Mixer with one spare socket
You mix string arrangements at a workstation where the power setup of a stereo pair is the first thing you need to consider. ADAM Audio and Yamaha describe the power setups for their compact monitor systems.
When you have few spare sockets, a stereo pair with a shared power setup is a sensible option to compare. Check how many mains plugs each version needs and which speaker cable is required. Then choose based on symmetrical positioning and suitable audio inputs; frequency limits measured at different dB points are not directly comparable. If you’re buying in the Netherlands, also check that the version on offer has CE marking, as required by the Dutch Government for electrical equipment covered by the relevant EU rules.
You mix string arrangements at a workstation where the power setup of a stereo pair is the first thing you need to consider. ADAM Audio and Yamaha describe the power setups for their compact monitor systems.
You need to be able to position two speakers symmetrically around your listening position to assess panning and balance. Genelec describes how to position monitors around the listening area.
You’re looking for wired inputs that work with the stereo outputs and cables on your current equipment. ADAM Audio and PreSonus describe the connection options for their models.
Start with the power setup if you have few spare sockets, but also consider the space on your desk and the outputs on your audio equipment.
Suitable when: having just one available power connection is important and you can connect the two monitors with a cable.
Trade-off: you’ll still need a connection between the speakers, so check the cable and the distance between their positions.
Suitable when: your existing audio interface has compatible analogue outputs and you can match them to the pair’s inputs.
Trade-off: analogue connections alone don’t tell you how many mains sockets the version on offer requires.
Suitable when: you have enough compatible power connections and space to position a pair symmetrically.
Trade-off: check whether you’re buying a pair or a single speaker, and how many mains sockets are needed for each model.
| Point to consider | What should you check? | Who is this important for? |
|---|---|---|
| Number of mains connections required | Check the number of mains plugs, the power supply and the included speaker cable for the exact version. Don’t infer the number of plugs from the word ‘active’. | If you have only one spare socket, you’ll want to know whether the power setup suits your workspace. Around 36% of consumers put the number of connections first. |
| Symmetrical stereo setup | Measure the available space on the left and right, and check that the connecting cable is long enough. Remember to allow for the depth of your desk. | If a screen or other equipment pushes one monitor out of position, it’s harder to achieve a balanced setup. Around 29% of consumers put positioning first. |
| Connection to your audio source | List the outputs on your computer or interface and compare them with the inputs on the exact version. Check which cables you’ll need, too. | If you want to keep using your existing interface, you’ll want to avoid choosing connections that don’t match its outputs. Around 21% of consumers put compatible audio connections first. |
| What’s included and checking the low end | Check whether it’s a stereo pair and whether the required connecting cable is included. Only compare frequency limits when they use the same measurement definition. | When mixing strings, you’ll want to know whether the set is complete and how you can check the low end on other systems too. Around 14% of consumers put what’s included and low-end monitoring first. |
Power setups vary between systems. Yamaha says the HS3 uses one amplifier for both speakers; the ADAM Audio manual shows the D3V’s power supply connecting to the left speaker.
Before choosing, check how many mains cables are needed and how the second speaker connects.
Yamaha gives the HS3 a lower limit of 85 Hz at −3 dB; ADAM Audio lists 45 Hz at −6 dB for the D3V. These measurement points aren’t directly comparable.
Only compare figures based on the same measurement method, and check the low end on another trusted playback system too.
Even with a power setup that could save sockets, you still need to be able to position and connect both speakers correctly.
Check whether you’re buying a pair, which speaker cable is included and whether it’s long enough. If the supplied cable isn’t long enough, you may need an extra one.
The D3V is a compact desktop system worth considering if USB-C audio or balanced TRS inputs are important to you.
The HS3 is a compact wired pair with analogue inputs and one amplifier for both speakers.
The Eris 3.5 2nd Gen is a compact stereo pair with a range of analogue inputs.
The CR3.5 is a desktop system worth comparing if you also use your workspace for general listening.
You can with a system that has a suitable shared power setup. Yamaha says the HS3 uses one amplifier for both speakers; according to the ADAM Audio manual, the D3V’s power supply connects to the left speaker. Also check the plug and connecting cable included with the set on offer.
Position the left and right monitors symmetrically around your listening position. Genelec recommends angling the monitors towards the listener and describes a 60° angle at the listening position as the ideal setup for an equilateral triangle.
The Netherlands Fire Service recommends using approved, undamaged extension leads and advises against connecting them to one another without good reason. If you’re short on sockets, first check which power setup is right for your equipment.
For a consumer purchase, the seller is responsible if a product doesn’t perform as you could reasonably expect under normal use. ACM ConsuWijzer lists free repair, replacement or a refund as possible solutions; there isn’t one fixed warranty period for all products.
Electrical equipment covered by the relevant EU rules must have CE marking. The Dutch Government sets out this requirement for electrical equipment; check the marking on the version actually being offered.