Who are studio monitors for podcast editing on a small desk suitable for?

Editor with limited desk space

You want to position two speakers around a screen without compromising your listening position. So consider not only their dimensions, but also whether you have room to angle them towards where you sit. PreSonus recommends using an equilateral triangle as a starting point for positioning.

Editor with a simple computer setup

You want to listen to edits directly from your computer, so check whether USB-C playback or the analogue output you already have suits your setup. ADAM Audio lists USB-C and balanced TRS inputs for the D3V; PreSonus lists analogue inputs for the Eris 3.5 2nd Gen.

Editor with an audio interface

You want to use your existing analogue outputs, so check in advance that the inputs and cables are suitable and confirm what is included in the sale. Genelec specifies one XLR input per monitor for the 8010A; a Dutch listing consulted for the 8010AP is for a single unit.

What should you look for in studio monitors for a small desk?

Compact stereo pair with analogue input

Choose this when: you have limited space and use a suitable analogue output; IK Multimedia says the iLoud Micro Monitor consists of two speakers with RCA and 3.5mm inputs.

Trade-off: IK Multimedia’s stated lower limit of 45 Hz at −10 dB is not directly comparable with measurements taken at a different limit, such as −6 dB.

Desktop set with USB-C playback

Choose this when: you want to play audio directly from a compatible computer; ADAM Audio also lists balanced TRS inputs for the D3V.

Trade-off: USB playback does not replace a microphone input for recording; ADAM Audio specifies 48 kHz/16-bit for USB mode.

Analogue set with front-panel controls

Choose this when: a stereo pair with analogue inputs and a front-panel headphone output suits your workflow; PreSonus lists these connections for the Eris 3.5 2nd Gen.

Trade-off: check the version: the Eris 3.5 2nd Gen is not the separate 3.5BT model.

Individual compact monitors with XLR

Choose this when: your audio interface has suitable XLR outputs and you want to put together your own pair of compact monitors; Genelec specifies one XLR input per 8010A.

Trade-off: a Dutch listing consulted for the Genelec 8010AP is for one monitor, so check how many units and cables you need for stereo.

Desktop set with wired input and Bluetooth

Choose this when: you want Bluetooth for occasional use as well as a wired connection for editing; JBL Professional lists several wired inputs and Bluetooth for the 104-BT.

Trade-off: Bluetooth support does not prove that the connection is suitable for accurate synchronisation during editing.

Measure the space for both speakers, then check which connection suits your computer or interface. The percentages below show the proportion of consumers who prioritise each buying consideration when making this choice.

Buying consideration What to look for Who is this important to?
Space and positioning Measure the space for two speakers and cables; check whether you can angle them towards your listening position. I have limited space and want to position both speakers next to my screen. Around 33% of consumers prioritise suitable dimensions and positioning.
Checking vocals Check whether you can angle both speakers towards your listening position; also compare spoken-word clips on headphones. I want to assess edited voices from a practical listening position. Around 27% of consumers prioritise a setup that works for this.
Connections Check the outputs on your computer or interface and make sure you have suitable cables. I want to connect my existing computer or interface without choosing an unsuitable input. Around 20% of consumers prioritise compatible connections.
Complete stereo pair Check whether the box contains one monitor or a pair, and which connection cables are included. I want to know in advance what I need for a working stereo pair. Around 20% of consumers focus on having a complete setup.

Avoid common mistakes when buying compact studio monitors

  • Mistaking the price of one monitor for the price of a stereo pair

    A single monitor and a set of two are not the same product offering. A Dutch listing consulted for the Genelec 8010AP says it is sold individually, while the cited PreSonus Eris 3.5 2nd Gen listing is for a pair.

    Before you choose, check how many speakers are included and whether you need a second unit and suitable cables for stereo.

