaker.
- According to Yamaha, the HS4 has XLR/TRS combo, RCA and stereo mini-jack connections, plus a speaker connection to the right speaker.
- Yamaha lists 60 Hz at −10 dB and 83 Hz at −3 dB; also check the mains voltage of the version on offer.
PreSonus
The Eris 3.5 2nd Gen is a compact pair of reference speakers with several analogue inputs.
- PreSonus lists balanced TRS and unbalanced RCA and stereo mini-jack inputs, plus tone controls, a headphone output and an included speaker cable.
- The stated frequency response starts at 80 Hz. If you’re looking for that version, check that it’s the Eris 3.5 2nd Gen without Bluetooth.
Genelec
The 8010A is a compact active monitor sold individually, with one XLR input per cabinet.
- Genelec lists one monitor and one mains cable per package.
- You need two units for stereo, each with its own mains socket. The stated low-frequency limit of 67 Hz is at −6 dB.
Related products
Related products will be available soon.
Frequently asked questions
Does every active studio monitor need its own socket?
No, it depends on the set. IK Multimedia lists one power supply for the pair of iLoud Micro Monitor speakers, while Genelec lists a mains cable with each individual 8010A. Count the sockets needed for the complete stereo setup.
How should I position two monitors to assess a stereo mix?
Position both speakers around your usual listening spot and assess the sound in the room where you work. Genelec notes that both speaker placement and room acoustics affect what you hear.
Does Dutch statutory cover end when the manufacturer’s warranty expires?
Not automatically: according to the Dutch government, the Netherlands has no fixed statutory warranty period. What you can expect in terms of a product’s lifespan depends, among other things, on the product, its price and the information provided at the time of sale.
What should I look for in an electrical model intended for the Dutch market?
Check that the version on offer has the required CE marking and that its mains voltage is compatible with your socket. The Dutch government states that electrical products in the EU must have a CE marking; Yamaha advises checking the voltage on the rear panel for the HS4.