Start by checking how many power sockets you have available and which outputs your audio interface offers. A paired stereo set can combine two speakers with a single mains power supply, while two separately powered monitors need two power supplies. A passive set with an amplifier is worth considering if you already own the amplifier and the specifications are compatible. Compare bass figures only when you also have the measurement conditions, and assess your mix from your own listening position.
Who are these monitors for?
Mixer with one spare power socket
You want to listen in stereo without needing two separate monitor power supplies. IK Multimedia describes the iLoud Micro Monitor as a set with two speakers, one power supply and a connecting cable. Do check the power requirements of the version you’re considering.
Home mixer with a small listening area
You want to assess vocals and acoustic instruments from a fixed position, with enough room for a symmetrical setup. Genelec recommends aiming the monitors at your listening position and keeping the left and right sides as similar as possible.
Mixer with an existing amplifier
You’re considering passive monitors because you already own an amplifier. Check that the impedance, recommended amplifier power and connections are compatible. Avantone Pro specifies the passive Mixcube as 8 ohms.
What should you look for when buying?
| What to consider |
What to look for |
Who is this important for? |
| Number of power sockets |
Count all the power supplies you’ll need and check that the version on offer is suitable for 230 V and 50 Hz. Don’t connect extension leads to one another. |
If I want a complete stereo setup despite having few sockets, I prioritise the number of power supplies. Around 36% of consumers put this need first. |
| Assessing vocals and instruments |
Compare frequency figures only when the measurement conditions are the same, including the dB reference, and listen on another playback system too. |
When mixing vocals and acoustic instruments, I want to assess the balance from my listening position. Around 29% of consumers give this mix assessment top priority. |
| Connecting to the audio source |
Make a note of the outputs on your computer or interface, then check that the inputs and cables required are compatible with the exact model. |
If my interface only has certain outputs, I want to know whether I can connect both stereo channels properly. Around 21% of consumers put this compatibility first. |
| Desk placement |
Check whether you have two suitable positions and aim both monitors at your listening position. |
If my desk has limited space, I still need to be able to position the monitors usefully on the left and right. Around 14% of consumers give the setup top priority. |
Things to watch out for when buying
-
Assuming a set always includes two monitors
A picture showing two speakers doesn’t necessarily tell you how many are included in the box. Genelec lists one 8010A monitor and one mains cable per box, so you’ll need two for stereo.
Before buying, check what’s included in the box and count how many monitors and power supplies you’ll need for your stereo setup.
-
Mistaking a passive speaker for a complete set
A passive speaker doesn’t amplify the source signal itself. The Avantone Mixcube needs a compatible external amplifier and speaker cables.
Choose this option only if your amplifier, connections and speaker impedance are compatible. If you don’t already have an amplifier or cables, you’ll need to arrange these extra components.
-
Comparing bass limits without taking measurement conditions into account
IK Multimedia lists 45 Hz at −10 dB for the iLoud Micro Monitor, while Genelec lists 67 Hz at −6 dB for the 8010A. These figures use different dB conditions and don’t directly tell you how the bass will sound from your listening position.
Compare the specifications along with their measurement conditions, and assess your mix on a second playback system too.
Brands to consider
IK Multimedia
The iLoud Micro Monitor is a paired stereo set for anyone looking to save space and reduce the number of monitor power supplies.
- According to IK Multimedia, the set includes two speakers, one power supply and a connecting cable. The right speaker relies on the supplied 4-pin cable for power and signal.
- The stated 45 Hz figure is at −10 dB and doesn’t measure bass performance from your listening position.
PreSonus
The Eris 3.5 2nd Gen is a compact stereo pair with several types of analogue input.
- PreSonus lists TRS, RCA and 3.5 mm stereo inputs, as well as a speaker cable in the box.
- The stated frequency response starts at 80 Hz. Also check that the mains power supply and plug on the version being offered are suitable.
Genelec
The 8010A is an individually powered active monitor for a setup with compatible XLR outputs.
- Genelec lists one monitor and one mains cable per box, with an analogue XLR input.
- You’ll need two monitors for stereo. Genelec notes that suitability for different mains voltages can vary by version.
Avantone Pro
The passive Mixcube is an option if you already have a suitable external amplifier and want to check your mix on a speaker with a limited frequency range.
- Avantone Pro specifies 8 ohms and a recommended amplifier power of 10–200 W.
- With a stated frequency response of 200 Hz–10 kHz, it isn’t an obvious choice as your only reference for the full low end of a folk mix.
Hercules
Hercules positions the DJMonitor 42 primarily for DJ use and music playback.
- The manual lists two speakers, one mains cable and a connecting cable; the main input is RCA.
- Hercules’ claims about precision are the manufacturer’s own and don’t prove that this set is more accurate for mixing than other monitors.
Joybuy products
Related products coming soon.
Frequently asked questions
Do you need two monitors to assess your demo’s stereo setup?
Yes, you need a left and right speaker for stereo. Check whether the box contains a pair: Genelec sells the 8010A as a single monitor, while PreSonus offers the Eris 3.5 2nd Gen as a pair.
How should you position your monitors if you’re unsure about the bass?
Aim both monitors at your listening position and try to arrange them in a similar way on the left and right. Genelec recommends symmetrical placement and, ideally, an equilateral triangle. Your room and nearby surfaces also affect what you hear, so assess your mix on another playback system too.
Can you connect extension leads together if you don’t have enough power sockets?
No. Brandweer Nederland advises against connecting extension leads together and recommends using approved, undamaged extension blocks. Also check that the monitor or power supply on the version actually being offered is suitable for the Dutch mains supply of 230 V and 50 Hz.
What if the monitors aren’t suitable or develop a fault after an online purchase?
For a standard online consumer purchase, you’ll generally have a statutory 14-day cooling-off period from delivery, with some exceptions. ACM ConsuWijzer explains that the seller is responsible for the statutory guarantee if a product is faulty. In the Netherlands, there’s no fixed limit of exactly two years; it depends on what you could reasonably expect from the product.
Can you plug a 120 V version directly into a Dutch power socket?
No. A version marked for 120 V only isn’t suitable for direct connection to the Dutch mains supply of 230 V and 50 Hz. Check the rating on the version actually being offered, as mains voltage compatibility can vary by version.