For guitar recordings you listen to while standing, choose a stereo set that you can position symmetrically towards your listening position, with inputs that suit your computer or audio interface. A compact desktop set can be useful if space is limited; separate nearfield monitors offer different placement options, but check whether you need two monitors and any stands. Audible delay while recording is mainly down to the monitoring path through your interface and software, not a larger speaker.
Who are these monitors for?
Guitarist with limited desk space
You’re looking for a compact stereo set that you can position at standing height towards your listening position and connect to your computer or interface. ADAM Audio and Kali Audio specify USB-C and balanced TRS connections for their desktop sets.
Guitarist with an existing audio interface
You want to listen to guitar recordings through your current equipment. Check which outputs your interface has and how you monitor while recording; the right connections vary by model.
Guitarist who mixes recordings critically
You pay attention to having a consistent listening position, the effect of your desk and room, and what frequency specifications do and don’t tell you about the bass. Genelec provides guidelines for symmetrical monitor placement; the final setup also depends on your room.
What should you look for when choosing?
For shoppers who want to listen to guitar recordings at a sit-stand desk, the main considerations are placement, connections, assessing the bass and choosing a complete stereo set.
Compact active desktop set
A good fit if: you have limited space and can position both speakers symmetrically towards your listening position at standing height. The ADAM Audio D3V and Kali Audio LP-UNF are stereo pairs with USB-C and balanced TRS inputs.
Bear in mind: check that the supplied or chosen feet and stands position the speakers at the right height and angle.
Two separate active nearfield monitors
A good fit if: you have room for two separate speakers and your interface outputs are compatible with their inputs. The Genelec 8010A has an analogue XLR input on each monitor; the Yamaha HS5 offers XLR and TRS inputs.
Bear in mind: according to Genelec, the Genelec 8010A package contains one monitor, so you’ll need two for stereo.
| Consideration |
What to check before buying |
Who is this most important for? |
| Placement at standing height |
Decide where you’ll listen while standing and check whether two monitors can be positioned or angled symmetrically at the right height. |
When I listen standing up, I want to be able to point both speakers towards the same listening position. Around 36% of shoppers say placement at standing height is their main purchasing concern. |
| Connections and monitoring |
Check your interface outputs, the cables you’ll need and the monitoring path you’ll use while recording. |
I want to use my existing recording setup and know how I’ll hear myself during a take. Around 29% of shoppers prioritise connections and monitoring while recording. |
| Bass and room acoustics |
Compare frequency limits only when they use the same measurement basis, and check which placement or room settings the exact model offers. |
When assessing a guitar recording, I want to know what the stated bass response tells me and how my room affects what I hear. Around 21% of shoppers say this is their main purchasing concern. |
| Complete stereo set |
Check whether the offer includes one monitor or a pair, and which feet, cables and other parts are included. |
Before buying, I want to know whether I have everything I need for stereo and a suitable setup. Around 14% of shoppers prioritise buying everything needed for stereo in one go. |
Common buying mistakes
-
Comparing bass specifications without checking the measurement basis
ADAM Audio lists 45 Hz at −6 dB for the D3V; Kali Audio lists 39 Hz at −10 dB for the LP-UNF. As the measurement definitions differ, these limits aren’t directly comparable.
Check the dB definition alongside the specification, and consider whether you can position the speakers where you intend to listen.
-
Mistaking a single monitor for a stereo set
Genelec lists one 8010A monitor per package, whereas ADAM Audio sells the D3V as a desktop set. The number of speakers included therefore varies by offer.
Check what the sale includes and which cables and stands you’ll need for your setup.
You’ll need two Genelec 8010A monitors for stereo, and may also need suitable cables or stands.
-
Expecting new speakers to fix recording delay
Focusrite explains that monitoring delay depends on the signal path through your interface and software. A larger monitor won’t change that path.
Before buying, check how your own interface and software handle monitoring while you record.
Brands to consider
ADAM Audio
The D3V is a compact active desktop set; the T5V is a separate 5-inch nearfield monitor.
- According to ADAM Audio, the D3V has USB-C and balanced TRS inputs, supplied feet and 3/8-inch mounting points.
- The T5V has a rear-facing bass reflex port. Allow for the distance from the wall when positioning it. Manufacturer specifications aren’t an independent listening test.
Kali Audio
Kali describes the LP-UNF as an active ultranearfield stereo pair for desktop mixing, with USB-C and balanced TRS inputs.
- According to Kali Audio, it has separate settings for desk, stand and wall placement, as well as a front-facing port.
- These settings don’t remove the effect of the room or the importance of symmetrical placement.
Genelec
The 8010A is a compact, separate active monitor with an analogue XLR input.
- Genelec lists an Iso-Pod as included with the monitor.
- The package contains one monitor. You’ll need two for stereo; also check that your interface output is compatible with XLR.
Yamaha
The HS5 is an active 5-inch nearfield monitor with XLR or TRS connections.
- Yamaha lists ROOM CONTROL and HIGH TRIM settings.
- The stated dimensions are 170 × 285 × 222 mm. Check that two monitors will fit in the space you have in mind.
KRK
The ROKIT 5 Generation Five is a separate active 5-inch monitor with settings for different listening and placement situations.
- KRK lists three voicing modes and 25 combinations of placement and EQ settings.
- These are manufacturer features, not a guarantee that the monitor will suit every room and setup without further adjustment. The listed unit is one monitor.
Joybuy products
Related products coming soon.
Frequently asked questions
How should I position two monitors if I listen standing up?
Point both monitors towards your listening position while standing, keeping the distances on the left and right equal. Genelec recommends a 60° angle between the monitors and an equilateral triangle as a guide; adjust the height to suit your listening position.
Can a studio monitor with USB-C record my guitar directly?
No. The USB-C playback input on, for example, the ADAM Audio D3V isn’t the same as an instrument input for a guitar. Check how your guitar connects to your audio interface; Focusrite specifies an instrument input and separate monitor outputs for the Scarlett 2i2 4th Gen.
What can I do if I hear my guitar with a delay?
First, check the monitoring path through your interface and software. Focusrite describes direct monitoring on compatible interfaces as a way to send the input signal to headphone or line outputs with virtually no delay. Consult your interface manual and check that the same signal isn’t coming through two paths at once.
What are my rights if I buy online and an item is faulty?
Many online consumer sales contracts in the Netherlands come with a 14-day cooling-off period, although exceptions apply. This is separate from the legal guarantee: the Dutch government states that there’s no fixed statutory guarantee period, and that you should contact the seller if there’s a problem with the product.
What should I check about EU conformity for active monitors?
Whether CE marking is required depends on the rules that apply to the specific product. According to Your Europe, the marking applies only to product groups for which harmonised EU rules specifically require it; check the product information for the exact model. CE marking isn’t an assessment of sound quality.