  • Treating frequency limits as directly comparable performance figures

    Manufacturers may specify a frequency limit under different measurement conditions. IK Multimedia gives 45 Hz at −10 dB for the iLoud Micro Monitor; ADAM Audio gives 45 Hz at −6 dB for the D3V. These figures are not directly comparable.

    Check the measurement basis for the exact model, and focus on listening to spoken-word clips in your own setup when editing podcasts.

  • Measuring only the size of the cabinets

    As well as leaving room for the cabinets, you need a practical listening position. PreSonus recommends angling the speakers towards where you sit and using tweeters at ear height as a starting point.

    Measure the space next to your screen and check that you can angle the monitors and position them at a suitable height.

  • Confusing Bluetooth with suitable playback for editing

    Bluetooth support alone does not tell you whether picture and sound will stay in sync well enough for precise editing. IK Multimedia also says that Bluetooth latency on the iLoud Micro Monitor depends on the source device.

    Check the wired input on the exact model for your editing workflow, and use it when synchronisation matters.

Compact studio monitor brands to consider

IK Multimedia

The iLoud Micro Monitor is an active stereo pair for a desk setup with a suitable analogue output.

  • IK Multimedia lists two speakers, RCA and 3.5mm inputs, and a desktop setting.
  • According to IK Multimedia, Bluetooth latency depends on the source device. Bluetooth alone therefore does not tell you whether the connection is suitable for precise editing.

ADAM Audio

The D3V is an active desktop set for anyone looking for USB-C playback or balanced TRS inputs.

  • ADAM Audio lists supplied feet and positioning settings. According to ADAM Audio, the internal DSP operates at 48 kHz/16-bit in USB mode.
  • USB-C playback does not replace a microphone input if you need one for recording.

PreSonus

The Eris 3.5 2nd Gen is an active stereo pair with analogue inputs and front-panel controls.

  • PreSonus lists TRS, RCA and 3.5mm inputs, tone controls and a headphone output.
  • Check the version: the Eris 3.5 2nd Gen without Bluetooth is not the same model as the separate 3.5BT.

Genelec

The 8010A is a compact, active monitor sold individually for setups with suitable XLR connections.

  • Genelec specifies one XLR input and dimensions of 195 × 121 × 115 mm, with Iso-Pod.
  • A Dutch listing consulted for the 8010AP is for one monitor; you need two units for a stereo pair.

JBL Professional

The 104-BT is a desktop stereo set for anyone who wants wired inputs and Bluetooth in one system.

  • JBL Professional lists several wired inputs, Bluetooth 5.0 and a headphone socket that mutes the speakers.
  • The Bluetooth specification alone does not support a judgement about synchronisation during precise editing.

Joybuy products for podcast editing on a small desk

Related products coming soon.

Frequently asked questions about studio monitors for podcast editing

How should I position two monitors on a small desk?

Angle both speakers towards your listening position and try to get the tweeters at ear height. PreSonus recommends an equilateral triangle as a starting point, not a guarantee that will work in every room; also check the positioning instructions for your chosen model.

Can I listen through the speakers while recording a podcast?

If an open microphone picks up sound from the speakers, feedback can occur. When recording with an open microphone, it is better to monitor through headphones or switch the speakers off; you can use the monitors later while editing.

Do I still need an audio interface with a USB-C monitor set?

According to ADAM Audio, you can connect the D3V directly via USB-C to play audio from a compatible computer. Whether you need an interface for recording depends separately on your microphone and recording setup.

What cooling-off period and warranty apply to online purchases in the Netherlands?

According to ACM ConsuWijzer, the statutory cooling-off period for an online purchase generally runs until 14 days after the product has been delivered, subject to exceptions. The Dutch Government also says that if there is a problem with a product, you can ask the seller to put it right. Check which terms and exceptions apply to your purchase.

Does an electric studio monitor sold in the Netherlands need a CE mark?

According to the Dutch Government, electrical appliances placed on the market in the EU must carry a CE mark. Check the marking and product information for the specific product.