If you speak live with an open microphone, it’s best to listen through headphones; the microphone may pick up sound from speakers. Studio monitors can be suitable for checking audio when your microphone is muted, provided the connections and available desk space work for your setup. A headphone output on a speaker won’t automatically configure your audio sources and monitoring in OBS correctly.
Who are studio monitors suitable for?
Streamer using an open microphone
Wants to follow the livestream without the sound from the speakers being picked up by the microphone again. OBS Project explains that selecting the same audio device twice can cause echo, so check both the headphone output and your source and monitoring settings.
Streamer with a dedicated audio interface
Wants to connect monitors to the outputs already available. You may need to choose between USB-C, analogue stereo inputs or two separate balanced connections, so check the exact inputs on the model.
Streamer with a small desk
Wants to place two speakers around the screen and needs to consider their dimensions, listening position and what’s included in the box. Two separate monitors also need space and connections for both channels.
What should you look for when choosing?
Start by checking how you’ll listen while speaking, then look at the connections, how the monitors will fit on your desk and exactly what’s included in the box. This helps you avoid buying a speaker that doesn’t work with your streaming setup.
| What to consider |
What should you look for? |
Who is this important for? |
| Listening without echo |
Check the headphone output and make a test recording to see which sources are sent to the stream and which go to your monitoring. |
If I’m speaking with an open microphone, I don’t want to accidentally send the sound I’m listening to into the recording. Around 36% of consumers prioritise monitoring without echo. |
| Connecting to your equipment |
Compare the outputs on your computer or interface with the inputs on the exact model. Look for USB-C, analogue stereo or separate XLR or TRS inputs. |
If you want to connect monitors to existing equipment, first check which outputs are available. Around 29% of consumers give connecting to their audio chain top priority. |
| Fitting them on a small desk |
Measure the available space, allowing for cables, and check whether you can angle the left and right monitors towards your listening position. |
If I have limited desk space, I want to know in advance whether two monitors will fit beside my screen and can be angled towards my listening position. Around 21% of consumers prioritise desk placement. |
| A complete stereo pair |
Check whether the offer includes one monitor or a pair, and which connecting and audio cables are included. |
If you want to set up stereo straight away, check whether two speakers are included and what else you’ll need. Around 14% of consumers give buying a complete stereo setup top priority. |
Common buying mistakes
-
Assuming a headphone output automatically prevents echo
The connection won’t automatically determine which audio sources OBS records or sends to your monitoring. A wrongly configured or duplicated audio route can still cause echo.
Check your selected audio sources and monitoring device, and make a test recording before you go live.
-
Comparing a single monitor with a stereo pair
The Genelec 8010A is listed individually, while Yamaha specifies the HS3 as a pair. What’s included in the box therefore varies by model.
Check how many speakers and which cables are included with the offer.
-
Assuming a compact monitor will be quiet
The models listed don’t have comparable measurements of audible self-noise at the listening position. Compact dimensions alone don’t tell you how quiet a monitor will sound in your room.
If you’re sensitive to hiss, ask for a demonstration or assess the device in similarly quiet conditions.
Brands to compare
ADAM Audio
The D3V is a compact active stereo set for your desk, with USB-C and analogue TRS inputs.
- ADAM Audio specifies two speakers and a headphone output.
- Check which digital or analogue connection suits your source; these specifications don’t tell you how audible the self-noise will be in a quiet room.
Yamaha
The HS3 is a compact active stereo set with several analogue inputs.
- Yamaha specifies a pair per box, a headphone output and ROOM CONTROL/HIGH TRIM.
- The stated connections are analogue, so check that they suit your source and note the power supply voltage shown on the product.
PreSonus
The Eris 3.5 (2nd Gen) is an active set with analogue inputs and a headphone output on the front.
- PreSonus specifies TRS, RCA and stereo mini-jack inputs, along with high- and low-frequency controls.
- The features listed apply to the second generation; they don’t prove that it has a USB audio input or inaudible self-noise.
Genelec
The compact 8010A is a single active monitor for a setup with two compatible XLR outputs.
- Genelec specifies room compensation and compact cabinet dimensions.
- One monitor per box and one analogue XLR input per monitor: you’ll need two units and suitable outputs for stereo.
JBL Professional
The 305P MkII is a single active 5-inch monitor with balanced connections.
- JBL specifies XLR and TRS inputs, Boundary EQ and HF Trim.
- Check that you have room for two monitors and two suitable outputs. The manufacturer’s performance claims aren’t an independent measurement in your room.
Studio monitors at Joybuy
Related products coming soon.
Frequently asked questions
Can I use speakers while my microphone is on?
That depends on your microphone, playback volume and audio routing. Make a test recording; if sound from the speakers ends up in the recording, use headphones while speaking. OBS Project also warns that capturing the same audio source twice can cause echo.
How should I set up two monitors on my desk?
Angle both monitors towards your listening position and try to place them symmetrically on the left and right. Genelec recommends a 60-degree angle between the monitors for a stereo listening position; this is placement advice, not a guarantee that every room will sound the same.
What should I check when connecting and maintaining them?
Compare the outputs on your computer or interface with the inputs on the exact model, check what’s included in the box and follow the model-specific instructions. Yamaha says to follow the power supply voltage shown on the back of the HS3.
What are my rights when buying online in the Netherlands?
Many distance purchases come with a 14-day cooling-off period, although exceptions apply. The Dutch government states that the Netherlands has no fixed statutory warranty period; if a product is faulty, the appropriate solution depends on the circumstances.
What rules apply to electrical monitors sold in the Netherlands?
According to Business.gov.nl, sellers of electrical and electronic equipment who sell or trade in the Netherlands must ensure that their products comply with the applicable European rules.