Creators with one free mains socket
You’re looking for a stereo pair that doesn’t need two separate mains plugs, so you check how the speakers are powered and connected to each other.
If you only have one free mains socket, start by looking for a stereo pair with one powered main unit, and check that its inputs are compatible with your audio source. When comparing recordings, keep your listening volume consistent and measure the loudness of the files separately: the speakers’ volume control does not measure or normalise them. Separately powered active monitors offer different connection and placement options, but need more mains sockets; passive monitors require a suitable amplifier.
You’re looking for a stereo pair that doesn’t need two separate mains plugs, so you check how the speakers are powered and connected to each other.
You switch between recordings and want to use a consistent listening setting while measuring the loudness of the audio files separately.
You’re considering passive reference monitors and can match them to your amplifier, connections and the monitors’ limited frequency range.
First, count the mains sockets needed for the complete system. Then check the inputs and the space available. Compare recordings at a consistent listening level and measure their loudness separately.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Mains sockets required | Check the power requirements for the exact stereo pair, along with its plug and connecting cable. Remember to include the power needs of your other equipment, too. | If I only have one free socket, I want to know how many sockets the complete pair needs. Around 36% of consumers put the number of sockets required at the top of their list. |
| Level matching | Keep the listening level consistent and use separate audio software to measure the loudness of the recordings. The EBU recommends measuring average programme loudness when normalising audio signals. | When I switch between recordings, I don’t want to mistake a difference in listening volume for a difference in file loudness. Around 29% of consumers put level matching first. |
| Connections and placement | Compare the inputs with your source’s outputs, and allow enough space for both speakers and their cables. | If my desk has limited space or my audio source has specific outputs, I want to know in advance whether they’ll work together. Around 21% of consumers give connections and placement top priority. |
| Bass and additional reference | Check the stated frequency response and how it was measured. Don’t compare limits quoted against different dB references as if they mean the same thing. | If I mainly want to assess bass, the frequency range needs to suit that listening task. Around 14% of consumers start by checking this. |
The volume control changes your listening level, but it doesn’t measure the loudness of the audio file. Changing the volume can therefore affect your judgement.
Compare recordings at a consistent listening level and measure their loudness separately.
If you don’t already have a suitable measurement workflow, you’ll need to set one up alongside your monitor arrangement.
A passive monitor needs an external amplifier, which will also need a power supply.
Factor in all the components, cables and sockets you’ll need before choosing this setup.
If you don’t have a suitable amplifier, you’ll need to get one to use the system.
A frequency limit at −6 dB doesn’t mean the same as a range without a corresponding measurement reference. An unfair comparison could give you the wrong impression of how suitable a monitor is for your listening task.
Check the measurement conditions, and use a limited-bandwidth monitor only for the task it’s designed for.
The 104-BT is a compact desktop reference system with one powered main monitor and a second monitor.
The D3V is designed for compact desktop monitoring, with USB-C and balanced analogue inputs; the T5V is a separate active nearfield monitor.
The 8010A is an active monitor sold individually, with an analogue XLR input.
The Mixcube Passive is a limited-bandwidth reference monitor, designed for use with an existing amplifier setup or one put together specifically for it.
The CR3.5 is a compact active desktop stereo pair with tone control and analogue inputs.
No. Keep your listening setting consistent while comparing recordings and measure the integrated loudness of the audio files separately. EBU R 128 is a recommendation for the programme context described, not a universal target value for every recording.
The passive Avantone Mixcube has no built-in amplifier, but the external amplifier it needs will also require a power supply. So assess the whole system, not just the speaker cabinet.
Check the specified power supply and make sure the mains connection is accessible. In the CR3.5 manual, Mackie warns against overloading sockets and extension leads, and says to keep ventilation openings clear. Follow the manual for other models.
For distance sales, the cooling-off period is usually 14 days, with exceptions depending on the purchase, according to the Dutch government. If a product doesn’t meet what you could reasonably expect under normal use, statutory warranty rights also apply; contact the seller for help.
According to the Netherlands Food and Consumer Product Safety Authority, CE marking is compulsory for electrical consumer products offered for sale in the Netherlands. The specific safety requirements that apply to a particular version depend, among other things, on the product and its rated supply voltage, so check the version on offer.