Who are studio monitors suitable for?

Percussion editor with a small desk

You want to assess individual hits and stereo placement, but need to fit two monitors close to your listening position.

Home producer dealing with tricky room acoustics

You’ll benefit from a setup tailored to your room and listening position, as walls and reflections can affect what you hear.

Student with housemates

You want to edit percussion without assuming that larger speakers or a subwoofer will automatically suit a shared living space.

What should you look for?

Compact active desktop monitors

Choose these if: you have limited desk space or want a direct USB-C connection to your computer.

Trade-off: don’t judge low-end response by cabinet size or a frequency figure alone; check the measurement tolerance too, and what’s included with the model.

Active nearfield monitors around 5 inches

Choose these if: you can position two speakers symmetrically and have a suitable analogue output.

Trade-off: a front-facing bass port doesn’t guarantee trouble-free placement; also consider how the walls and listening position affect your setup.

Larger nearfield monitors

Choose these if: you have enough space and want to assess the lower notes of kick drums or toms from your listening position.

Trade-off: more bass won’t automatically solve room resonances or potential noise issues for your housemates.

Passive monitors with an amplifier

Choose these if: you want to put together a suitable amplifier and the connections you need.

Trade-off: the amplifier and cables are separate components; unlike an active monitor, a passive one won’t connect directly.

When editing percussion in a student room, your main decisions are linked: you need to position the pair properly, make sure the connections are compatible and decide how much low-end detail you can realistically use in that space.

Consideration What to look for Who is this important for?
Percussion detail and stereo image Check that two monitors will fit symmetrically at ear height and can be angled towards your listening position. I want to assess individual hits and stereo placement without putting monitors beyond the edges of my small desk; around 33% of consumers prioritise percussion detail and stereo image.
Placement and room acoustics Measure the available space and compare port positions and any adjustable placement controls. If walls and my listening position could affect what I hear, I want to set up the monitors evenly and take the acoustics into account. Around 27% of consumers prioritise placement and room acoustics.
Bass and housemates Compare frequency ranges alongside the stated dB tolerance, and consider whether it’s practical to assess low frequencies from your listening position. I want to check kick drums and low toms while being considerate of others at home; around 20% of consumers prioritise this balance between bass monitoring and housemates.
Connections and complete pair Check that the inputs work with your computer or interface, and whether the model includes one speaker or two. I want to know whether I can put together a stereo pair with suitable connections without missing any essential components. Around 20% of consumers focus on connections and what’s included in the pair.

Common buying mistakes

  • Assuming the price of one monitor is for a stereo pair

    The Yamaha HS5 is packaged individually; the version of the PreSonus Eris Studio 5 described here is also a ‘Single’. So one speaker doesn’t automatically mean you’re getting a pair.

    Check how many speakers are included in the specific model, and whether you have the connections and cables you need.

  • Comparing frequency limits without checking measurement tolerance

    For the HS5, Yamaha lists figures including 54 Hz at −10 dB and 74 Hz at −3 dB. ADAM Audio lists 45 Hz at −6 dB for the T5V. These figures use different measurement limits, so they aren’t directly comparable.

    Compare the full frequency specification, including the dB tolerance, and bear the intended setup in mind.

  • Choosing a larger woofer or subwoofer before getting the setup right

    Your listening position, reflections and room resonances all affect what you hear. More bass won’t automatically resolve these acoustic effects or potential noise issues for your housemates.

    First, work out whether you can position two monitors symmetrically and whether you can realistically use the extra low end in that space.

Brands worth comparing

These examples can help you compare models and versions. The features listed apply to the product ranges described and don’t, on their own, indicate availability.

ADAM Audio

The T5V is an active nearfield monitor for a setup around 5 inches, while the D3V is designed for a compact desk.

  • ADAM Audio lists a 5-inch woofer and a rear-facing bass port for the T5V.
  • According to ADAM Audio, the D3V has USB-C, two balanced TRS connections and detachable monitor stands included.
  • The D3V is a different product from the T5V; with the T5V, take its rear-facing port and placement into account.

Yamaha

The HS5 is an active nearfield monitor worth comparing if you’re looking for balanced analogue inputs and placement controls.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL controls.
  • The HS5 is packaged individually. The stated 54 Hz at −10 dB is not the same measurement point as 74 Hz at −3 dB.

PreSonus

The Eris Studio 5 is an active monitor around 5 inches, with a front-facing port and acoustic controls.

  • PreSonus lists Acoustic Space, mid, high and low-cut settings.
  • The version described is a ‘Single’. A front-facing port and EQ controls won’t automatically solve room acoustic problems.

KRK

The ROKIT 5 Generation Five is an active monitor worth comparing if you want to explore different voicing modes and EQ combinations.

  • KRK lists three voicing modes and 25 combinations of boundary and tuning EQ.
  • The version described is a single speaker; these features alone don’t prove that it will reproduce percussion better.

IK Multimedia

The iLoud Micro Monitor Pro is a compact option worth comparing if its features and version suit a small desk.

  • IK Multimedia lists a 3-inch woofer and XLR, RCA and USB-C connections.
  • The measurement microphone is specifically listed with the pair version, so check which version is being offered. Calibration doesn’t necessarily replace addressing room acoustics.

Kali Audio

The LP-6 2nd Wave is a larger active nearfield option worth comparing if you have room to position it.

  • Kali Audio lists a 6.5-inch woofer for the LP-6 2nd Wave.
  • Don’t assume that a model labelled ‘LP6’ without a generation specified is the same version as the LP-6 2nd Wave.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you set up two monitors for stereo editing?

Point both monitors symmetrically towards your listening position. Genelec recommends a 60-degree angle between the monitors from the listening position, with the listener at the point of an equilateral triangle. Also bear reflections from your desk and walls in mind.

Can built-in EQ or calibration fix an untreated room?

Not necessarily. Settings can help you tailor monitors to your setup, but Genelec notes that calibration may not resolve every room acoustic problem.

Do active monitors need a separate amplifier?

No, active monitors have a built-in amplifier. Check that your computer or audio interface output is compatible with the inputs on your chosen model. A passive monitor needs a suitable separate amplifier.

What warranty applies to a consumer purchase in the Netherlands?

Statutory rights apply alongside any commercial warranty. If a product breaks sooner than you could reasonably expect under normal use, the seller must offer an appropriate solution at no cost, according to ACM ConsuWijzer. There is no fixed statutory warranty period that applies equally to every monitor.

What does a CE mark tell you about an active monitor?

A CE mark is not a quality mark for sound. According to Business.gov.nl, the responsible manufacturer must apply the mark when the product meets the applicable technical and administrative requirements. On its own, this doesn’t tell you whether a specific version meets those requirements.