Who is this buying guide for?

Mixing at modest volume

You want to check a mix repeatedly without playing it loudly in a quiet study. Compare monitors at your usual volume and from your listening position; maximum sound pressure doesn’t tell you how useful they’ll be for this purpose.

Mixing with limited desk space

You need to fit two speakers around your workspace and want to know whether a compact stereo system or small separate monitors will fit the space available.

Checking bass in your mix

You want to know whether the monitors and room give you enough information to assess the low end of your mix. Compare frequency specifications with their measurement basis, and take your listening position into account.

What should you look for when buying?

Compact active desktop system

A good fit if: larger cabinets won’t fit comfortably beside your workspace, or you want to play audio directly from a computer. According to the manufacturer, the ADAM Audio D3V is a pair with USB-C and balanced TRS inputs; the Kali Audio LP-UNF offers USB-C, RCA and TRS.

Keep in mind: check the connection method and positioning. A compact cabinet or stated frequency limit doesn’t guarantee reliable bass assessment from your listening position.

Two separate active nearfields

A good fit if: you have space to position one monitor on each side, at equal distances from your listening position, and have a suitable analogue source. The Yamaha HS5 and ADAM Audio T5V are models you can compare for connections and placement.

Keep in mind: check whether the sale is for one speaker or a pair. The T5V has a rear bass reflex port, which affects where you can place it.

Very compact separate monitors

A good fit if: you want separate speakers but have very little width available. According to Genelec, the Genelec 8010A is 121 mm wide.

Keep in mind: the 8010A is sold individually, so you’ll need two for stereo. Its stated lower limit of 67 Hz at −6 dB doesn’t prove that you’ll be able to assess the deepest bass.

What to consider What to check before buying Who is this important for?
Checking a mix at modest volume Compare at the same usable volume and from your intended listening position; don’t infer low-volume performance from power or maximum sound pressure. If I mix at my usual, quiet volume, I want to be able to assess what I’m hearing repeatedly without playing it loudly in the room. For around 33% of consumers, checking a mix quietly is the main priority.
Placement and room Measure the space for both speakers and check whether a symmetrical setup is possible; settings for desk or wall placement are intended for the actual setup. If my desk has limited space, I want to be able to fit two speakers and position them as evenly as possible in relation to my listening position. For around 33% of consumers, ease of placement comes first.
Connections and buying a stereo pair Check your source’s outputs, the cables you’ll need and how many speakers are included in the specific sale. If I want to play audio from my computer or an analogue source, I want to know in advance which connections I’ll need and whether I’m buying a complete stereo system. For around 17% of consumers, connection options are the main concern.
Assessing the low end Only compare frequency limits that use the same dB measurement basis; also take your room and listening position into account. If bass decisions are important in my mix, I want to know what the stated low-frequency limit does and doesn’t tell me about my listening position. For around 17% of consumers, assessing the low end is the main priority.

Common buying mistakes

  • Mistaking one active monitor for a stereo pair

    Yamaha lists the HS5 and Genelec lists the 8010A individually. One monitor, then, isn’t automatically a complete pair for checking a stereo mix.

    Check how many speakers and which connections are included in the specific sale.

  • Comparing lower frequency limits with different dB bases directly

    Yamaha lists the HS5 at 54 Hz at −10 dB, while Genelec lists the 8010A at 67 Hz at −6 dB. These figures use different measurement limits.

    Note the dB basis for each frequency specification, and consider your listening position when making decisions about bass response.

  • Assuming a placement switch will solve room problems

    Walls, your desk and an uneven setup can affect what you hear, even if a monitor has adjustment options.

    First plan the most symmetrical setup possible, then use the available settings to tailor it.

Brands to consider

ADAM Audio

ADAM Audio offers the D3V as an active desktop system and the T5V as a separate active nearfield monitor.

  • According to ADAM Audio, the D3V has USB-C and balanced TRS inputs. The manufacturer says the T5V has a 5-inch woofer and a rear bass reflex port.
  • These specifications don’t prove how the monitors perform at low volume or in a particular room.

Kali Audio

According to Kali Audio, the LP-UNF is designed for desktop monitoring and has settings for different placement positions.

  • The manufacturer lists USB-C, RCA and balanced TRS inputs.
  • Kali Audio’s claim that mixes translate well to other systems is a manufacturer claim, not a proven result in your home studio.

Genelec

The 8010A is a compact active monitor, sold individually, for situations where space is limited.

  • According to Genelec, the monitor is 121 mm wide and has an analogue XLR input and room compensation switches.
  • Its stated lower limit is 67 Hz at −6 dB; bear this in mind when making decisions about the deepest bass.

Yamaha

The HS5 is a separate active 5-inch nearfield monitor with analogue XLR and TRS inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM controls for adjustment.
  • Its stated lower limit is 54 Hz at −10 dB. Don’t compare this directly with frequency specifications at −6 dB.

KRK

According to KRK, the ROKIT 5 Generation Five is a separate active 5-inch monitor with adjustable voicings.

  • KRK lists Mix, Focus and Create modes, as well as combinations of boundary and EQ settings.
  • The available features aren’t an independently proven benefit in every listening room.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for checking a stereo mix?

Where possible, position them symmetrically in relation to your listening position and angle them towards it. Genelec recommends a 60° angle between monitors for music production, ideally with the listener at the point of an equilateral triangle. Adapt the setup to what’s practical in your room.

Do I always need an audio interface to play audio from a computer?

No, not with every system: ADAM Audio says the D3V can connect directly to a computer via USB-C. With separate analogue monitors, check that your source has suitable outputs.

How can I be considerate of others when checking a mix at home?

A monitor that can play loudly doesn’t have to be turned up. If there’s a risk of disturbing your neighbours, the Dutch government recommends agreeing suitable times for playing music as a first step.

What if a monitor breaks down too soon during normal use?

When you buy as a consumer, the product must meet the expectations you were entitled to have. ACM ConsuWijzer says the seller must offer an appropriate free remedy if the product breaks down too soon during normal use; in the Netherlands, there isn’t simply a fixed legal two-year period for this.

Which product rules are relevant when buying in the Netherlands?

CE marking is required where the applicable harmonised EU rules prescribe it for the product in question. According to the European Commission, the marking isn’t a centrally issued certificate; check the product identity and relevant conformity information, and don’t treat a logo on its own as proof.