Who are these monitors for?

Podcast creator with one spare socket

Edits at a desk and wants a stereo pair that doesn’t need a separate mains socket for each speaker. Yamaha describes the HS3 and HS4 as a combination of one active and one passive speaker.

Dialogue editor at a small desk

Wants to assess speech, transitions and differences between the left and right channels, while still being able to position both speakers properly. PreSonus recommends a symmetrical setup in relation to the listening position.

Editor with an audio interface

Wants to connect the monitors to existing line outputs and sometimes listen through headphones. Yamaha, PreSonus and Mackie describe monitor and headphone connections across their respective product ranges.

What should you look for?

What to consider What should you check? Who is this important for?
Number of sockets needed Check how many mains plugs the complete pair needs and how the second speaker connects. If I only have one spare socket, I want to know how both speakers are powered. Around 36% of consumers prioritise the number of power connections needed.
Assessing speech Check whether both speakers can be positioned symmetrically around your listening position; only compare frequency limits when the measurement tolerances are the same. If you want to assess podcast speech and differences between clips, you should also consider speaker placement and room acoustics. Around 29% of consumers put this first.
Connecting to your equipment Compare your computer or interface output with the inputs on the pair, and check which cables are included. If I want to use my existing audio interface, the connections and cables need to be compatible. Around 21% of consumers choose this as their main consideration.
Placement and quiet listening Measure the space available for both speakers and check whether the headphone output mutes or disconnects them. For a shared workspace, I want to be able to position the speakers appropriately and listen through headphones when needed. This is the main concern for around 14% of consumers.

Avoiding common buying mistakes

  • Assuming every active pair needs two sockets

    Power arrangements vary by model. Yamaha describes the HS3 and HS4 as having one active speaker with a built-in amplifier and one passive speaker.

    Check the exact pair to see how many mains plugs it needs and how the speakers connect to each other.

  • Mistaking a single monitor for a stereo pair

    You need two speakers for left and right; product ranges may be sold as pairs or as individual speakers.

    Check whether the box contains a pair and whether the connecting cable is included.

  • Treating a frequency limit or tone control as a guarantee of reliable editing

    The measurement tolerance for a frequency limit and your room’s acoustics affect how you should assess specifications and sound.

    Only compare frequency figures under the same measurement conditions, and plan for a practical, symmetrical setup.

Brands to consider

Yamaha

According to Yamaha, the HS3 and HS4 are compact monitor pairs with one active and one passive speaker.

  • For the HS3, Yamaha lists combination XLR/TRS, RCA and stereo mini-jack inputs, as well as room and high-frequency controls.
  • The HS3’s stated frequency limit of 85 Hz at −3 dB is a specification, not a measurement in your room.

PreSonus

The Eris 3.5 2nd Gen is a compact pair with a range of line inputs and a headphone output.

  • PreSonus lists ¼-inch TRS, RCA and stereo mini-jack inputs, tone controls and an included connecting cable.
  • Check the power arrangement and the configuration of the pair on offer; brand claims about playback accuracy are not an independent comparison.

M-Audio

M-Audio offers the BX3 as a pair, including for podcast use.

  • M-Audio lists several inputs, a headphone connection on the front and a switch for positioning the active speaker.
  • Check how many mains plugs the pair on offer needs; manufacturer statements about sound quality are not comparative listening tests.

Mackie

According to Mackie, the CR3.5 is designed for uses including podcast editing, and also offers controls for other listening needs.

  • Mackie lists TRS, RCA and 3.5mm inputs, as well as a headphone output that mutes the speakers.
  • The tone control can change the sound; the flat setting described by Mackie is not an independently verified performance measurement.

Edifier

According to Edifier, the MR4 consists of one active and one passive speaker, with a monitor mode and a separate music mode.

  • Edifier lists balanced TRS, RCA and AUX inputs, as well as a headphone output.
  • The sound characteristics mentioned are manufacturer claims; check that the version on offer matches the one you want.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do two studio monitors always need two sockets?

No, it depends on how the pair is configured. Yamaha describes the HS3 and HS4 as having a left speaker with a built-in amplifier and a passive right speaker. For other models, check how many mains plugs the complete pair needs.

How should I position a compact pair to compare podcast clips?

PreSonus recommends starting with a symmetrical triangle between the two speakers and your listening position. Also take the room and the instructions for your chosen model into account. This is the manufacturer’s placement advice, not a guarantee of a particular sound.

Is a stated frequency limit enough to compare monitors?

No, also consider the measurement tolerance and conditions. For the HS3, Yamaha lists 85 Hz at −3 dB, among other figures; don’t compare this directly with a frequency limit measured using a different tolerance. Speaker placement and room acoustics also affect what you hear.

Who should I contact if my monitor is faulty?

If your monitor is faulty, contact the retailer. According to the Dutch government, what you can expect from a product depends on factors including the product itself and the information provided; the Netherlands has no general fixed statutory warranty period.

Which marking is relevant for electrical studio monitors in the Netherlands?

According to the Netherlands Food and Consumer Product Safety Authority, CE marking is compulsory for electrical products. Check the documentation for the exact version: the marking itself is not an independent assessment of sound quality.