Who are these options for?

Piano mixer with a small desk

You need to be able to position two monitors symmetrically at close listening range. In this case, size and stereo placement matter more than a larger cabinet. Genelec recommends a symmetrical setup and, ideally, a 60° angle between the monitors.

Piano mixer assessing low notes

You want to be able to assess low piano notes and take room resonances into account. Yamaha Corporation of America gives 27.5 Hz as the lowest fundamental note of a standard piano tuned to A=440 Hz.

Home mixer with an existing audio interface

You’re looking for a stereo pair with inputs and placement settings to suit your workspace. Also check whether the package contains one speaker or a pair.

What should you look for when buying?

First, work out how much space you have for two monitors and how you can position them around your listening spot. Then compare the connections and the information provided about low-frequency response.

What to consider What should you check? Who should pay more attention to this?
Positioning on a small desk Measure whether two cabinets will fit symmetrically, and check that connections and any bass ports will remain unobstructed. If I have limited desk space, I want to position two monitors evenly around my listening spot. Around 33% of consumers give compact, symmetrical placement top priority.
Low piano notes Compare frequency ranges along with their dB limits; Yamaha Corporation of America gives 27.5 Hz at A=440 Hz as the lowest fundamental note of a standard piano. When mixing low piano passages, I want to assess what’s happening in the mix without ignoring the effect of the room. Around 27% of consumers prioritise control over the low end.
Stereo image and detail Check that both monitors can be positioned at the same distance and height, and angled towards your listening position. If I want to assess stereo placement and detail, I need a listening setup that treats the left and right channels equally. Around 20% of consumers give spatial mix detail top priority.
Connections and what’s included Compare the inputs on the exact model with the outputs on your audio source; check how many speakers and which accessories are included. I want to connect my interface and know whether I’m buying a complete stereo pair. Around 20% of consumers prioritise connectivity and clarity about what’s included.

Common buying mistakes

  • Assuming a monitor listing means you’re getting a stereo pair

    The package may contain one speaker or two. If you’re buying a single monitor, you’ll need a second one for stereo.

    Before buying, check what’s included in the package and whether your audio source is suitable for the set you’ve chosen.

  • Comparing low-frequency limits without checking the dB reference

    A frequency figure without a measurement limit doesn’t tell you how different models have been specified on a like-for-like basis. Yamaha specifies the HS5 at both 54 Hz at -10 dB and 74 Hz at -3 dB.

    Note the dB limit alongside each figure, and assess the low frequencies where you mix.

  • Thinking a subwoofer will automatically fix unreliable bass

    Genelec points out that placement and room modes affect low-frequency response. A subwoofer also needs to be integrated with the main monitors, including setting the crossover and phase.

    Start by looking at your setup. Only choose a subwoofer if you can position and calibrate it for your listening room.

Brands to consider

Kali Audio

The LP-UNF is a compact option for close listening, while the LP-6 V2 range offers a larger nearfield option.

  • Kali Audio describes the LP-UNF as an ultra-nearfield monitor.
  • The LP-6W V2 is a different model and is sold as a single speaker. Don’t assume that its low-frequency response or what’s included in a stereo pair is the same as the other model.

Yamaha

The HS5 and larger HS models are active nearfields with XLR and TRS connections, plus settings to adjust their response.

  • Yamaha specifies the HS5 at 54 Hz at -10 dB and 74 Hz at -3 dB.
  • The HS5 listing is for one speaker; check what’s included if you want a stereo pair.

ADAM Audio

The T5V is an active 5-inch nearfield monitor with XLR and RCA inputs.

  • ADAM Audio specifies the T5V’s frequency response down to 45 Hz at -6 dB.
  • The bass port is at the rear. Bear this in mind when positioning the monitor; the listing mentioned is for one speaker.

PreSonus

The Eris Studio 5 is a 5.25-inch nearfield monitor with Acoustic Space settings and a front-facing bass port.

  • PreSonus lists Acoustic Space settings of Flat, -2 dB and -4 dB.
  • The listing is for one speaker. A claim that the port improves bass response is not an independent measurement in your home office.

Genelec

The 8030C is a compact active nearfield monitor with an XLR input and response adjustment settings.

  • Genelec specifies the 8030C at 47 Hz at -6 dB and lists switches for room compensation.
  • That specification doesn’t predict the response at your listening position. Also check that XLR is compatible with your audio source.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for a stereo mix?

Place them symmetrically to the left and right, at the same height and angled towards your listening position. Genelec recommends an angle of 60° between the monitors, ideally. Also take reflections and the effect of the room into account.

Should I buy a subwoofer straight away to mix the lowest piano note?

No, not necessarily. Yamaha Corporation of America gives 27.5 Hz at A=440 Hz as the lowest fundamental note of a standard piano. Whether you need a subwoofer for your mix also depends on your recordings and listening room. You’ll need to be able to position and calibrate any subwoofer, including setting its crossover and phase.

What should I check before connecting monitors?

Compare the outputs on your audio source with the inputs on the exact monitor model, and check whether you’ll receive one speaker or a stereo set. Don’t connect an active monitor directly to the speaker output of a power amplifier: Genelec warns that this can damage the input.

What rights do I have in the Netherlands if a product is faulty or I buy online?

When you buy as a consumer, you’re entitled to a product that meets the terms of the agreement. The Dutch government says there’s no fixed statutory guarantee period in the Netherlands, and that the seller is your point of contact if a product is faulty. For online purchases from a business, you’re often entitled to a 14-day cooling-off period. Check the terms that apply to your purchase.

What should I know about CE marking on an electrical monitor?

According to the European Commission, CE marking is only required for products covered by applicable EU rules. CE marking is a declaration by the manufacturer, not a quality certificate issued by a central EU body.