Who are these monitors for?

Mixer with one spare mains socket

You want to set up a stereo pair without needing a separate socket for each speaker. So compare the power requirements for the complete set, not just whether a monitor is active.

Jazz mixer checking balance and double bass

You assess instrument placement in stereo and the low end from a fixed listening position. Specifications are a starting point; your setup and room also play a part.

Producer with an existing audio interface

You want the monitors to connect to the outputs you already use, without having to choose a different signal path or unnecessary extra equipment later.

What should you look for when choosing?

Start by checking how many mains sockets the complete stereo pair needs. Then consider placement, the low end and connections in the context of your own mixing setup.

What to consider What should you check? Who should pay particular attention?
Power sockets required Count the mains leads for the left and right speakers, and check the length of the connecting cable. Also allow for the power needs of your computer and audio interface. If I only have one spare socket, I want to know how many sockets the whole pair needs. Around 33% of consumers prioritise the number of mains sockets required.
Stereo image and instrument balance Check whether both monitors can be aimed symmetrically at your listening position. Genelec recommends an equilateral triangle and a 60° angle as a starting point for stereo monitoring. If I want to assess instruments on the left and right, I need a suitable, fixed listening position. Around 27% of consumers prioritise stereo placement and instrument balance.
Double bass and low-end balance Compare frequency specifications alongside their measurement limits: Yamaha lists the HS3 at 85 Hz at −3 dB, Kali Audio lists the LP-UNF at 54 Hz at ±3 dB, and ADAM Audio lists the D3V at 45 Hz at −6 dB. These are not directly equivalent measurements, and your room also affects the low end you hear. If I want to assess the double bass in the mix, I pay attention to both the measurement definition and what I hear from my listening position. Around 20% of consumers prioritise checking the double bass and low-end balance.
Connecting to your equipment Note the outputs on your computer or interface and check that they match the monitors’ inputs. Also check which cables you need and whether the product is a complete stereo pair. If I want to keep using my existing interface, the signal path needs to work with the outputs I already have. Around 20% of consumers prioritise compatibility with their existing equipment.

Common buying mistakes

  • Mistaking a single active monitor for a stereo pair

    The Genelec 8010A is supplied individually, with one mains lead per monitor. You need two for stereo, so allow for two power sockets.

    Before buying, check whether the pack contains one monitor or a pair, and count the power supplies needed for the complete stereo system.

  • Confusing USB-C audio with power from your computer

    The ADAM Audio D3V has a USB-C audio input, but its manual also lists a separate mains lead and power supply.

    Check the audio and power connections separately in the product information or manual.

  • Comparing low-frequency figures with different measurement limits directly

    The models mentioned use measurement limits including −3 dB, ±3 dB and −6 dB. Your room also affects the low end you hear from your listening position.

    Read the measurement definition alongside the frequency limit, and if necessary check important low-end decisions on a second playback system you know well.

Brands to compare

These brands offer relevant models to compare. The features mentioned apply to the specific product ranges and versions.

Yamaha

The HS3 and HS4 series are designed for a compact stereo setup with one active and one passive speaker.

  • Yamaha lists XLR/TRS and RCA inputs, as well as room control settings. The brand specifies 85 Hz at −3 dB for the HS3.
  • Don’t base decisions about the double bass on the frequency limit alone; placement and your room also play a part.

Kali Audio

The LP-UNF is a desktop stereo set with USB-C and analogue inputs.

  • Kali Audio specifies USB-C, balanced TRS and a frequency response starting at 54 Hz at ±3 dB.
  • This stated limit is not directly comparable with specifications that use a different dB measurement limit.

ADAM Audio

The D3V is a compact desktop set with USB-C and analogue TRS.

  • ADAM Audio lists a frequency limit starting at 45 Hz at −6 dB for the D3V. The manual specifies one mains lead and power supply for the set.
  • USB-C audio does not replace mains power. The frequency specification also uses a different measurement limit from some alternatives.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo set with TRS or RCA connections.

  • PreSonus lists a frequency response of 80 Hz to 20 kHz and tone controls for this version.
  • This version does not have a USB audio input. Don’t confuse it with the separate 3.5BT version.

Genelec

The 8010A is a compact active monitor with an XLR input, sold individually.

  • Genelec lists room compensation switches and supplies a mains lead with each monitor.
  • For stereo, you need two monitors and therefore two power sockets.

Joybuy products

Related products coming soon.

Frequently asked questions

Does an active pair of monitors mean that both speakers need their own power socket?

Not always. Yamaha describes the HS3 as a pair with an active left speaker and a passive right speaker, while each active Genelec 8010A monitor is supplied with a mains lead. Check the power requirements and what’s included with the exact version.

How should you position monitors to assess instruments in stereo?

Start with a symmetrical setup, with both monitors aimed at your listening position. Genelec recommends an equilateral triangle and a 60° angle as a starting point; then listen to how your room affects the result.

Can I use USB-C as the power supply for a pair of monitors?

Not on the basis of a USB-C audio input alone. The ADAM Audio D3V manual also specifies a separate mains lead and power supply, so you’ll need to allow for a mains socket.

What can I do if a monitor I’ve bought is faulty?

For a consumer purchase in the Netherlands, the seller must offer a solution if the product does not meet the expectations you were entitled to have. The Dutch Government states that there is no fixed statutory guarantee period in the Netherlands; what you can expect depends, among other things, on the product and how it is used. Many online consumer purchases are also subject to a 14-day cooling-off period, although exceptions apply.