Who is this buying guide for?

Comparing recordings critically

You listen repeatedly for small differences between takes and want a stable stereo image and audible detail. Start with positioning and a suitable near-field setup. Genelec provides guidance on monitor placement; Sound On Sound discusses how listening distance and acoustics affect compact monitors.

Working with limited desk space

You combine audio work with a regular home-working desk, so you need to weigh up the dimensions, distance from the wall and connections required. Genelec describes the compact dimensions of the 8010A; Kali Audio provides placement settings for the LP-UNF.

Assessing low frequencies, too

You’re comparing not only vocals and mid-range frequencies, but bass as well. Compare frequency specifications only when the measurement conditions match, and bear in mind the effect of the room. Genelec and Yamaha state different measurement conditions for their frequency limits.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Differences between takes Can you position both monitors at the same height and point them symmetrically towards your listening position? Assess recordings from that fixed spot. When I compare takes critically, I want to assess the left and right channels from the same listening position. Around 36% of consumers prioritise audible differences between takes.
Positioning on a shared desk Measure the space available for two monitors and check whether you can position them symmetrically. Then see which settings are suitable for the distance from the desk and wall. On a shared home-working desk, I want to be able to position two monitors comfortably and take the wall into account. Around 29% of consumers prioritise a suitable desk setup.
Low frequencies Compare frequency limits only when they have the same dB condition; listen in your own room, too. Treat any subwoofer as a separate system choice. If I also need to assess bass differences between takes, I want to know the measurement condition for each frequency limit. Around 21% of consumers prioritise assessing low frequencies.
Connections and stereo pair Compare the outputs on your computer, interface or other source with the model’s inputs. Check how many monitors are included and which cables come with them. I want to be able to connect my existing equipment and know whether I’m buying a complete stereo system. Around 14% of consumers prioritise connections and a complete pair.

Common buying mistakes

  • Assuming one monitor is a stereo pair

    Genelec states that each pack contains one 8010A, Yamaha sells the HS5 individually, and KRK describes the ROKIT 5 Generation Five as a single monitor.

    Check how many speakers are included before you buy. You need a left and a right monitor for stereo; remember to allow for suitable connection cables, too.

    You may need a second monitor and suitable cables to put together a stereo system.

  • Comparing frequency limits without checking the measurement conditions

    A frequency limit at −3 dB isn’t directly comparable with one at −6 dB. What you hear from your listening position is also affected by placement.

    Note the dB condition for each specification, and assess low frequencies in the room where you’ll use the monitors, too.

  • Treating EQ or a particular port as a substitute for good placement

    Kali and KRK describe settings for specific placements, but these don’t make a symmetrical setup or the effect of the room any less important.

    First, make sure you can create a suitable listening setup. Then use settings only for the position they’re designed for.

Relevant brands for this choice

Genelec

Genelec describes the 8010A as a compact active monitor and provides guidance on stereo positioning.

  • According to Genelec, the 8010A measures 195 × 121 × 115 mm including the Iso-Pod and has one analogue XLR input. Its stated lower frequency limit is 67 Hz at −6 dB.
  • The package contains one monitor. The specifications describe the product, not how it will sound in your room.

Kali Audio

Kali describes the LP-UNF as a desktop mixing system, with a choice of input sources and settings for desk and wall placement.

  • Kali specifies USB-C, balanced TRS and unbalanced RCA inputs.
  • The manufacturer’s claim about how it translates to other systems isn’t a guarantee for your listening space. A symmetrical setup remains a separate consideration.

Yamaha

The HS5 is an active near-field monitor with XLR and TRS connections, plus ROOM CONTROL and HIGH TRIM controls.

  • Yamaha gives the HS5 a frequency limit of 74 Hz at −3 dB.
  • The HS5 is packaged individually. Don’t directly compare its frequency limit with values stated under a different dB condition.

ADAM Audio

ADAM describes the T5V as a monitor for small control rooms, with a 5-inch woofer and a rear bass-reflex port.

  • ADAM gives the T5V a frequency range of 45 Hz–25 kHz at −6 dB and lists the T10S as a compatible subwoofer.
  • The manufacturer’s information can’t tell you how the low frequencies will sound in your room; the room still has an effect when the monitor is placed on a desk.

KRK

According to KRK, the ROKIT 5 Generation Five has Mix, Focus and Create modes, as well as placement and EQ settings.

  • KRK lists 25 combinations of placement and tuning EQ.
  • KRK describes the ROKIT 5 as a single monitor. Its settings don’t replace a suitable setup or mean that room problems will disappear.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors to compare takes?

Point both monitors towards your listening position and keep the setup as symmetrical as possible. Genelec recommends an angle of around 60 degrees between the left and right monitors, with the listener ideally at the point of an equilateral triangle. This is placement advice, not a guarantee of flat reproduction in every room.

Can I connect active studio monitors directly to my computer?

It depends on the inputs on the specific model and your computer’s output. Kali specifies USB-C for the LP-UNF; Genelec specifies one analogue XLR input per 8010A. Check whether you need a suitable cable or audio interface for your source.

Should I buy a subwoofer straight away?

Not necessarily. First decide whether low frequencies matter for your comparison, then assess the monitors in their intended listening position. ADAM lists the T10S as compatible with the T5V; placement and the room still affect the bass you hear.

What guarantee and cancellation period apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, you have statutory rights if a product is faulty, in addition to any manufacturer’s guarantee. For online sales, consumers can usually change their mind within 14 days of delivery, subject to legal exceptions. The cancellation period for changing your mind about a purchase and your rights if a product is faulty are separate matters.

What should you check for product safety when buying in the Netherlands?

Business.gov.nl states that sellers of electrical and electronic equipment must ensure products comply with the applicable European rules. Where CE marking is required, government information also refers to the manufacturer’s EU Declaration of Conformity. A CE marking says nothing about sound quality; check the information for the specific version you’re buying.