Who are these monitors for?

Listeners comparing level-matched recordings

You switch between recordings and want to distinguish differences in level from differences in sound or mix. The EBU describes loudness measurement as a way to assess different audio material; its −23 LUFS recommendation is intended for broadcast normalisation.

Creators with a small desk

You need space for two speakers that you can position appropriately, and are comparing a compact desktop system with separate nearfield monitors. Genelec notes that the room and the positioning of the speakers and listener affect playback.

Listeners in a quiet shared home

You want to listen at a low volume while being considerate of housemates or neighbours. The Government of the Netherlands says local authorities can set rules on noise nuisance, including noise from neighbours.

What should you look for?

First, decide how you’ll listen to recordings at a comparable level. Then check that you have room for two speakers, that your source connects to the inputs, and that the setup suits your quiet listening environment.

What to consider What should you check? Who is this important for?
Comparing recordings at the same level Check whether your software can measure loudness, and keep the monitor volume and listening position consistent. When I compare recordings, I don’t want to mistake differences in level for differences in sound. Around 33% of consumers prioritise comparing recordings at the same level.
Setting up on a small desk Measure the space available for two speakers, and check symmetry, listening height and placement controls. With a small desk, I want to position two speakers so I have a practical stereo setup from my listening position. Around 27% of consumers put desk placement first.
Listening quietly in a peaceful environment Assess the sound at your usual low volume and listening distance, and bear local noise rules in mind. In a quiet home, I want to listen at a low volume without unnecessarily disturbing others. Around 20% of consumers give quiet listening top priority.
Connections and a complete stereo pair Compare your source’s outputs with the model’s inputs, and check whether the package contains one monitor or a pair. When putting together a stereo pair, I want to know whether my source can drive both channels and what’s included in the box. Around 20% of consumers prioritise suitable connections and a complete pair.

Common pitfalls

  • Mistaking a louder recording for better monitor performance

    A difference in playback volume can affect your comparison, even when you’re using the same monitors.

    Measure or adjust the recordings to a suitable, consistent level before comparing them, and keep the monitor volume unchanged. The EBU recommendation of −23 LUFS is for broadcast normalisation, not automatically for home use.

  • Comparing lower frequency limits without considering how they were measured

    Yamaha gives figures for the HS5 at −10 dB and −3 dB; Genelec gives a lower frequency limit for the 8010A at −6 dB. These measurement points are not directly comparable.

    Note the corresponding dB point for each frequency figure, and assess the bass response at your own listening position too.

  • Budgeting for one monitor as if it were a complete stereo pair

    Yamaha states that the HS5 is packaged individually. You’ll therefore need to allow for two speakers and suitable signal connections to make a stereo pair.

    Before buying, check the sales unit and whether your source can connect to both speakers.

  • Seeing room controls as a substitute for good placement

    Reflections from desks, walls and other surfaces can affect playback, even when a monitor has placement settings.

    First, find a practical stereo and listening position. Then use the available settings to suit that specific setup.

Brands to compare

ADAM Audio

The D3V is a compact desktop system with USB-C and TRS; the T5V is a separate nearfield option for a small control room.

  • ADAM Audio says the D3V has placement switches and comes with stands. The manufacturer lists USB-C and balanced TRS connections.
  • The T5V has a rear-facing bass reflex port. Bear your intended placement in mind when choosing; these model specifications don’t provide an independent comparison of sound or self-noise.

Genelec

The 8010A is an ultra-compact individual monitor for an analogue source.

  • Genelec lists dimensions of 195 × 121 × 115 mm and one analogue XLR input.
  • The stated lower frequency limit of 67 Hz is at −6 dB. Playback at your listening position also depends on the room and speaker placement.

Yamaha

The HS5 is an individual active nearfield monitor for a two-speaker setup with analogue source outputs.

  • Yamaha lists XLR/TRS connections and ROOM CONTROL and HIGH TRIM controls.
  • The HS5 is packaged individually. The figures of 54 Hz at −10 dB and 74 Hz at −3 dB are different measurement points and don’t, on their own, tell you how the bass will sound in your room.

JBL

The 305P MkII is an individual nearfield monitor with settings worth considering for desk or wall placement.

  • JBL says Boundary EQ can reduce the low-frequency boost that may occur when monitors are placed directly on a desk or close to a wall; the model also has HF Trim.
  • These are features described by the manufacturer, not a guarantee of a particular result in every room.

Kali Audio

The LP-UNF is a desktop system with settings for different desk and wall positions.

  • Kali Audio describes placement settings and USB-C, RCA and TRS inputs.
  • The features described by the manufacturer are not independent measurements of performance at your listening position.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need to convert all recordings to −23 LUFS to compare them at home?

No. The EBU recommends −23 LUFS for normalising broadcast programmes. For comparisons, use a consistent loudness measurement and playback method; don’t adopt that broadcast target unless your distribution requirements call for it.

Where should I place the speakers?

Start with a symmetrical listening setup, a clear line of sight between you and the speakers, and the tweeters roughly at ear height. Then check how your desk and room affect playback at your listening position; placement controls don’t replace this check.

What should I check about the connections and what’s in the box?

Compare the outputs on your computer or audio interface with the inputs on the exact model, and check whether the package contains one speaker or a stereo set. When using the monitors, keep both channels and their settings consistent, and follow the chosen model’s manual for installation and maintenance.

What are my rights when buying online in the Netherlands?

For many purchases made online from a business, the Government of the Netherlands states that you have a 14-day cooling-off period. Check the terms and exceptions for your specific purchase. You’re also entitled to a product that meets legal standards of quality. If there’s a problem, contact the seller.

Can I always use studio monitors in a home in the Netherlands, and what are the electrical safety requirements?

Local rules may apply to noise from neighbours; the Government of the Netherlands doesn’t give blanket permission for every noise level or time of day. Business.gov.nl explains that businesses trading electrical equipment in the Netherlands must ensure it complies with European regulations. CE marking requirements apply to the responsible manufacturer when the relevant requirements are met; a CE mark is not an assessment of audio quality.