Who is this buying guide for?

Producer with one spare plug socket

You want to connect a complete stereo pair without needing a separate mains socket for each speaker. Check how the speakers connect to one another and whether the power supply is suitable for the version on offer. ADAM Audio lists the cable and power-cable lengths for the D3V; the LP-UNF product information describes one powered speaker and one passive speaker.

Mixer checking kick and bass

You make decisions about low frequencies in your mixes and want to understand what the stated frequency response means for the sound at your listening position. Manufacturers use different measurement bases, and your room and speaker placement also affect what you hear.

Producer working at a small desk

You need to be able to position two speakers neatly and symmetrically, and choose the right connection for your computer or audio interface. Genelec highlights that the room and the position of the speakers and listener all affect what you hear.

What should you look for?

Stereo set with shared power

Suitable if: you can spare one mains connection for the monitors and have room for two speakers.

Bear in mind: the cable connecting the speakers and the length of the power cables. Check the exact version.

Two separately powered monitors

Suitable if: you have two suitable mains connections and enough space to position them.

Bear in mind: you need two monitors for stereo. Yamaha says the HS5 is packaged individually.

What to consider What should you check? Who should pay particular attention?
Mains connections and safe setup Count the power connections you need, and check the cable route, included power supply and available, undamaged sockets. The Fire Service advises against connecting extension leads and multi-socket adaptors to one another. If I can only free up one safe mains connection, I’ll look for a setup that works with it. Around 28% of consumers prioritise the number of connections.
Checking kick and bass Only compare frequency limits that use the same dB measurement basis. Check decisions about deep bass on a familiar playback system too. When mixing kick and bass, I want to know what the speakers sound like at my listening position. Around 28% of consumers give bass performance top priority.
Positioning and stereo image Measure whether you can position two speakers neatly and symmetrically. Check whether there are settings for your intended desk or wall placement. At a small desk, I need to be able to set up two speakers without losing sight of my listening position. Around 17% of consumers start by considering placement.
Connecting to your equipment Compare the audio outputs on your computer or interface with the inputs on the set, and check which cables you’ll need. If I want to use my existing computer or interface, the connection needs to be compatible. Around 16% of consumers make source compatibility their main concern.
Complete stereo set Check whether the listing includes one speaker or a pair, and which power supply, connecting cables and audio cables are included. I want to know in advance whether I’m buying a complete stereo pair or need to buy a second monitor. Around 11% of consumers mainly look for a complete set.

Common buying pitfalls

  • Using the lowest stated frequency as a ranking of bass performance

    A limit measured at −10 dB isn’t on the same basis as one measured at −6 dB or a range within ±3 dB. Your room and listening position also affect what you hear.

    Check the dB measurement basis and test your bass decisions on a familiar second playback system.

  • Mistaking one active monitor for a complete stereo pair

    Yamaha lists the HS5 as a single speaker, while PreSonus describes the Eris 3.5 2nd Gen as a pair.

    Before buying, check how many speakers are included and which power supply and cables come with them.

  • Solving a shortage of plug sockets by daisy-chaining multi-socket adaptors

    The Fire Service advises checking leads and multi-socket adaptors for damage and not connecting them to one another.

    Plan a safe setup first. If needed, compare a stereo set with a single power supply instead of adding more connected multi-socket adaptors.

Relevant brands to consider

ADAM Audio

The D3V is a compact desktop stereo set with USB-C audio and balanced TRS inputs.

  • ADAM Audio lists a frequency limit of 45 Hz at −6 dB and placement correction for the D3V.
  • The stated frequency limit isn’t a measurement of performance in your room. The speaker cable is 2 m long, so check that it suits your setup.

Kali Audio

The LP-UNF is a desktop stereo set with USB-C, TRS and RCA connection options.

  • Kali Audio gives the LP-UNF a frequency range of 54 Hz to 21 kHz within ±3 dB.
  • The separately listed 39 Hz figure uses a −10 dB measurement basis. These are manufacturer specifications, not a measurement of bass performance in your room.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair with several input options.

  • PreSonus lists TRS, RCA and 3.5 mm stereo inputs, tone controls and an included speaker cable.
  • The stated frequency response starts at 80 Hz. So don’t rely on this pair alone to assess deep bass.

Yamaha

The HS5 is an example of a separately powered active nearfield monitor.

  • Yamaha lists XLR and TRS inputs and adjustment options for the HS5.
  • Yamaha packages the HS5 individually. You’ll need two monitors for stereo; the stated limits are 54 Hz at −10 dB and 74 Hz at −3 dB.

Mackie

The CR3.5 is a compact set for a desk used for both production and general listening.

  • Mackie says the tone control is designed to give a flat response for tracking and mixing when turned fully to the left.
  • Mackie says turning it to the right adds more bass and treble. This is the manufacturer’s guidance, not an independent accuracy measurement.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can I connect two monitors to a multi-socket adaptor?

Check that the connection is suitable for your setup and make sure your leads and multi-socket adaptors are undamaged. The Fire Service advises against connecting multi-socket adaptors to one another; don’t use an extra adaptor as a substitute for checking that your setup is safe.

How should I position two speakers to assess stereo?

Angle both speakers towards your usual listening position and try to place them symmetrically, at a similar height. Genelec points out that reflections and the positions of the speakers and listener all affect what you hear.

Can I connect monitors directly to my computer?

You can if the connections on your chosen set match those on your computer. ADAM Audio lists USB-C audio and analogue TRS inputs for the D3V; PreSonus lists analogue inputs for the Eris 3.5 2nd Gen. Check which output and cable you’ll actually be using.

What are my rights if a pair I’ve bought online isn’t suitable?

For an applicable online consumer purchase from a trader, you generally have 14 days from delivery to change your mind, according to ACM ConsuWijzer. Dutch statutory warranty also applies: if the product doesn’t perform as you could reasonably expect under normal use, the seller must put things right, according to ACM ConsuWijzer. Check who the seller is and which terms apply to your purchase.

What product rules apply to active or Bluetooth monitors in the Netherlands?

Electrical and electronic equipment placed on the market in the Netherlands must meet the applicable safety requirements. The Dutch government explains that CE marking and an EU declaration of conformity apply to products covered by those requirements; equipment with Bluetooth is also subject to the applicable rules for radio equipment. A product listing alone doesn’t confirm that a particular version meets all the applicable requirements.