Who are these monitors for?

Loop editor checking the bass

You edit instrumental loops and want to assess the bass in relation to the other instruments. Check the frequency limit and the measurement tolerance, and bear in mind that your room will affect what you hear.

Producer with a small desk

You need space for two monitors that can be positioned symmetrically and at the same height, without taking up more of your workspace than necessary.

Producer with an existing audio interface

You want to connect a stereo pair to your current equipment. So, check which outputs your audio source has and which inputs the model you’re considering uses.

What should you look for?

Genelec recommends a symmetrical listening setup. ADAM Audio and Yamaha state frequency limits using different dB tolerances, so an Hz figure on its own isn’t a reliable basis for comparison.

What to consider What to look for Who is this important for?
Bass response Compare the frequency limit in Hz alongside the dB tolerance, and bear your room in mind too. When editing instrumental loops, I want to know how much bass the monitor reproduces according to its specifications; an Hz figure alone doesn’t tell me enough. Around 36% of consumers prioritise assessing bass.
Desk space and room Measure the space for two cabinets and check whether you can position them symmetrically and at the same height. If my desk has limited space, I want to be able to set up a stereo pair without it getting in the way of my workspace. Around 29% of consumers prioritise desk space and the effect of the room.
Connections Note the outputs on your audio source and compare them with the inputs on the exact model. I want to connect my existing computer, interface or controller without having to figure out which connections I need afterwards. Around 21% of consumers prioritise connecting to their existing audio source.
Complete stereo pair Check whether the retail package contains one monitor or a pair, and which cables you’ll need. I want to know in advance what I need for a complete, ready-to-connect stereo setup. Around 14% of consumers make having a complete stereo pair their top priority.

Common buying mistakes

  • Using the lowest frequency as a direct comparison

    Manufacturers may state frequency ranges using different dB tolerances. A lower Hz figure alone therefore doesn’t show how two models compare on the same measurement basis.

    Always read the frequency limit alongside the dB tolerance, and consider the effect of your room separately.

  • Mistaking a single monitor for a stereo pair

    Product information from Genelec and PreSonus, among others, states that the 8010A and Eris Studio 5 are sold individually.

    Check how many monitors are in the package and whether you can position the two cabinets symmetrically.

  • Relying on room correction instead of good placement

    A room or tuning setting doesn’t guarantee how the monitor will sound in your room. Positioning and your listening spot still affect what you hear.

    First, set up the monitors symmetrically. Then use any available adjustment options in line with the model’s manual.

Brands to consider

Genelec

The Genelec 8010A is a compact active monitor for a cramped workspace.

  • Genelec lists room compensation switches and a width of 121 mm for the 8010A.
  • The stated lower limit is 67 Hz at −6 dB. The 8010A has one analogue XLR input and is packaged individually.

ADAM Audio

ADAM Audio positions the T5V as an active 5-inch nearfield monitor for smaller control rooms.

  • ADAM Audio states a lower limit of 45 Hz at −6 dB for the T5V.
  • The bass reflex port is on the rear. Allow space behind the cabinet and assess its positioning in your own room.

Yamaha

The Yamaha HS5 is an active nearfield monitor with balanced XLR and TRS inputs, plus ROOM CONTROL.

  • Yamaha specifies 74 Hz at −3 dB and 54 Hz at −10 dB for the HS5. Its balanced inputs give you two connection options.
  • The HS5 is packaged individually. The two frequency limits use different tolerances and aren’t directly comparable.

PreSonus

The Eris Studio 5 is an active monitor with a front-facing port and adjustment options including Acoustic Space.

  • PreSonus lists Acoustic Space settings and a 5.25-inch woofer.
  • The Eris Studio 5 is sold individually. The adjustment options listed don’t measure the response in your room.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor with several listening and tuning modes.

  • KRK lists Mix, Focus and Create modes, as well as 25 combinations of boundary settings and EQ.
  • These adjustment options alone don’t determine how the monitor will perform in a particular home studio.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two monitors to edit loops?

To assess a stereo image, choose two compatible monitors, connect them correctly and position them symmetrically at the same height, facing your listening spot. Check whether the model is sold individually or as a pair; Genelec lists the 8010A and PreSonus the Eris Studio 5 as models sold individually.

Will an EQ switch help if the monitor is close to the wall?

A room or tuning setting gives you an extra adjustment option, but it doesn’t replace careful positioning. Follow the manual for your chosen model and assess the setup from your listening spot.

Does an electric studio monitor need a CE mark in the Netherlands?

According to the Dutch government, many electrical products placed on the EU market must carry a CE mark. For the specific model, check that the mark and accompanying product documentation are present. A CE mark says nothing about sound quality.

Can I connect the monitors directly to my existing computer or interface?

That depends on the outputs of your audio source and the inputs on the exact model. The Genelec 8010A has an analogue XLR input; Yamaha specifies balanced XLR and TRS inputs for the HS5. Compare these connections with your existing equipment before choosing cables.