What should you look for when choosing?
Genelec points out that room acoustics and positioning both affect what you hear. Use these criteria to decide what suits your desk and recording setup, rather than as a guarantee of a particular sound.
Compact desktop pair
A good fit if: you have little permanent desk space and listen close to the speakers.
Bear in mind: check whether both speakers will fit around your screen and whether there’s room for the necessary cables. Desktop settings won’t remove the room’s influence on the sound.
Two separate nearfield monitors
A good fit if: you can position each speaker separately and your audio interface has suitable line outputs.
Bear in mind: work out how much space and cabling the complete setup will need, and check whether the offer includes one monitor or a pair.
Headphones while recording
A good fit if: you don’t want to disturb others at the desk or are recording with a microphone.
Bear in mind: headphones don’t replace every check on speakers. When using direct monitoring, also check your interface and DAW settings.
| What to consider |
What should you check? |
Who is this important for? |
| Positioning on a shared desk |
Measure the available space and check whether both speakers will fit around the screen and can be angled towards your listening position. |
If my desk is already full, I want to know whether two monitors will fit around the screen. Around 27% of consumers put positioning first. |
| Listening without disturbing others |
Work out when you can use speakers and whether your interface has a suitable headphone output. |
If I don’t want to disturb others or am recording with a microphone, I want a quiet listening option. Around 27% of consumers put consideration for others first. |
| Connections and direct monitoring |
Compare your interface’s outputs with the monitors’ inputs, and check the monitoring settings on your interface and in your DAW. |
I want to hear my guitar without a doubled or delayed signal and use a suitable connection. Around 20% of consumers put connections and monitoring first. |
| Assessing guitar and backing tracks |
Check whether you can position both speakers properly; only compare frequency ranges when the measurement definitions match. |
If I want to assess a mix, I need room for a usable stereo setup. Around 13% of consumers put mix checking first. |
| Putting together a complete setup |
Check how many speakers are included and which cables or other connections you’ll need. |
I want to know in advance what I need to connect the complete stereo setup. Around 13% of consumers put the complete purchase first. |
Joybuy products
Related products coming soon.
Frequently asked questions
How should I position monitors when there’s also a screen on the desk?
Start with your usual listening position and check whether both speakers can be placed suitably around it. The desk, screen and walls all affect the listening environment. Placement settings may help, but they won’t make the room acoustically neutral.
Why can I hear my guitar twice while recording?
When using direct monitoring through an interface, you may hear both the direct signal and the delayed DAW signal at the same time. Focusrite advises turning off simultaneous software monitoring for that recording when using direct monitoring, following your interface’s instructions.
Do I need headphones as well?
Headphones can be more practical if you don’t want to disturb others or are recording with a microphone. Focusrite recommends closed-back headphones to reduce background noise during microphone recordings; you can also check the recording on speakers afterwards.
What warranty and cooling-off period apply when buying online in the Netherlands?
For purchases covered by Dutch consumer law, the seller is your point of contact if a product is faulty and you need a solution. According to the Dutch government, distance purchases often come with a 14-day cooling-off period. Check the terms and exceptions that apply to your purchase.
Can an electric studio monitor without a CE mark be sold as an EU version?
According to the Dutch government, electrical equipment covered by the relevant EU product rules must carry the required CE marking. The rules that apply depend, among other things, on the electrical design. So check the version being offered, and don’t assume a model name is proof that every variant or seller complies.