Who are these monitors for?

Podcast editor who critically compares speech

You want to listen to edited clips from a fixed, repeatable position. Genelec highlights the importance of similar conditions for the left and right monitors; the room and positioning matter too.

Editor who adjusts their desk height

You switch between sitting and standing and want both speakers to be aimable at your listening position at either height. Check the feet or mounting options for the specific model; ADAM Audio, for example, lists these options for the D3V.

Editor with an existing audio interface

You want to connect your current stereo outputs, so you’re comparing the connections available on each model. Manufacturers list options including USB-C, TRS, RCA, stereo mini and XLR; the word ‘active’ doesn’t tell you which input you need.

What should you look for?

First check that you can position the speakers properly at both desk heights. Then look at the signal connection and what you need for a complete stereo setup.

Consideration What to look for Who is this most important for?
Assess speech clips consistently Can both speakers sit at the same height and point towards the same listening position? Compare representative clips in your own workspace. If I want to assess differences between edited speech clips, I don’t want a changing listening position to affect my judgement. Around 36% of consumers prioritise consistent assessment of speech.
Positioning when sitting and standing Measure the available space with the desk in both positions, and check that the feet or mounting options allow you to point the speakers where you want. When I alternate between sitting and standing, I want to be able to aim the speakers at my listening height in both positions. Around 29% of consumers give top priority to positioning at different desk heights.
Connecting to your existing equipment Note the stereo outputs on your computer or interface and compare them with the inputs on the exact model, such as USB-C, TRS, XLR, RCA or stereo mini. If I want to keep using my current computer or audio interface, the signal path needs to match the inputs. Around 21% of consumers put this connection at the top of their list.
A complete stereo setup Check how many speakers, cables and other necessary components are included in the package. When I want to connect a stereo pair, I want to know in advance which components I’ll actually need. Around 14% of consumers focus mainly on what’s included and any additional requirements.

Common pitfalls

  • Mistaking a single monitor for a stereo pair

    Yamaha specifies the HS3 as a pair, while Genelec lists one monitor per 8010A package. So an offer for one 8010A doesn’t automatically give you a complete stereo setup.

    Check what’s included in the exact offer and see what you’ll need for two channels.

  • Comparing frequency limits without checking the measurement conditions

    Yamaha lists the HS3 at 85 Hz at −3 dB, while Genelec lists the 8010A at 67 Hz at −6 dB. As these figures are given at different tolerances, they aren’t a direct comparison of bass response.

    Only compare frequency limits when the measurement conditions match. Also assess how speech clips sound in your own workspace.

  • Assuming a placement setting can make up for poor positioning

    Genelec explains that reflections and the relative positioning of monitors can affect the stereo image. An adjustable monitor won’t automatically make an unsuitable position work.

    First plan to position the left and right monitors as similarly as possible at both desk heights. Then use the model’s settings for their intended purpose.

Brands to consider

ADAM Audio

The D3V is a compact active desktop system with USB-C and analogue connection options.

  • ADAM Audio lists removable feet and 3/8-inch mounting points. Check whether these suit your preferred listening height.
  • An independent review of the D3V notes that it doesn’t have Bluetooth.

Yamaha

According to Yamaha, the HS3 is a compact analogue system sold as a pair.

  • The Dutch product specification lists combo, RCA and stereo mini inputs, along with low- and high-frequency controls.
  • The specification doesn’t list a USB-C input. Its stated frequency limit of 85 Hz at −3 dB isn’t directly comparable with figures measured at a different tolerance.

Kali Audio

The LP-UNF is a desktop system with digital and analogue inputs.

  • Kali Audio specifies USB-C, Bluetooth, RCA and balanced TRS, as well as settings for different desk and wall positions.
  • Check that the speakers and their positioning options will physically fit on and around your desk.

Genelec

The 8010A is a compact monitor sold individually, with an analogue XLR input.

  • Genelec lists an Iso-Pod and room settings.
  • According to Genelec, the package contains one speaker; you’ll need two for stereo.

JBL Professional

The 104-BT is a compact desktop system with wired inputs and Bluetooth as an additional playback option.

  • JBL Professional lists a front-mounted volume control and a headphone output that mutes the speakers.
  • Bluetooth won’t necessarily suit every editing workflow; check which connection you want to use for your actual work.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should I set up monitors if I alternate between sitting and standing?

Aim both speakers at your listening position and keep their height and position as similar as possible. Assess the setup at both desk heights, and check whether the feet or stands can be adjusted on the exact model.

Can I connect active monitors directly to my computer?

That depends on the monitor’s inputs and your computer’s outputs. ADAM Audio lists USB-C for the D3V; Yamaha lists analogue inputs for the HS3, and Genelec lists one analogue XLR input per 8010A. Compare the connections and cables you’ll need first.

How can I check whether a set is complete for stereo?

Check how many speakers are in the package and which cables and other components are included. Yamaha specifies the HS3 as a pair, while Genelec lists one 8010A per package; you’ll need two of that model for stereo.

What if I also record with an open microphone while editing?

Use a suitable wired pair of headphones to monitor a recording, and treat playback through monitors as a separate listening setup. Shure lists wired headphones as part of a podcast setup; whether this approach suits your recording depends on your microphone and recording setup.

What safety rules apply to electrical monitors sold in the Netherlands?

According to Business.gov.nl, electrical and electronic equipment sold in the Netherlands must comply with the applicable European rules. Where CE marking is required, the manufacturer’s obligations include a conformity assessment, CE marking and an EU declaration of conformity. This alone doesn’t tell you how a monitor will sound in your workspace.