Who are these studio monitors for?

Mixer with a small desk

You want to position two monitors symmetrically in a shared home workspace. Genelec recommends placing them symmetrically around the listening position.

String mixer with a fixed listening position

You assess balance and stereo placement from one working position, and want the connections and settings to suit your setup.

Arranger who also assesses the low end

You also make decisions about lower frequencies and want to weigh the stated low-frequency limit against your room’s layout and acoustics.

What should you look for?

First, check that you can position two monitors symmetrically at your listening position. Then compare the frequency specifications, connections and complete setup.

Consideration What should you look for? Who should consider this?
Positioning and room Measure the space available for two cabinets and check their position in relation to your desk and walls. If the monitor has a rear port, also check the positioning instructions. If my desk has limited space, I want to be able to position two monitors symmetrically. Around 36% of consumers say that positioning is their main concern when buying.
Stereo image of strings Check that both monitors can be positioned at the same height and aimed symmetrically towards your listening position. When I assess balance and stereo placement from one seat, I want to hear the left and right channels under similar conditions. Around 29% of consumers prioritise stereo assessment.
Checking low frequencies Compare frequency limits only when they use the same stated dB measurement conditions, and take your listening position into account. When working on arrangements where I also assess lower frequencies, I want to know what a stated low-frequency limit does and doesn’t tell me about my room. Around 21% of consumers name low-end monitoring as their main concern.
Complete setup and connections Check the number of speakers per pack and whether the inputs suit your audio source. With passive monitors, remember that you’ll need an amplifier. If I want to connect a working stereo setup to my own equipment, I need to know what I’ll need in addition to one monitor. Around 14% of consumers make a complete setup and its connections their top priority.

Common buying mistakes

  • Assuming one monitor is a stereo pair

    Some models are sold individually. One monitor is not the same as a pair for stereo mixing.

    Check how many speakers are in the pack before putting a set together.

  • Comparing low-frequency limits without checking the measurement conditions

    A limit at −3 dB isn’t directly comparable with one at −6 or −10 dB. Your room and the monitors’ positioning also affect what you hear from your listening position.

    Check the dB conditions given for the frequency range, and assess the low end from your intended listening position.

  • Treating a passive monitor like an active one

    A passive model needs a suitable external amplifier, so it requires a different setup from an active monitor.

    Check that the amplifier and connections are compatible, and factor any extra equipment into your decision.

  • Assuming room correction will fix every room

    According to Genelec, calibration can’t solve every acoustic problem in a room.

    Start with a symmetrical setup and use the available settings to fine-tune it, rather than as a substitute for suitable positioning.

    A challenging setup may require changes to the positioning or room acoustics.

Brands to compare

Genelec

The compact active 8010A is an option if desk space is a priority; whether it’s suitable depends on the model and your setup.

  • Genelec states that the 8010A measures 195 × 121 × 115 mm with the Iso-Pod and has an analogue XLR input.
  • Genelec gives a low-frequency limit of 67 Hz at −6 dB and states that each pack contains one monitor. That limit alone doesn’t describe how it will sound in your room.

ADAM Audio

The active T5V is a five-inch nearfield monitor for a workspace where you can accommodate the cabinet and rear-firing port.

  • ADAM Audio gives the T5V a frequency limit starting at 45 Hz at −6 dB.
  • The T5V has a rear bass-reflex port, so check its positioning and the space available on your desk.

Yamaha

The active HS5 and HS7 let you compare two models from the same series.

  • Yamaha gives the HS5 and HS7 low-frequency limits of 74 Hz and 55 Hz respectively at −3 dB. Both have ROOM CONTROL, HIGH TRIM, XLR and TRS.
  • Yamaha states that these models are sold individually. Their stated frequency limits won’t predict how they’ll sound at your listening position.

PreSonus

The active Eris Studio 5 is an option if you want to compare a front-firing port and adjustable room correction.

  • PreSonus lists Acoustic Space, mid, high and low-cut settings for the Eris Studio 5.
  • PreSonus sells this model as a ‘Single’, so check how many you’ll need for stereo.

Amphion

The passive One12 gives you the option of putting together your own monitor system with a separate amplifier.

  • Amphion offers the One12 and separate power amplifiers.
  • With this passive setup, you’ll need to check amplifier and connection compatibility. Amphion’s claims about stereo precision are manufacturer claims, not independently proven advantages for mixing strings.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should I position two monitors to assess a string mix?

Position the left and right monitors as symmetrically as possible and aim them towards your listening position. Genelec recommends a 60° angle between the monitors, with the listener at the point of an equilateral triangle. This positioning advice won’t automatically prevent reflections in the room.

Is room correction enough for a challenging home workspace?

Not always. According to Genelec, calibration can’t solve every acoustic problem. Check the positioning and reflections first, then see whether adjustments help.

How can I reduce the risks of long mixing sessions?

Keep the listening volume under control and take breaks. The World Health Organization points out that sound level, listening time and repeated exposure all matter; a speaker’s maximum sound pressure level is not a recommended listening volume.

What are my rights if a monitor I bought online isn’t suitable or develops a fault?

For eligible distance purchases from a business, the Dutch government says you generally have 14 days to change your mind, subject to relevant exceptions and conditions. This is separate from your rights if a product is faulty. The Dutch government says there’s no fixed statutory guarantee period for all products in the Netherlands, and you should contact the seller about a fault.

Can I mix at home without worrying about my neighbours?

Be considerate of your neighbours when playing audio, and follow the rules that apply to your home and local authority. The Dutch government advises discussing noise problems with your neighbours first. Depending on your home, your landlord, residents’ association or local authority may also be involved.