Who is this for?

Lesson creator mixing speech

You want to assess the balance between spoken explanations and local source material as you mix, rather than simply enjoy listening to the recording. Nearfield monitors are designed for listening at close range, but what you hear also depends on their placement and the room. Genelec recommends paying attention to your listening position and monitor placement.

Creator with a small desk

You have limited space for two separate speakers and want a compact stereo system close to your working position. PreSonus describes the Eris 3.5 2nd Gen as a pair, while ADAM Audio describes the D3V as a desktop monitor.

Editor with existing audio sources

You want to connect your computer or audio interface without discovering later that the connections aren’t compatible. The models mentioned have various connections, including USB-C, TRS, XLR, RCA and 3.5 mm stereo.

What should you look for?

Compact stereo pair for your desk

A good fit if: you work close to a small desk and want a compact stereo setup.

Bear in mind: check the connections on the specific version and make sure the pair is compatible with your source device.

Two separate nearfield monitors

A good fit if: you can place the monitors symmetrically around a fixed listening position and have compatible line outputs.

Bear in mind: allow for the space and cables you’ll need, and remember that some models are sold individually.

Nearfield monitor with extra adjustment options

A good fit if: you specifically want to use room tuning and can assess the placement carefully.

Bear in mind: adjustment options are no substitute for a suitable listening position; their added value for a lesson track that’s mainly spoken hasn’t been established.

What to consider What should you check? Who is this important for?
Speech and source material Listen from your intended mixing position and check the mix on other playback equipment too; a specification alone can’t tell you how it will sound in your room. If you want to balance spoken explanations against local source material, you’ll want to know what you hear from your own listening position. Around 36% of consumers put this balance first.
Placement on a small desk Measure the available space and check whether both monitors can be aimed symmetrically towards your listening position. If you’re buying separate monitors, allow for the space taken up by two cabinets. If you have limited space at your workstation, you’ll want a setup that suits your desk and listening position. Around 29% of consumers prioritise their working space.
Connecting audio sources Make a note of the outputs on your computer, mixer or audio interface and compare them with the inputs on the exact monitor model. Also check whether you’ll need a cable or interface. If you need to connect an existing computer or audio interface, you’ll want to know in advance whether the connection will work. Around 21% of consumers start by checking connection compatibility.
Complete stereo pair Check whether the version is sold as a pair or individually, and whether you need two monitors for stereo. If you’re looking for a complete stereo set, you won’t want to compare a single monitor with a pair. Around 14% of consumers focus on how many units they need to buy.

Common pitfalls

  • Comparing a monitor sold individually with a stereo pair

    A version sold individually won’t include two monitors for stereo; other versions are described as a pair.

    Check what’s included and compare sets with sets, and individual monitors with the number of units you need.

  • Assuming a larger model or room EQ will fix every room

    Placement, reflections and room acoustics also affect what you hear from your listening position.

    First, decide on your listening position and check the space available. Then see whether extra adjustment options suit your setup.

  • Assuming every active monitor connects directly to every computer

    Active monitors can have different inputs. For example, ADAM Audio lists USB-C and TRS for the D3V, while Yamaha lists XLR and TRS inputs for the HS5.

    Note down the outputs on your source device and compare them with the inputs on the exact monitor version.

Brands to consider

PreSonus

The Eris 3.5 2nd Gen is a compact option described as a stereo pair.

  • PreSonus lists TRS, RCA and 3.5 mm stereo inputs for this model.
  • The stated frequency range starts at 80 Hz; that specification alone doesn’t show how clear speech will sound in your room.

ADAM Audio

The D3V is a desktop option, while the T7V and A7V are separate nearfield models.

  • ADAM Audio lists USB-C and TRS for the D3V. For the A7V, the manufacturer describes adjustable voicing and room EQ.
  • Features of the T7V or A7V don’t automatically apply to the D3V; check the connections and features of each model.

Yamaha

The HS5 is a separate active nearfield monitor for use with a source that has compatible outputs.

  • Yamaha lists XLR and TRS inputs, along with Room Control and High Trim controls.
  • The HS5 is sold individually in the Dutch product description consulted; check the version and what’s included.

Kali Audio

The LP-6 V2 is an individual monitor for anyone looking for several analogue connection options.

  • The Dutch product description lists RCA, TRS and XLR inputs.
  • The LP-6 V2 is sold individually there; check how many monitors you need for your setup.

Genelec

The 8030C is a compact nearfield monitor with room-compensation settings.

  • Genelec lists room-compensation switches for the 8030C.
  • The described package contains one monitor. For the 8030CP, check the exact version and colour.

Devine

The MR-5A is described as a set of two active monitors with analogue line inputs.

  • The product description lists TRS and XLR connections for the set.
  • Check that these connections are compatible with the outputs on your computer or audio interface.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors to assess a mix?

Start with a symmetrical setup and point both monitors towards your listening position. For stereo, Genelec recommends a 60-degree angle, with the listener at the point of an equilateral triangle. Then assess how walls and desk surfaces affect the sound.

Can you connect a computer directly to any active studio monitor?

No, it depends on the connections available on your computer and the monitor. ADAM Audio lists a USB-C input for the D3V; according to Yamaha, the HS5 has XLR and TRS audio inputs. Before buying, check the outputs on your own device and what connection you’ll need.

What can you do if a monitor develops a fault too soon during normal use?

Contact the seller. ACM ConsuWijzer explains that your statutory rights apply alongside any seller’s or manufacturer’s warranty. If a product breaks sooner than you could reasonably expect with normal use, the seller must offer an appropriate solution at no cost.

Can you use copyrighted music or other local source material in a published lesson track?

Not automatically. According to the Dutch Government, you need the creator’s permission to use copyrighted work. You can’t simply distribute or publish a copy made for personal use, so check the rights for the specific source material before sharing the track.

Do you have a cooling-off period for a studio monitor bought online in the Netherlands?

For a standard online purchase, consumers generally have a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer also outlines some exceptions, so check which terms apply to your specific purchase.