Who is this choice relevant to?

Piano mixers with a crowded desk

You work with two screens and want to check whether you can still position a speaker on each side in a similar way.

Piano mixers assessing the low end

You want to assess low piano notes, so you pay attention to measurement tolerances and the effect of your room.

Creators with an existing audio interface

You want to connect a stereo pair and check in advance that the inputs, number of speakers and any calibration equipment will work with your setup.

What should you look for when choosing?

For a desk with two screens, a practical, symmetrical stereo arrangement is the first thing to consider. Then compare low-frequency response, connections, adjustment options and what’s included in the box.

What to consider What should you check? Who is this important for?
Symmetrical stereo positioning Measure the available space and listening distance; check whether both monitors can be positioned at a similar height and distance. If two screens fill my desk, I still want to be able to position the monitors similarly on the left and right. Around 29% of consumers make symmetrical stereo positioning their top priority.
Low piano notes Compare frequency limits only when they use the same dB measurement tolerance, and take the positioning in your room into account. I want to assess the lower piano registers without treating different measurement figures as directly comparable. Around 24% of consumers give low-frequency response top priority.
Connecting to your equipment Match the inputs to your computer or audio interface; also check that you have two suitable output channels and the right cables. If I want to keep using my existing equipment, the connection needs to match the inputs on the model I choose. Around 18% of consumers put connectivity first.
The effect of your desk and room Check which manual settings or measurement-based calibration are available, and what’s included with the version you’re considering. I want to account for the effect of my desk and room, while knowing that settings can’t replace physical positioning. For around 17% of consumers, adjustment options come first.
A complete stereo pair Check whether the offer includes one monitor or a pair, and whether any required cables or a measurement microphone are included. Before choosing, I want to know what I need for two working channels and which components are included with that version. Around 12% of consumers put a complete stereo pair ahead of the other considerations.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    The Genelec 8010A and Yamaha HS5 are packaged individually, while the ADAM Audio D3V is described as a pair. What’s included therefore varies by model and version.

    Check the exact offer to see how many speakers are supplied and which connections you need for two channels.

  • Directly comparing frequency limits with different dB tolerances

    A lower limit measured at −10 dB means something different from one measured at −3 or −6 dB. The Hz figure alone therefore doesn’t let you compare low-frequency response directly.

    Check the measurement tolerance alongside the frequency figure, and assess the monitors in the room where you plan to use them.

  • Thinking room settings can replace good positioning

    A control or measurement-based calibration won’t change where the speakers are physically placed; positioning and reflections will still affect what you hear.

    Plan and measure the position of both monitors with the two screens in place first. Then compare the available settings.

Brands and models to consider

Genelec

The Genelec 8010A is a compact active monitor for a desk with little spare width either side of the screens.

  • Genelec says the monitor is 121 mm wide and has an analogue XLR input.
  • The box contains one monitor. Its stated lower limit is 67 Hz at −6 dB; you’ll need two for stereo. Assess low piano notes in your own setup too.

ADAM Audio

The D3V is a compact desktop system described as a pair; the T5V is an individual 5-inch nearfield monitor.

  • ADAM Audio says the D3V has USB-C, TRS connections and detachable stands.
  • According to the manufacturer, the T5V has a rear-facing bass reflex port. Bear this in mind if you’re placing it close to a wall.

Kali Audio

Kali Audio describes the LP-UNF as a nearfield monitor for mixing at a desk.

  • The manufacturer lists USB-C, balanced TRS and settings for different desk and wall positions.
  • The claim about a reliable stereo image comes from the manufacturer. Check whether both monitors can be positioned symmetrically either side of your two screens.

Yamaha

The Yamaha HS5 is an individually packaged 5-inch nearfield monitor for a desk with room for two cabinets.

  • Yamaha lists a width of 170 mm, XLR and balanced TRS inputs, and ROOM CONTROL and HIGH TRIM controls.
  • Its stated lower limit is 74 Hz at −3 dB. You’ll need two for stereo; don’t compare this frequency limit directly with figures measured using a different tolerance.

IK Multimedia

The iLoud Micro Monitor Pro combines a compact size with ARC X measurement-based calibration from IK Multimedia.

  • IK Multimedia lists XLR and RCA connections on the monitor, and a measurement microphone with the pair version.
  • Check carefully that you’re choosing the pair version. Measurement-based calibration won’t, by itself, create a symmetrical speaker arrangement.

Joybuy products

Related products coming soon.

Frequently asked questions

Where should I start when positioning monitors with two screens on my desk?

Start with a symmetrical listening arrangement and check that your screens leave enough room for it. Genelec recommends a 60° angle between the left and right monitors, aimed at the listening position, with similar distances and heights on both sides. Measure your desk and any stands to see whether this arrangement is possible.

Do I always need a separate audio interface for these monitors?

Not always; it depends on the connections on the specific system and your computer. ADAM Audio lists direct USB-C connectivity for the D3V. The Genelec 8010A has an analogue XLR input, while the Yamaha HS5 has analogue XLR and TRS inputs. For these models, check that your audio source has two suitable output channels.

What should I check if I want to use measurement-based calibration?

Check the exact version and the measurement equipment included. IK Multimedia lists an ARC measurement microphone with the pair version of the iLoud Micro Monitor Pro. Position both monitors carefully too, as calibration doesn’t replace the need to consider their physical positions and reflections.

What does the statutory guarantee mean when buying as a consumer in the Netherlands?

Consumer purchases in the Netherlands are covered by a statutory guarantee; any additional commercial guarantee doesn’t replace those rights. Business.gov.nl states that the statutory guarantee always applies and takes precedence over the commercial guarantee.

What safety rules apply to active monitors sold in the Netherlands?

According to Business.gov.nl, electrical or electronic equipment sold in the Netherlands must comply with the applicable European rules. A CE mark is not a quality mark for sound.