Who are these monitors for?

Guitarist with one spare socket

You want to listen in stereo where you record. Check that the power supply included with the set powers both speakers, and see which cables are included.

Guitarist with an audio interface

You want to listen to your recorded guitar and computer audio through compatible monitor outputs. Consider the difference between direct monitoring and listening through recording software.

Guitarist with a small desk

You need to fit two speakers around your listening position. Their placement and the room itself affect how you assess the stereo image and your mix.

What should you look for?

Linked powered stereo pair

A good fit when: you have one power socket available for the monitors and the set has a suitable input for your interface.

Bear in mind: the cable connecting the speakers may limit where you can place the second speaker.

Two separately powered active monitors

A good fit when: you have power sockets and room for both speakers.

Bear in mind: check whether the listing includes one monitor or a pair, and allow for power and audio cables for both.

Passive monitors with an amplifier

A good fit when: you already have a suitable amplifier and want to pair passive speakers with it.

Bear in mind: without a suitable amplifier, you’ll need an extra device, cables and a power connection. An additional reference monitor won’t automatically replace a monitor that reproduces the full low end.

What to consider What should you check? Who is this important for?
Power sockets required Check whether one power supply powers both speakers, and remember to count the sockets needed for your computer, interface and any amplifier. If you only have one spare socket, you’ll want to know whether one mains connection powers the whole stereo pair. Around 36% of consumers prioritise the number of power sockets required.
Connection to your recording setup Compare your interface’s outputs with the monitors’ analogue inputs. Also decide whether you want to hear the direct signal or software plug-ins. If you want to listen to your recorded guitar through the interface, you’ll need a suitable signal path and want to know what you’ll hear while playing. Around 29% of consumers give this connection and monitoring the highest priority.
Stereo placement and mix assessment Measure the space available for both speakers, and only compare frequency figures when they use the same measurement conditions. If your desk has limited space, you’ll want to position both speakers around your listening position and assess your mix properly. Around 21% of consumers prioritise placement and mix assessment.
Complete stereo pair Check whether the listing includes one speaker or a pair, and which power supply and cables are included. If you want to monitor in stereo, you’ll want to know in advance whether you have two speakers and the connections you need. Around 14% of consumers give a complete setup the highest priority.

Common buying mistakes

  • Assuming a linked stereo pair means two freely positionable speakers

    Some sets use a specific cable to connect the second speaker to the first. This cable can limit how far apart you can position them.

    Check whether the connecting cable is included, and measure the distance you need for your stereo setup in advance.

    A cable that’s too short or missing could mean you need to change your setup or find a suitable replacement cable.

  • Buying a passive monitor to avoid using a socket

    A passive speaker needs a suitable amplifier. If you don’t already have one, you may simply end up needing a power connection for an extra device instead.

    Consider this option if you already have a suitable amplifier and know what role the passive monitor will play in your listening setup.

  • Relying on the lowest stated frequency as decisive proof

    ADAM Audio lists a low-frequency limit of −6 dB for the D3V; Kali Audio gives 39 Hz at −10 dB for the LP-UNF. These figures use different measurement conditions, and your room affects what you hear at your listening position.

    When comparing frequency figures, check the stated dB condition and consider whether you can position the monitors effectively.

Brands to consider

ADAM Audio

The D3V is a compact powered desktop stereo pair with USB-C audio and two balanced TRS inputs. The T5V is a standalone powered nearfield monitor.

  • ADAM Audio lists placement switches and stands for the D3V.
  • Check the power supply and connection between the speakers for the specific D3V model. The standalone T5V isn’t the same solution if you only have one spare power socket.

PreSonus

The Eris 3.5 2nd Gen is sold as a pair and has balanced TRS inputs, RCA inputs and a headphone socket on the front.

  • PreSonus lists an included speaker cable and a stated frequency response starting at 80 Hz.
  • Check the power supply for the model on offer and whether its stated frequency response suits your mixing needs. This isn’t the Eris 3.5BT.

Kali Audio

Kali Audio says the LP-UNF is designed for desktop mixing and has USB-C, balanced TRS and RCA inputs.

  • Kali Audio describes settings for different desk and wall positions.
  • The stated frequency response of 39 Hz is measured at −10 dB; on its own, this doesn’t tell you how flat the low end will sound at your listening position. Check the power supply and connecting cables included with the listing.

Yamaha

The HS5 is a powered nearfield monitor sold individually, with XLR and TRS inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM for the HS5.
  • You’ll need two for stereo, so check that you have room and power sockets for both. The stated low-frequency limit of 54 Hz is measured at −10 dB.

Avantone Pro

The Mixcube Passive is a passive mini reference monitor for use with an existing amplifier setup.

  • Avantone Pro positions the monitor as an additional way to check audio on devices with limited low-end response, and states a frequency response of 200 Hz–10 kHz.
  • It won’t necessarily be the only monitor you need to hear the full low end of a guitar recording. Also check amplifier compatibility and how many are included in the sale.

Related products

Related products coming soon.

Frequently asked questions

Can I connect my guitar directly to the USB-C socket on an ADAM Audio D3V to record?

No. ADAM Audio describes the D3V’s USB-C connection as an audio connection for playback from a computer or mobile device. Connect your guitar to equipment with a suitable recording input, then check how the monitors receive its output signal.

Why do I hear an echo while I’m playing?

If your interface plays both direct monitoring and monitoring through recording software, the same signal may reach you twice. For the Scarlett setup described, Focusrite recommends muting the recording track in the software when using direct monitoring. You won’t hear software plug-ins through that direct signal path.

How should I position two studio monitors?

Point both monitors towards your listening position and try to create similar distances and conditions on the left and right. Genelec explains that room reflections and asymmetry affect the stereo image, so adjust the final positioning to suit your room.

What are the cooling-off period and guarantee rules in the Netherlands?

For online purchases, ACM ConsuWijzer says you’ll usually have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. You’re also entitled to a statutory guarantee that the product is of satisfactory quality. The Dutch government says there is no fixed statutory guarantee period in the Netherlands; if there’s a problem, contact the seller.

Does a CE mark prove that a monitor sounds good?

No. For products that must carry a CE mark under specific EU rules, the manufacturer uses it to declare that the product complies with those rules. It isn’t an assessment of sound quality. For electrical equipment, also check that the model and power supply on offer are suitable for use in the Netherlands.