Who are these studio monitors for?

Guitarist with a crowded dual-screen desk

You’re looking for a stereo pair that won’t disappear behind your screens and can still be angled towards your listening position. Genelec recommends pointing both monitors towards your listening position; ADAM Audio advises avoiding obstacles between the speakers and your ears.

Guitarist reviewing takes and mixes

You have room for two separate nearfield monitors and want to compare connections and placement adjustments for critical listening. Yamaha and JBL list balanced connections and room-positioning settings on the HS5 and 305P MkII respectively.

Guitarist hearing latency while playing

You want to find out whether your input signal is being sent back through your interface or DAW. Focusrite describes direct monitoring through the interface as a way to hear the input signal with virtually no latency.

What should you consider when choosing?

Start with the space available and the position of both screens. Then compare the connections and monitoring settings with your existing interface.

What to consider What should you check? Who is this important for?
Positioning around two screens Measure the available width and depth. Check that both speakers have a clear position and can be angled towards your listening spot. If two screens fill my desk, I want a clear, symmetrical stereo setup. For around 36% of consumers, positioning is the top buying priority.
Reviewing guitar recordings Compare the connections with your interface outputs and check which placement settings the model offers for positioning near walls. When listening back, I want to assess my recorded guitar parts properly. Around 29% of consumers prioritise reviewing takes and mixes.
Monitoring while playing Check your interface’s direct monitoring, headphone output and line outputs, as well as the monitoring settings in your DAW. If I hear latency while playing, I want to know whether it’s coming from my monitoring chain. Around 21% of consumers put monitoring while playing first.
Bass response and a complete set Only compare frequency ranges when they use the same dB measurement limit, and check whether the box contains one monitor or a stereo pair. If I want to assess low frequencies, I also need two suitable monitors for a stereo setup. For around 14% of consumers, bass response and a complete set matter most.

Common buying mistakes

  • Choosing a monitor that sits behind a screen

    A screen that blocks the line of sight and sound gets in the way of a useful stereo position.

    Measure or map out the position of both screens, the speakers and your listening spot before choosing a size.

  • Comparing frequency figures without checking the measurement limit

    Manufacturers specify frequency ranges using different limits, such as -3 dB, -6 dB or -10 dB. These figures aren’t directly comparable.

    For each model, note both the frequency and its corresponding dB limit.

  • Assuming one monitor makes a stereo pair

    Some monitors are packaged individually, while the ADAM Audio D3V is described as a stereo system. You may need a second monitor to make a pair.

    Check the pack size on the product listing, and whether the necessary cables or positioning accessories are included.

  • Choosing new speakers to fix latency

    If the signal is sent back through your computer and DAW, the cause may be your monitoring chain rather than the speakers.

    First, check your interface’s direct monitoring and DAW settings. Focusrite warns that using direct monitoring and software monitoring at the same time can make you hear the same signal twice.

Brands to compare

ADAM Audio

The D3V is a compact active desktop system; the T7V is a larger, separate nearfield monitor. They offer different setup options and aren’t interchangeable versions of the same product.

  • ADAM Audio says the D3V has USB-C, balanced TRS inputs and included stands.
  • According to ADAM Audio, the T7V has a 7-inch woofer and a rear-facing bass reflex port. Check that there’s enough space behind the monitor.

Yamaha

The HS5 is an active 5-inch nearfield monitor sold individually, for a setup with two suitable line outputs.

  • Yamaha lists XLR and TRS inputs, along with Room Control and High Trim settings.
  • Yamaha specifies a limit of 54 Hz at -10 dB for the HS5, among other figures. Don’t compare this directly with figures at -3 dB or -6 dB; the European product information states that it’s packaged individually.

JBL

The 305P MkII is an active 5-inch monitor sold individually, with boundary and high-frequency settings, if there’s enough room to position it beside your screens.

  • JBL lists balanced XLR and TRS inputs, Boundary EQ and HF Trim.
  • These settings can’t replace suitable positioning; consider how the monitors will fit into your own space.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor sold individually, with different listening modes.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of boundary and EQ settings.
  • These features don’t prove that an awkward setup between two screens can be fixed acoustically.

Genelec

The 8020D is a compact nearfield monitor sold individually, for a workspace where available desk space is a key consideration.

  • Genelec lists dimensions of 242 × 148 × 142 mm, including the Iso-Pod.
  • Genelec specifies a response from 56 Hz at -6 dB and states that each pack contains one monitor. Consider the bass response and positioning in your own space.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should I position speakers with two screens between them?

First, make sure neither screen blocks the line of sound between the speakers and your ears. Point both speakers towards your listening position and try to form a symmetrical triangle with it. Then choose a cabinet size that fits.

Will new studio monitors fix latency when playing guitar?

Not if the latency is caused by hearing the signal back through your computer and DAW. Focusrite describes direct monitoring of the input signal with virtually no latency, and warns that software monitoring at the same time can create a doubled signal. Check what your interface can do and whether you want to hear any amp simulation.

Should I order one speaker or a pair?

It depends on the product. Yamaha states that the HS5 is packaged individually, and Genelec that each 8020D pack contains one monitor, while ADAM Audio describes the D3V as a stereo system. Check what’s included in the specific product listing and which cables or stands you’ll need.

What warranty and cancellation rights apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, a product must meet what you could reasonably expect under normal use; the seller is your point of contact for a solution. For online consumer purchases, you generally have a 14-day cooling-off period from delivery, subject to legal exceptions. A manufacturer’s warranty doesn’t replace these rights.

Which product safety rules apply to active monitors in the Netherlands?

Check the product information and documentation for the specific model. According to Ondernemersplein, a Dutch government resource, businesses that place electrical appliances on the market or trade in them must comply with the applicable European rules.