If you only have one free plug socket, look for a compact stereo set with a single power supply and a cable connecting the speakers. Be sure to check what’s included and the cable length for the exact model. If your microphone is live while you stream, headphones are usually the more practical monitoring option, as they help prevent speaker sound from feeding back into the microphone. Then choose a connection that suits your computer or audio interface, and avoid monitoring the same signal both directly and through software.
Who is this relevant for?
Streamers with one free plug socket
If you want stereo sound without needing two separate monitor plugs, look for sets that specify how the power supply and speaker connection work. ADAM Audio describes the cables for the D3V; IK Multimedia lists one power supply and a connecting cable for the iLoud Micro Monitor.
Streamers with a live microphone
If you listen through speakers while speaking, the sound being played can feed back into the microphone. Logitech Support recommends headphones as an alternative to reduce echo.
Streamers with an audio interface
If you’re connecting monitors to an existing interface, make sure the outputs match the monitoring setup you choose. Focusrite explains how to connect monitors to the left and right outputs, and warns that using direct and software monitoring at the same time can make you hear the signal twice.
What should you look for when buying?
Compact stereo set with one power supply
A good fit if: you have one plug socket for your monitors and want to listen in stereo at close range.
Bear in mind: check which cables are included and whether the connecting cable is long enough for your desk.
Two monitors with separate power supplies
A good fit if: you have two suitable plug sockets and compatible outputs on your audio interface.
Bear in mind: check whether the model includes one speaker or a pair, and plan the power and signal cables for both monitors.
Headphones for live monitoring
A good fit if: your microphone is live and could pick up the sound from your speakers.
Bear in mind: headphones won’t automatically prevent you from hearing the signal twice if direct and software monitoring are both active.
| What to consider |
What to look for |
Who is this important for? |
| Plug sockets required |
Count the mains plugs for the exact model and check which power supplies and cables are included. ADAM Audio Support lists a 2-metre speaker connecting cable for the D3V. |
If I only have one free plug socket, I want to know in advance whether I can still connect a stereo pair. Around 33% of consumers say the number of mains connections required is their top priority. |
| Sound picked up by a live microphone |
Decide whether you need headphones while speaking, and check how the headphone output and streaming software work. |
When I leave my microphone live while streaming, I want to prevent speaker sound from feeding back into the broadcast. Around 27% of consumers prioritise preventing their microphone from picking up speaker sound. |
| Signal and monitoring setup |
Check that the inputs suit your computer or interface, then choose direct or software monitoring without accidentally hearing the same signal twice. |
If I want to keep using my existing interface, I need connections and a monitoring setup that work with it. Around 20% of consumers put compatibility first. |
| Desk placement |
Measure your available space and check the connecting cable length and any settings for desk or wall placement. |
On a small desk, I want to position both speakers around my listening spot without cables limiting where they can go. Around 20% of consumers give physical placement the greatest weight. |
Common buying mistakes
-
Assuming a stereo pair needs two plug sockets
A set with one power supply and a cable connecting the speakers is a different setup from two active monitors with separate power supplies.
Count the mains plugs for the exact model and check which connecting cable is included before you order.
-
Mistaking a monitor sold individually for a complete stereo pair
A product sold individually won’t automatically give you two speakers for stereo sound.
Check whether the model is sold individually or as a set, and work out how many speakers you need for your setup.
A stereo pair may require a second speaker, as well as extra signal and power cables.
-
Using Bluetooth or dual monitoring without testing your stream
IK Multimedia lists different system latencies for analogue and Bluetooth playback under its stated test conditions; these figures don’t describe the entire livestream chain. Focusrite also warns that direct and software monitoring used together can make you hear the same signal twice.
Test your complete streaming setup and check which monitoring route is active. For the direct monitoring setup described by Focusrite, switch off software monitoring if it would otherwise play the same signal again.
Brands to compare for this setup
ADAM Audio
The D3V is a compact desktop stereo set with USB-C and analogue TRS inputs; the T5V is a single active nearfield monitor. They are different setups.
- ADAM Audio specifies one power supply and a separate speaker connecting cable for the D3V.
- With individual T5V monitors, you’ll need to plan power and cabling for each speaker.
PreSonus
The Eris 3.5 2nd Gen is sold as a compact pair for uses including video and home studio work.
- PreSonus lists TRS, RCA and 3.5mm inputs, a front-facing headphone output and an included speaker cable.
- Check how many mains connections the model on offer requires.
IK Multimedia
The iLoud Micro Monitor is a compact stereo set supplied with a power supply and a cable connecting the speakers.
- The manufacturer lists wired analogue inputs and Bluetooth.
- The stated latency depends on the connection and test conditions; it doesn’t describe the entire livestream setup.
Mackie
The CR3.5 is a compact set for desk use, with analogue inputs and a headphone output.
- The headphone output lets you listen without sound playing through the speakers.
- According to Mackie, the speaker sound is muted when you connect headphones. Also check the tone controls when assessing your stream audio.
Kali Audio
Kali Audio describes the LP-UNF as a stereo system for close-range listening at a desk, with USB-C and analogue inputs.
- The manufacturer describes settings for different desk and wall positions.
- For the Dutch listing, check the power supply, plug and box contents separately.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I monitor through speakers while speaking?
You can if your setup prevents the playback sound from feeding back into your live microphone. If that isn’t possible, headphones are generally a more suitable way to listen and help reduce echo. Test them with your own streaming settings.
Why can I hear my voice twice?
You may hear the same signal twice if direct and software monitoring are both active. Focusrite describes this for the Scarlett and Saffire setups mentioned; check which route your equipment and software are using, and switch off the unintended second route.
Can I use an extension lead if I don’t have enough plug sockets?
Check the power rating and instructions for your equipment, and connect everything carefully. The Dutch Fire Service advises fully unwinding a cable reel before use and allowing electrical appliances enough space to release heat.
Which Dutch product and consumer rules are relevant?
Electrical appliances placed on the Dutch market must comply with the applicable product safety rules. Ondernemersplein explains CE marking and the EU Declaration of Conformity; appliances with Bluetooth may also be subject to radio equipment rules. When you buy as a consumer, you’re entitled to a product that meets expectations, although the Netherlands has no fixed statutory warranty period. The Government of the Netherlands states that online purchases from a business come with a 14-day cooling-off period in many cases, subject to exceptions.