Who are these monitors for?

Creator with one spare power socket

You want to compare two audio channels through speakers, but can only spare one power socket for the pair at your desk. So check where the power supply connects and whether the linking cable can span the distance between the speakers. ADAM Audio specifies a 2-metre cable between the speakers for the D3V.

Editor using a computer or audio interface

Your choice depends on the outputs you use to play back audio recordings. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS inputs; PreSonus lists TRS, RCA and ⅛-inch inputs, among others, for the Eris 3.5 2nd Gen.

Mixer looking for flexible monitor placement

You want to position the left and right speakers to suit your listening position, and can use separate power sockets if needed. Genelec points out that the acoustic environment affects the sound you hear.

What should you look for?

Start by checking how many power sockets are available, then look at the source inputs, cable length and exactly what’s included in the set.

Pair with one powered master speaker

Choose this when: you can only spare one power socket and both speakers can be positioned within reach of their linking cable.

Trade-off: the cable linking the speakers limits how far apart they can be; also check that the inputs on the exact set suit your audio source.

Two separately powered monitors

Choose this when: you can use two power sockets for stereo and need separate inputs, such as XLR.

Trade-off: you need two monitors and two power sockets; the Genelec 8010A is sold individually.

What to consider What should you check? Who is this important for?
Power connections Check where the power supply connects, how many speakers are included and how long the linking cable is. If I can only spare one power socket at my desk, I want to know whether one connection is enough for the pair. Around 36% of consumers consider the number of power connections their top buying priority.
Connection to the audio source Compare the outputs on your computer or interface with the inputs on the exact version. If I play audio recordings from my computer or interface, I want to connect everything without guesswork. Around 29% of consumers prioritise source compatibility.
Positioning for your listening setup Measure the distance between the intended left and right speaker positions and compare it with the cable length. If I want to position the monitors around my listening position, the linking cable needs to accommodate that setup. Around 21% of consumers consider placement their main buying priority.
Complete stereo pair Check how many speakers are included and which power and signal cables come with them. If I want to compare two channels, I need to know whether the offer includes a complete pair or just one monitor. Around 14% of consumers prioritise what’s included in the set.

Buying pitfalls

  • Assuming every active speaker has its own mains plug

    Linked stereo systems and separately powered monitors use different power setups. The word ‘active’ on its own doesn’t tell you how many sockets the whole pair needs.

    For the exact set, check where the power supply connects and count the mains plugs needed for both channels.

  • Comparing a monitor sold individually with a pair

    The Genelec 8010A is described as an individual monitor, while PreSonus sells the Eris 3.5 2nd Gen as a pair. This makes a difference to what you need to buy for stereo.

    Compare the complete set and check how many speakers and connection cables are included in the offer.

  • Assuming a compact set will suit every desk setup

    The cable linking the speakers may limit the distance between them. For the ADAM Audio D3V, the manufacturer specifies a 2-metre linking cable; according to IK Multimedia, the iLoud Micro Monitor uses a model-specific four-pin cable.

    Measure the cable route between the intended positions before choosing a set.

Relevant brands

ADAM Audio

According to ADAM Audio, the D3V is a compact desktop stereo system with USB-C and balanced TRS inputs.

  • ADAM Audio lists placement controls and a 2-metre linking cable.
  • Check that the cable length, power supply and inputs suit your workspace; stated sound qualities are not based on an independent listening test.

PreSonus

The Eris 3.5 2nd Gen is sold as a pair and, according to PreSonus, has analogue TRS, RCA and ⅛-inch inputs.

  • PreSonus lists a speaker cable, audio cables and a headphone output.
  • Check the full model name: the Eris 3.5 2nd Gen is not the same version as the separately listed Eris 3.5BT.

IK Multimedia

According to IK Multimedia, the iLoud Micro Monitor is a linked stereo system with an active left speaker and a passive right speaker.

  • The linked setup may be worth considering if you’re looking for one powered master speaker.
  • The replacement cable is model-specific and has four pins; check the cable length of the set on offer.

Genelec

The 8010A is an active monitor sold individually, with an analogue XLR input.

  • Genelec lists one monitor and one mains cable per pack.
  • For stereo, you need two units and two power sockets; claims about audio reproduction come from the manufacturer and are not based on a comparative listening test.

Joybuy products

Related products coming soon.

Frequently asked questions

Do two active studio monitors always need two power sockets?

No, it depends on the power setup. According to the ADAM Audio manual, the D3V’s power supply connects to the left speaker, and the speakers are linked to each other. Genelec lists one mains cable per 8010A monitor, so you need two units for stereo.

How do I check whether the monitors will work with my computer or audio interface?

First, compare the outputs on your source with the inputs on the exact monitor version. ADAM Audio lists USB-C and balanced TRS for the D3V; PreSonus lists TRS, RCA and ⅛-inch inputs, among others, for the Eris 3.5 2nd Gen.

What should I bear in mind when positioning and cleaning them?

Plan your listening position and the space for both speakers before laying the cables; Genelec points out that the acoustic environment affects the sound. Follow the model’s manual when connecting, disconnecting and cleaning the monitors. ADAM Audio instructs you to switch off the D3V system first.

What safety information should I check for an electrical model in the Netherlands?

Check the documentation and mains specification for the specific version. The Dutch government’s Ondernemersplein explains that electrical appliances are subject to applicable product requirements, and that the manufacturer must affix the required CE marking to a compliant product and draw up an EU Declaration of Conformity. A general model description does not confirm that every version meets these requirements.

Can I return a stereo pair bought online within 14 days?

For a distance purchase covered by the right of withdrawal, the usual period is 14 days from delivery. The European Union’s Your Europe website says that exceptions may apply and that the buyer may have to pay the return costs if the seller informed them of this correctly in advance.