Who are these monitors for?

Demo editor with one spare socket

You edit vocals and instruments at a dedicated workstation and want a stereo pair that needs few mains connections. Remember to check the cable connection between the speakers too.

Songwriter playing audio from a computer

You want to listen to your demo from your computer and are comparing USB-C playback with analogue connections. Treat playback and the inputs you need for recording as separate requirements.

Mixer working at a small desk

You want to assess vocals and stereo balance, but first need to check whether both speakers can sit neatly and symmetrically beside your screen. Genelec recommends pointing monitors towards the listening position.

What should you consider?

Consideration What should you check? Who should give this more weight?
Mains connections Check how many speakers need mains power and whether the cable between the cabinets suits your setup. Yamaha specifies a 2.5 m speaker cable for the HS3. If I can free up only one socket for the speakers, I want to know whether one primary speaker can connect to the other. Around 33% of consumers prioritise the number of mains connections needed for the pair.
Assessing your demo Check the listening modes and tone controls on the exact model. A stated frequency range alone cannot predict what you will hear in your room. When editing, I want to assess vocals, instruments and stereo balance without a listening mode deliberately changing the sound. Around 27% of consumers prioritise this when assessing a demo.
Desk placement Measure to make sure both cabinets fit and can be angled towards you from a similar distance and height. Leave room for the cables too. If my desk has limited space, I first need to make sure both speakers can be positioned properly at my listening spot. Around 20% of consumers consider the placement of two speakers their main concern.
Connecting to your audio source Compare the set’s inputs with the outputs on your computer or interface, and check which audio cables are included. USB-C playback does not automatically replace recording equipment. If I want to use my existing computer or interface, the playback connection needs to be compatible. Around 20% of consumers prioritise this connection.

Common buying mistakes

  • Assuming an extra extension lead is the obvious solution

    According to Brandweer Nederland, daisy-chaining or overloading extension leads can create a fire risk.

    Count the mains connections needed for your entire workstation and plan a safe power setup before choosing a speaker set.

  • Assuming a passive speaker means the set needs no power

    The Edifier MR4 has one active speaker and one passive speaker. The iLoud Micro Monitor uses a model-specific four-pin cable to connect its active and passive speakers.

    Check which speaker needs mains power and what cable connects the second speaker for the exact model you’re considering.

  • Treating a frequency limit as a prediction of how the speakers will sound on your desk

    Yamaha’s frequency specification for the HS3 is stated at −10 dB. Genelec also notes that the room and speaker placement affect what you hear.

    Compare frequency specifications only when they use the same measurement basis, and make sure you have room for suitable stereo placement first.

  • Assuming every offer includes a complete stereo pair

    Yamaha specifies the HS3 as a pair and lists a speaker cable as included, but this does not automatically apply to every offer.

    Check the number of speakers, the cables included and the audio connections required. If a second speaker or suitable cable is missing, you may need to buy it separately.

Brands worth considering

Yamaha

The HS3 and HS4 are worth considering if you want a compact pair with one amplifier for both speakers and several analogue inputs.

  • Yamaha specifies the HS3 as a pair and includes a 2.5 m speaker cable. The manufacturer states a frequency range of 70 Hz–22 kHz at −10 dB; this is not an independent measurement at your listening position.
  • Check that the cable reaches where you want to position the speakers and that the inputs suit your computer or interface.

ADAM Audio

The D3V is worth considering if you want to play audio directly from a computer via USB-C.

  • ADAM Audio lists USB-C and balanced TRS inputs for the D3V.
  • USB-C playback does not mean the set has recording inputs or works without mains power. Consider those requirements separately.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair for songwriters with an existing audio source.

  • PreSonus lists TRS, RCA and stereo mini-jack inputs, a headphone output and an included speaker cable.
  • The stated 80 Hz–20 kHz range is a manufacturer’s specification, not an independent assessment of how the speakers sound in your room.

Edifier

The MR4 is worth considering if you’re looking at a desktop set with one active and one passive speaker, analogue inputs and separate listening modes.

  • Edifier lists TRS and RCA/AUX connections, as well as Monitor and Music modes.
  • Edifier gives different depth measurements for the active and passive cabinets. Measure the space for both speakers and check which cables are included with the set you choose.

IK Multimedia

The original iLoud Micro Monitor is worth considering if you have a small workspace and are looking at an active speaker connected to a second, passive speaker.

  • IK Multimedia describes a model-specific four-pin cable connecting the active and passive speakers.
  • Check which cable and power supply are included with the exact set. Don’t assume features of this model also apply to other iLoud models.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Can you connect two monitors if you have only one spare socket for the speakers?

Yes, if you choose a set where one mains-powered primary speaker powers the second through a speaker connection. The Yamaha HS3 is designed this way; check the cable, plug and box contents for the version you choose. Your computer and any interface may also need power.

How should you position the speakers to assess your demo?

Point both speakers towards your usual listening position and try to place them at a similar distance and height on the left and right. Genelec recommends a 60° angle between stereo monitors when viewed from the listening position. Your room and speaker placement also affect what you hear.

Can a USB-C monitor set replace your audio interface?

For playback from a compatible computer, the ADAM Audio D3V can work without an additional audio interface, according to ADAM Audio. If you also record vocals or instruments, check separately which recording inputs you need.

What warranty and cancellation period apply to online purchases in the Netherlands?

According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; however, you are entitled to a product that works properly and can contact the seller if there is a fault. For online purchases from a business, you generally have a 14-day cooling-off period. Check the terms that apply to your specific purchase.

How can you avoid choosing a monitor that won’t connect to your computer or interface?

Compare the outputs on your computer or interface with the inputs on the exact monitor set, and check which cables are included. USB-C audio is a playback option on the ADAM Audio D3V, while Yamaha lists combination XLR/TRS, RCA and stereo mini-jack inputs for the HS3.