Who are these studio monitors for?

Editor with a crowded dual-screen desk

Wants to place a stereo pair without the screens getting in the way of a symmetrical setup on the left and right.

Podcast editor focused on speech

Evaluates conversations and edits between takes, and doesn’t want to mistake specifications for a prediction of how a monitor will sound in their own room.

Editor with an audio interface

Wants to connect their existing equipment’s outputs, so pays attention to the difference between balanced and unbalanced inputs.

What should you look for when choosing?

First, measure your space and decide where you’ll sit. Then check the connections against your equipment, and only then choose between a compact stereo pair and individual monitors.

What to consider What should you check? Who is this most relevant to?
Positioning beside two screens Measure the space available on both sides and check whether you can aim the pair towards your listening position from a similar distance and height. With two screens, I want to know whether both speakers can be positioned properly before choosing their cabinet size; around 36% of consumers prioritise positioning.
Evaluating speech and edits Compare the adjustment options and assess the setup from your listening position; only compare frequency ranges when they’re measured on a similar basis. When editing speech, I want to assess conversations and transitions without treating a specification as a guarantee of sound quality; around 29% of consumers prioritise speech evaluation.
Connecting to existing equipment Note the output on your computer or interface, then compare it with the monitors’ input type and the cables you’ll need. If I already use an audio interface, I want to know in advance whether its outputs will work with the monitors; around 21% of consumers prioritise connection compatibility.
Evaluating music and bass Decide whether you want to assess music and effects as well as speech; check the cabinet dimensions and how the stated frequency ranges were measured. When I also edit music and effects, I want to weigh up the space available for positioning against those listening tasks; around 14% of consumers prioritise music and bass.

Common buying mistakes

  • Counting the screens but not planning the listening setup

    Screens and other hard surfaces can reflect sound. An asymmetrical left-right setup can also affect the stereo image.

    Draw your screens, speakers and listening position to scale before choosing a cabinet size.

    A suitable setup may require a different desk layout.

  • Assuming a model name always means a stereo pair

    The iLoud Micro Monitor and Eris 3.5 2nd Gen are specified as pairs; the JBL 305P MkII and Yamaha HS5 are individual monitor models.

    Check how many speakers are included in the specific listing and what you’ll need for two channels.

  • Treating the lowest frequency figure as decisive proof

    A frequency limit at −10 dB isn’t directly equivalent to the same figure at −3 dB. Positioning and the room also affect what you hear from your listening position.

    Only compare frequency ranges when the measurement tolerance is the same, and take the setup into account.

Brands to consider

IK Multimedia

The iLoud Micro Monitor is a compact active stereo pair for a desk with limited space.

  • IK Multimedia’s specifications state that the pair includes two speakers with analogue RCA and 3.5mm stereo inputs. Each speaker measures 180 × 135 × 90 mm.
  • The specifications don’t list balanced TRS or XLR inputs. The stated range starts at 45 Hz at −10 dB; don’t compare this directly with figures measured at a different point.

PreSonus

The Eris 3.5 2nd Gen is sold as a pair and has several analogue inputs.

  • PreSonus specifies balanced 6.35mm TRS inputs, unbalanced RCA and 3.5mm stereo inputs, high- and low-frequency controls, and a front headphone output.
  • The manufacturer gives a frequency response of 80 Hz to 20 kHz. This specification alone doesn’t predict how speech will sound in your workspace.

JBL Professional

The 305P MkII is an individual active nearfield monitor with professional analogue inputs.

  • JBL specifies balanced XLR and 6.35mm TRS inputs, as well as Boundary EQ to adjust the sound when positioned near a desk or wall.
  • JBL’s claims about stereo imaging and accuracy are manufacturer claims, not measurements taken in your workspace. Check whether the specific listing includes one speaker or a pair.

Yamaha

The HS5 is an individual active 5-inch nearfield monitor that requires space for each cabinet.

  • Yamaha specifies XLR and 6.35mm inputs, ROOM CONTROL and HIGH TRIM. Each HS5 measures 170 × 285 × 222 mm.
  • The frequency range of 54 Hz–30 kHz is stated at −10 dB. Positioning and the room will still affect what you hear.

ADAM Audio

The T5V from the active T Series is an individual nearfield monitor with XLR and RCA inputs.

  • ADAM Audio lists a rear-facing bass reflex port and adjustable high- and low-frequency controls.
  • According to ADAM Audio, the T5V accepts 100–240 V at 50–60 Hz. Check which version and plug are supplied with the specific listing. Claims about the listening area are manufacturer claims.

Joybuy products

Related products coming soon.

Frequently asked questions

Do the speakers need to sit right next to my two screens?

No, not if that results in an uneven listening setup. Aim a left-right pair towards your listening position and try to keep the height and distances similar. Genelec recommends a 60-degree angle between the monitors and the listening position, forming the point of an equilateral triangle; screens can reflect sound.

Can I listen through the speakers while my podcast microphone is recording?

For the Vocaster Broadcast Kit, Focusrite recommends using headphones while recording and muting the speaker outputs to avoid feedback. Check how to do this with your own interface or recording setup.

What do I need to connect my monitors?

Compare the analogue outputs on your computer or audio interface with the inputs on the exact monitor model. The PreSonus Eris 3.5 2nd Gen has balanced 6.35mm TRS inputs, among others; each JBL 305P MkII speaker has XLR and 6.35mm TRS inputs; the iLoud Micro Monitor has RCA and 3.5mm stereo inputs.

Do I automatically get exactly two years of statutory warranty in the Netherlands?

No. According to the Dutch government, there’s no fixed statutory warranty period in the Netherlands. If a product doesn’t meet the expected standard, the seller must provide a solution when there’s a valid issue; any manufacturer’s warranty is in addition to this.

What should I look for in product safety and CE marking?

According to the European Commission, CE marking is required for products covered by applicable harmonised EU rules. The manufacturer applies the marking; there’s no central EU body that issues a certificate for it. Check the product information for the specific version.