Narrator who also records
If you’re recording your own narration, it’s best to use headphones while recording and monitor speakers when mixing. Focusrite warns that sound from speakers can leak into the microphone.
To mix and compare project versions, choose a stereo pair that you can position symmetrically around your listening spot and connect to your computer or audio interface. It’s best to use headphones while recording: Focusrite warns that sound from speakers can bleed into the microphone. When comparing versions, keep your listening position and settings the same. Genelec points out that the room and speaker placement also affect what you hear.
If you’re recording your own narration, it’s best to use headphones while recording and monitor speakers when mixing. Focusrite warns that sound from speakers can leak into the microphone.
To compare project versions in a limited workspace, you’ll need a stereo pair that can be positioned symmetrically and connected to your computer or audio interface. Genelec highlights that the speakers’ position in the room also affects what you hear.
If you’re assessing music, effects and bass as well as speech, pay attention to the measurement conditions behind the frequency figures and to your listening room. Genelec describes room acoustics and speaker placement as factors that affect how sound is perceived.
| What to consider | What should you check? | Who is this most important to? |
|---|---|---|
| Comparing speech and versions | Keep your listening position, volume and sound settings the same; check that two speakers will fit symmetrically. | If I’m mainly assessing spoken word and different project versions, I want to keep my listening conditions consistent. Around 33% of consumers say reliably comparing speech and versions is their main buying concern. |
| Desk placement | Measure the space for both speakers and check their distance from the walls and listening position. | With limited desk space, I still want to be able to position both speakers effectively. Around 27% of consumers prioritise fitting speakers into their available workspace. |
| Connections and what’s included | Compare your computer or interface outputs with the inputs on the exact model; check whether the offer includes one speaker or a pair. | If I want to connect my existing equipment and need a stereo pair, I want to know in advance which connections are available and how many speakers are included. Around 20% of consumers name connections and what’s included as their main buying concern. |
| Music, effects and bass | Check frequency figures alongside the stated dB measurement point, and assess the balance from your final listening position. | When my versions also include music and effects, I want to be able to assess the bass as well as the voice. Around 20% of consumers prioritise music, effects and bass. |
A stereo pair needs two speakers, but some offers may be for a single monitor.
Before ordering, check exactly how many speakers are included and which cables come with them. PreSonus describes the Eris 3.5 2nd Gen as a pair.
Frequency limits may be measured at different dB points, while the room and speaker placement also affect the balance you hear.
Compare the measurement point too: ADAM Audio gives 45 Hz at −6 dB for the T5V, while Yamaha lists 54 Hz at −10 dB for the HS5. These measurements aren’t directly comparable.
Walls, your desk and uneven distances can all affect what you hear from your listening position. Adjustment options don’t remove these effects.
First check that you can position both speakers symmetrically, then see which placement settings the manufacturer recommends for the exact model.
Sound from the speakers can find its way back into the recording.
Use headphones while recording, then use your monitor setup to mix and compare the results afterwards.
The Eris 3.5 2nd Gen is a compact active stereo set for a small workspace.
Kali Audio describes the LP-UNF as a stereo set for desktop mixing, with digital and analogue connections.
The HS5 is an active nearfield monitor for a setup with suitable analogue outputs.
The 305P MkII is an active 5-inch monitor for an analogue nearfield setup.
ADAM Audio describes the T5V as an active 5-inch nearfield monitor for smaller control rooms.
It’s best to save them for mixing afterwards. Focusrite warns that sound from speakers can bleed into the microphone during recording, so use headphones to monitor the audio while recording.
Position both speakers symmetrically and angle them towards your listening spot. Genelec describes an equilateral triangle as the ideal arrangement for a stereo pair, though reflections in the room can still affect the sound.
No, active monitors have a built-in power amplifier. Also check which audio output and cables are compatible with the exact model.
Only if they use the same measurement conditions. The ADAM Audio T5V is rated at 45 Hz at −6 dB, while the Yamaha HS5 is rated at 54 Hz at −10 dB; these figures aren’t directly comparable. Placement and room acoustics also affect what you hear.
Active electrical studio monitors offered for sale in the Netherlands must carry the applicable CE marking. The Dutch Government lists CE marking as a requirement for electronic products offered for sale in the EU; check this for the specific product.