Who are these monitors for?

Percussion editor working with two screens

You want to assess detail on the left and right, but your screens take up space and can reflect sound. Genelec recommends placing speakers symmetrically around your listening position; check whether you can do this on your desk.

Editor assessing kick and bass

When making decisions about kick and bass, a stated frequency limit isn’t enough: also check the dB measurement point and the effect of your listening room. ADAM Audio explains that manufacturers may state frequency limits at different measurement points.

Editor short on desk space

You need room for a complete stereo pair and want to know how to connect it to your computer or audio interface. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS inputs; the Genelec 8010A has an XLR input on each speaker.

What should you look for when choosing?

First, check whether you can position both speakers symmetrically with a clear path to your listening position. Then compare the bass specifications and make sure the connections and number of speakers in the box suit your source and the stereo pair you want.

What to consider What should you check? Who should consider this?
Stereo positioning Check whether both speakers can sit at the same height, free from obstructions and aimed at your listening position. When editing left-to-right detail, I want to be able to position both speakers freely and symmetrically despite the screens. Around 33% of consumers rank stereo positioning as their top buying priority.
Kick and bass Only compare frequency figures at the same dB measurement point, and assess the result where you listen. When editing kick and bass, I want to know what the monitors sound like in my listening position, not just what a frequency figure suggests. Around 27% of consumers give bass assessment their top priority.
Desk space Measure the available space on both sides of your screens and check the dimensions and base of each model. With limited desk space, I want to know whether a pair of speakers will fit beside my screens and have room to perform properly. Around 20% of consumers put physical fit first.
Connections and what’s in the box Compare the inputs with the outputs on your computer or interface, and check whether the box contains one speaker or a pair. If I want to use my existing computer or interface, I need to know which outputs I need and how many speakers to buy. Around 20% of consumers give connections and what’s in the box their top priority.

Common buying mistakes

  • Comparing frequency limits without checking the dB measurement point

    A lower limit at −10 dB isn’t directly comparable with one at −3 or −6 dB. Looking only at the frequency figure can therefore give you a misleading impression of bass performance.

    For each exact model, note both the frequency and the dB measurement point, then assess the bass in your own listening position.

  • Mistaking a single monitor for a stereo pair

    Some models, including the Yamaha HS5 and HS7 and the KRK ROKIT 5 Generation Five, are sold individually.

    Before you buy, check how many speakers are included and which connections you’ll need for the left and right channels.

  • Choosing a larger monitor or subwoofer before measuring your setup

    A larger speaker or extra bass output won’t automatically solve reflections from your screens or changes caused by the room.

    First, make sure you can create a clear, symmetrical stereo setup. Then decide whether you need more bass response.

Brands to consider

ADAM Audio

The D3V is a compact desktop set worth considering if two screens leave you short on space.

  • ADAM Audio says the D3V comes as a pair and has USB-C and balanced TRS inputs. The manufacturer specifies 45 Hz at −6 dB.
  • The stated frequency limit doesn’t tell you how the bass will sound in your listening position. Sound On Sound also describes the D3V as designed for desktop use.

Yamaha

The analogue HS5 and HS7 differ in cabinet and woofer size, making them worth comparing for a nearfield setup.

  • Yamaha lists XLR/TRS connections and ROOM CONTROL on both models.
  • The HS5 and HS7 are sold individually. Yamaha gives the HS7 a lower frequency range than the HS5 at the same dB measurement points; also consider the space available and your room.

Genelec

The 8010A is a small active monitor for a workspace with limited room.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, including the Iso-Pod, and an XLR input. Its stated frequency limit is 67 Hz at −6 dB.
  • Compact size and the stated frequency limit are separate considerations when you’re assessing kick and bass.

JBL Professional

The 305P MkII is an analogue 5-inch nearfield monitor to compare if you’re looking for XLR/TRS and adjustable filters.

  • JBL lists Boundary EQ settings and HF Trim for the 305P MkII.
  • Settings can’t replace suitable physical positioning. JBL’s claims about stereo imaging and transient response are manufacturer claims, not independent test conclusions.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor sold individually.

  • KRK lists Mix, Focus and Create modes, along with 25 combinations of boundary and tone settings.
  • Those settings alone don’t prove that your room acoustics will be corrected automatically.

Products at Joybuy

Related products coming soon.

Frequently asked questions

How should you position speakers beside two screens?

Position the left and right speakers as symmetrically as possible, aim them at your listening position and keep the path to your ears clear. Genelec describes an equilateral triangle as the ideal stereo setup. Screens can reflect sound, so also assess your actual arrangement.

Do you need a subwoofer straight away for kick tracks?

Not necessarily: first assess what the stereo pair sounds like in your listening position. If you add a subwoofer, its position and setup matter; Genelec notes that placing it in a corner can increase output, but usually won’t give you the flattest response.

Can you connect a studio monitor directly to your computer?

It depends on the connections on the exact model and the outputs on your computer. According to the manufacturer, the ADAM Audio D3V has USB-C, while the Genelec 8010A has an analogue XLR input. Check whether you can connect your source directly or need an audio interface.

What should you look for in terms of electrical product safety in the Netherlands?

The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical products; the applicable product rules depend on the product. Check the required marking and product information for the specific version: a model name in a comparison doesn’t prove that the item being offered meets the requirements.

What warranty and cancellation rights apply to an online purchase in the Netherlands?

According to the Dutch Government, consumer purchases must be of satisfactory quality, but there is no fixed statutory warranty period in the Netherlands, and the retailer is your point of contact if there’s a problem. For online purchases from a business, a 14-day cooling-off period applies in many cases; terms and exceptions may apply.