Who are these monitors for?

Editors with a small desk

You edit port recordings at close range and need space for a stereo pair without compromising on a symmetrical setup. Genelec recommends positioning your listening spot and two monitors to form an equilateral triangle.

Editors assessing ambient details

You want to assess movement and subtle sounds in a recording. Monitor placement and reflections in the room are important considerations; Genelec notes that calibration won’t necessarily solve every acoustic problem.

Editors assessing low port and engine sounds

You regularly work with deep rumbles and want to know whether a compact monitor can provide a useful reference. Look beyond the frequency limit to the measurement conditions and the effect of the room.

What should you look for when buying?

Consideration What should you check? Who is this important for?
Desk placement Measure the space available for both monitors and check whether you can position them at equal distances and heights, angled towards your listening spot. If your desk is short on space, you’ll want to position a stereo pair symmetrically without compromising your listening position. Around 26% of consumers say desk placement is their top priority.
Detail and stereo positioning Check whether the monitors can be set up symmetrically and, if necessary, listen on a second playback system too. If you want to assess individual events and their position in a recording, the setup and listening position matter. Around 26% of consumers put listening detail and stereo positioning first.
Low frequencies Only compare frequency limits when they use the same dB tolerance, and bear the room acoustics in mind. If deep port or engine sounds are an important part of your editing, you’ll want to know the measurement conditions behind the stated limit. Around 21% of consumers say bass reproduction is their top priority.
Connections Make a note of your equipment’s audio outputs and check the input and required cables for each model. If you’re using equipment you already own, you’ll want to know in advance whether the monitors can connect to it. Around 16% of consumers say connectivity is their top priority.
Complete stereo pair Check whether the box contains one monitor or a pair, and which cables are included. If you want to work in stereo straight away, you’ll want to know how many speakers and which accessories you’ll receive. Around 11% of consumers say a complete set is their main requirement.

Common buying mistakes

  • Mistaking a single monitor for a complete stereo pair

    A box may contain one speaker or a pair. Genelec lists one 8010A monitor per box, while PreSonus sells the Eris 3.5 2nd Gen as a pair.

    Check what’s included in the box and the connections before comparing models or sets.

  • Taking the lowest frequency limit as a complete bass test

    Frequency limits measured at different dB tolerances aren’t directly comparable. The room can also affect how low-frequency sound is perceived.

    Note the dB tolerance alongside the frequency limit and use a second listening reference if needed.

  • Assuming similar model names mean the same version

    PreSonus Eris E3.5 and Eris 3.5 2nd Gen are different model names. Specifications for iLoud Micro versions may also vary, even when they’re referred to by the same abbreviated name.

    Check the full model name, generation, inputs and power supply for the version you’re considering.

Brands to consider

PreSonus

The manufacturer describes the Eris 3.5 2nd Gen as a compact stereo set with several analogue inputs, designed for desk use.

  • The manufacturer lists TRS, RCA and 3.5 mm inputs, a headphone output and included cables for the Eris 3.5 2nd Gen.
  • The stated range starts at 80 Hz, with no dB tolerance specified. Don’t use this figure as a direct comparison of bass reproduction. The older Eris E3.5 is a different model.

ADAM Audio

ADAM Audio describes the T5V as a nearfield monitor for small control rooms. According to the manufacturer, the A7V has a larger woofer and DSP settings.

  • The manufacturer lists a 5-inch woofer and rear bass-reflex port for the T5V; the A7V has a 7-inch woofer and DSP settings.
  • The dimensions and adjustment options need to suit your room and setup. These product specifications and suitability claims aren’t based on an independent comparative test.

Genelec

The 8010A and 8020D are two different sizes of nearfield monitor.

  • Genelec lists an XLR input for the 8010A and dimensions of 242 × 148 × 142 mm, including Iso-Pod, for the 8020D.
  • According to Genelec, the 8010A box contains one monitor. Check the input and how many speakers you need for your setup.

Yamaha

The HS5 is an active nearfield monitor sold individually, with XLR and TRS inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM as adjustment options.
  • The stated lower limit is 54 Hz at −10 dB and 74 Hz at −3 dB. Bear the measurement conditions in mind when comparing frequency limits.

IK Multimedia

IK Multimedia presents the iLoud Micro Monitor as a compact stereo system.

  • For the version described, the manufacturer lists a pair, compact dimensions, and XLR and RCA inputs.
  • Specifications can vary between versions sold under the same product name. Check the full version details and connections for the product on offer.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors for stereo editing?

Angle both monitors towards your listening spot and aim for equal distances and heights, with a symmetrical setup. Genelec recommends an equilateral triangle with a 60° angle between the monitors; your room’s acoustics will still have an effect.

Can room adjustment completely fix poor acoustics?

No. Adjustment won’t necessarily solve every acoustic problem. Genelec stresses that placement and the room itself remain important.

Is a manufacturer’s warranty the same as the statutory guarantee in the Netherlands?

No. According to the Rijksoverheid, there is no fixed statutory warranty period in the Netherlands; if a product is faulty, you should contact the seller. A manufacturer’s warranty is in addition to your statutory rights.

Do you always have exactly 14 days to change your mind when buying online?

For online purchases from a business, the Rijksoverheid says you generally have a 14-day cooling-off period. Not every transaction counts as a distance sale, and exceptions may apply, so check the terms that apply to your purchase.