Who are these monitors for?

Editor with limited desk space

Wants to fit two speakers on the desk without giving up a symmetrical listening setup. Genelec describes an equilateral triangle as a starting point for positioning.

Percussion editor who needs to assess detail

Wants to assess attacks and stereo positioning, while bearing in mind that the position of the speakers and reflections from the desk and room affect what they hear.

Editor working on kick-heavy tracks

Wants to take the stated low-frequency response into account, but doesn’t treat a frequency figure as a guarantee that they can fully assess the bass from their listening position.

What should you look for when choosing?

What to consider What to look for Who is this important to?
Stereo positioning Check whether you have room for two monitors; Genelec recommends a symmetrical setup around the listening position. I want to fit two speakers on my small desk without making the listening setup uneven. Consumers who prioritise positioning above all else account for around 33% of consumers considering this choice.
Attacks and stereo Check the positioning options and any settings for desk or wall placement; these don’t prove that reflections will disappear. When working with percussion, I want to assess attacks and stereo positioning without overlooking the effect of my desk and room. Consumers who prioritise this above all else account for around 27% of consumers considering this choice.
Bass monitoring Compare frequency limits only when they use the same measurement basis: Yamaha states 85 Hz at −3 dB for the HS3, while Genelec states 67 Hz at −6 dB for the 8010A. I work on kick-heavy tracks and want to understand what a stated low-frequency limit does and doesn’t tell me about my listening position. Consumers who prioritise bass monitoring above all else account for around 20% of consumers considering this choice.
Connections and what’s included Check that the input suits your source and whether the package contains one monitor or a pair; Genelec lists one 8010A per package, while Yamaha sells the HS3 as a pair. I want to connect my existing source and avoid overlooking the need for a second monitor. Consumers who prioritise connections and what’s included above all else account for around 20% of consumers considering this choice.

Common buying mistakes

  • Comparing low-frequency limits without considering the dB reference

    Yamaha states a low-frequency limit of 85 Hz at −3 dB for the HS3; Genelec lists 67 Hz at −6 dB for the 8010A. These measurements aren’t directly comparable, and on their own they don’t tell you how kick drums will sound in your room.

    Check the measurement basis for each frequency limit and assess the bass in the intended setup, too.

  • Assuming one monitor is a stereo pair

    Genelec lists one 8010A per package, while Yamaha packages the HS3 as a pair.

    Before buying, check what’s included and make sure you have two compatible speakers and the right connections.

  • Assuming room correction will fix every setup

    A calibration feature alone won’t tell you how a monitor will sound on your desk; positioning and reflections also play a part.

    Start with a practical, symmetrical listening setup, then see whether positioning settings or measurement are suitable for your situation.

Relevant brands to consider

ADAM Audio

ADAM Audio describes the D3V as a desktop set with USB-C and balanced TRS connections.

  • ADAM Audio lists positioning switches and detachable stands included in the box.
  • According to ADAM Audio, the internal DSP works via USB at 48 kHz/16-bit. Sound claims aren’t an independent test of percussion performance.

Kali Audio

Kali Audio describes the LP-UNF as a desktop monitor for mixing, with settings for different desk and wall positions.

  • These settings may be useful if the monitors are close to the desktop or back wall.
  • Kali Audio’s claims about clarity and bass response aren’t independent findings that apply to every room.

Yamaha

Yamaha’s Dutch product specifications describe the HS3 and HS4 as compact active monitors sold as pairs.

  • For both models, Yamaha lists ROOM CONTROL and HIGH TRIM, as well as analogue connection options.
  • The stated low-frequency limit for the HS3 is 85 Hz at −3 dB, so don’t judge its suitability by speaker width alone.

Genelec

Genelec sells the compact 8010A individually; each monitor is listed with an analogue XLR input.

  • Genelec lists dimensions including the Iso-Pod and room compensation controls.
  • If you want to set up a stereo pair, check that you have two monitors and compatible connections.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor Pro as a compact monitor with ARC X calibration.

  • According to IK Multimedia, the pair version includes a measurement microphone.
  • Check which pack size is being offered; claims about accuracy and transient response aren’t an independent test of percussion performance.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for stereo editing?

Start with a symmetrical setup and aim both monitors at your listening position. Genelec recommends an equilateral triangle as an ideal starting point. Also bear in mind how your desk and room affect what you hear.

Can I connect a studio monitor directly to my computer?

That depends on the monitor’s inputs and your source’s outputs. ADAM Audio lists USB-C for the D3V; Genelec lists an analogue XLR input for the 8010A. Check which connections your computer or audio interface offers and which cables you’ll need.

How can I check that I’m buying a complete stereo pair?

Check how the specific model is sold. Yamaha lists the HS3 as a pair, while Genelec lists one 8010A per package. Make sure the connections are also suitable for your source.

What rights do I have as a Dutch consumer when buying online?

According to the Netherlands Authority for Consumers and Markets, distance purchases generally come with a 14-day cooling-off period from the day after the product is delivered or the contract is confirmed, subject to legal exceptions. Separately, ACM ConsuWijzer states that if a product doesn’t perform as you could reasonably expect under normal use, the seller must put this right free of charge. This is separate from any manufacturer’s warranty.