Who are these monitors for?

Editor with a small desk

You want to assess vocals, instruments and stereo placement, but need to fit two monitors into a limited workspace. So check the setup requirements and the number of speakers in the box early on.

Listener in a quiet room

You work at modest volume and want to avoid speaker or connection noise distracting you. Bass response and power figures alone don’t tell you how quiet the complete setup will sound; assess the model you choose with your own signal chain.

Rhythm-section editor

You make decisions about bass and drums, and need enough space for a suitable monitor setup. Weigh the quoted bass response against your listening position and any additional bass monitoring you may need.

What should you look for?

Compact monitors

Choose these if: desk space is limited and you mainly assess balance, timing and stereo placement in rehearsal recordings.

Bear in mind: a small cabinet doesn’t guarantee quiet operation or suitable deep bass.

Nearfield monitors around 5 inches

Choose these if: you can position two speakers symmetrically around your listening position and your interface has suitable analogue outputs.

Bear in mind: positioning and reflections in the room will still affect what you hear.

Start by checking that there’s room for two speakers and a symmetrical listening position; then consider noise, bass monitoring and connections.

What matters What to look for when buying Who is this important for?
Positioning and stereo image Measure the space for two monitors and a symmetrical listening position; check cabinet dimensions and positioning controls. If desk space is limited, I want to be able to set up two monitors without making my listening position feel cramped. Around 26% of consumers prioritise desk placement.
Noise at low volume Assess the specific model at your usual listening distance and volume, using your own connected equipment. In a quiet room, I want to listen at my usual volume without noise catching my attention. Around 21% of consumers prioritise audible noise at low volume.
Detail and stereo balance Compare the listening distance and positioning options; where possible, assess familiar recordings from your usual listening position. When editing vocals and instruments, I want to assess the balance and stereo placement from my regular listening position. Around 21% of consumers prioritise stereo detail.
Assessing bass Check the dB measurement basis for every quoted lower frequency limit, and listen to the bass at your listening position. If I’m making decisions about bass guitar or kick drum, I want to know what the monitors and my listening position let me hear. Around 16% of consumers prioritise bass monitoring.
Connections and whether you get a pair Check your interface outputs, the cables you need, and whether the offer includes one or two speakers. Before I order, I want to make sure I can set up a connected stereo system and know how many speakers I’ll receive. Around 16% of consumers prioritise connections and a complete pair.

Common buying mistakes

  • Assuming a single-speaker pack is a stereo pair

    For the Yamaha HS5 and Genelec 8010A, the manufacturer states that each pack contains one monitor. PreSonus also distinguishes between Eris Studio monitors sold individually and Essential Eris pairs.

    Before ordering, check how many speakers are included, which outputs your interface has and which cables you’ll need.

  • Comparing only the lowest quoted frequency

    Yamaha quotes 74 Hz at −3 dB for the HS5; ADAM Audio quotes 45 Hz at −6 dB for the T5V. These figures use different measurement limits, so they aren’t directly comparable.

    Check the full frequency specification and make decisions about bass from your own listening position.

  • Expecting positioning controls to fix an unsuitable room

    Walls, your desk and speaker positioning all affect what you hear. Adjustment options can help you set up your monitors, but they won’t eliminate reflections and resonance on their own.

    First, make room for a symmetrical listening position, then use the controls to fine-tune the setup.

    Finding a suitable setup can take extra time; you may need to make changes to your listening position.

  • Assuming maximum power means a monitor will be quiet at low volume

    Power and frequency response don’t tell you how audible the monitor’s self-noise will be from your listening position.

    Assess the specific model with your own connections and usual listening volume; don’t judge noise based on wattage or maximum sound level.

Relevant brands for reference

The features below apply to the specific product lines and models mentioned; they aren’t a general recommendation for every product from each brand.

Yamaha

Yamaha’s European HS series includes the HS5, an active 5-inch nearfield monitor for use with a suitable analogue signal source.

  • Yamaha says the HS5 has XLR/TRS inputs and ROOM CONTROL and HIGH TRIM controls.
  • Yamaha quotes 74 Hz at −3 dB. The HS5 is sold individually; don’t directly compare its bass limit with figures quoted at −6 dB.

ADAM Audio

ADAM Audio describes the T5V as a compact active nearfield monitor for smaller control rooms.

  • ADAM Audio specifies a 5-inch woofer and a lower frequency limit of 45 Hz at −6 dB.
  • The bass reflex port is at the rear. Consider the space behind the monitor and how the bass sounds from your listening position.

JBL Professional

The 305P MkII is an active 5-inch monitor with settings for placement on or near a desk or wall.

  • JBL lists Boundary EQ, HF Trim and balanced XLR/TRS inputs.
  • These settings don’t prove that reflections or audible self-noise will disappear in your room.

PreSonus

The Eris Studio 4 is an active monitor sold individually, with a 4.5-inch woofer.

  • PreSonus specifies a front-firing port and Acoustic Space, mid and high controls.
  • For stereo, check how many monitors are included; features of Essential Eris pairs don’t automatically apply to the Studio 4.

Genelec

Genelec designed the compact 8010A for workspaces where space is limited.

  • According to Genelec, the cabinet measures 195 × 121 × 115 mm and has an analogue XLR input.
  • Genelec states that each pack contains one monitor and quotes a lower limit of 67 Hz at −6 dB; its compact size doesn’t guarantee suitable deep bass or an absence of audible noise.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors to assess the stereo image?

Place both monitors the same distance from your listening position and angle them towards it. Genelec recommends an equilateral triangle as the ideal arrangement for music production; then check how your desk and room affect the sound.

Do you need a larger monitor or a subwoofer for bass guitar?

Not necessarily: first assess the bass response from your listening position, as the room affects it and frequency limits may use different measurement bases. A subwoofer is one option if you need to monitor more bass, but it will need positioning and tuning.

How can you check whether a monitor produces audible noise at low volume?

Assess the model you choose at your usual listening distance and volume, using your own signal chain. Power and frequency response alone won’t tell you whether noise will be audible in your room.

What are your rights when buying online or if a product is faulty in the Netherlands?

The Dutch government generally states that you have 14 days to change your mind when buying online from a business, although exceptions apply. If a product is faulty, the seller must provide a solution; in the Netherlands, there is no fixed two-year statutory guarantee for every product.