Who are these monitors for?

Producer with a small desk

You need to fit two speakers around your screen and angle them towards a practical stereo listening position. Genelec recommends starting with a symmetrical setup.

Guitarist checking mix decisions

You assess the balance and stereo image of your recordings, and don’t want to mistake room reflections for characteristics of the monitors. Genelec notes that calibration does not always resolve every acoustic issue.

Home worker with existing audio equipment

You want to check that the outputs on your existing equipment are compatible with both monitors, and whether you’re buying one speaker or a stereo pair. Yamaha and Genelec list the HS5 and 8010A as individually packaged.

What should you look for when choosing?

Start by checking the space for two speakers and your signal chain. Then compare the settings and frequency specifications of models that will actually fit your workspace.

Compact active nearfield monitors

Choose this option: if two larger cabinets won’t fit comfortably beside your screen and you can position two separate speakers.

Bear in mind: the Genelec 8010A is 121 mm wide, but its specified lower limit is 67 Hz at −6 dB and the package contains one monitor.

Active nearfield monitors with room controls

Choose this option: if two cabinets will fit and you want to compare settings such as ROOM CONTROL, HIGH TRIM or Acoustic Space.

Bear in mind: the Yamaha HS5 and ADAM Audio T5V have different specified measurement limits; room controls are no substitute for good positioning.

Passive monitors with an amplifier

Choose this option: if you want to select your speakers and a suitable amplifier separately.

Bear in mind: passive monitors need an external amplifier, so you’ll need to make sure the entire connection chain is compatible.

What to consider What to look for when buying Who is this important for?
Positioning and desk space Measure the space for two cabinets and check that you can angle both towards the same listening position. If I don’t want to overcrowd my screen and desk, I need to know whether two monitors will fit symmetrically. Around 36% of consumers prioritise how easily they can be positioned.
Assessing the sound Compare frequency ranges only when you know the measurement basis, and check which settings each model offers. If I want to assess guitar balance and bass, I need to consider how my desk, walls and listening position affect the sound. Around 29% of consumers put sound assessment first.
Connecting to your equipment Check the outputs on your equipment, the inputs on both monitors and which cables you’ll need. If I want to use my existing equipment, the connections need to work with both channels. Around 21% of consumers prioritise connection compatibility.
Complete stereo setup Check how many speakers are included and whether you’ll need cables or an amplifier. If I want to work in stereo, I need to know which components I’ll need for two channels before buying. Around 14% of consumers prioritise buying a complete stereo setup.

Common mistakes when choosing

  • Assuming one monitor is a complete stereo setup

    Genelec lists one 8010A per package, and Yamaha packages the HS5 individually. So one monitor won’t automatically give you two channels for stereo production.

    Check what’s included in the specific offer and decide in advance how many speakers you need.

    You may need a second monitor for two channels; also check whether your setup requires suitable cables.

  • Looking only at the lowest specified frequency

    Yamaha specifies a lower limit of 74 Hz at −3 dB for the HS5, while ADAM Audio lists 45 Hz at −6 dB for the T5V. These limits use different measurement bases, and your room affects what you hear.

    Note the tolerance shown alongside the frequency range and assess the setup from your listening position.

  • Assuming EQ will make up for poor positioning

    Reflections from surfaces such as your desk and screen can affect how you judge the sound. Genelec says that calibration is not always enough to resolve acoustic issues.

    First check the space, symmetry and reflections; then decide which settings will be useful for your setup.

    You may need to adjust the positioning or the room before your listening position is suitable.

Brands to compare

Genelec

The 8010A is a compact model to consider if space beside your screen is limited.

  • Genelec lists a width of 121 mm and one analogue XLR input per monitor.
  • The manufacturer specifies 67 Hz at −6 dB; the package contains one monitor. These specifications alone can’t predict how the bass will sound in your room.

Yamaha

The active HS5 is a nearfield option if two separate cabinets will fit and the connections are compatible.

  • Yamaha lists ROOM CONTROL, HIGH TRIM, and XLR and TRS inputs.
  • The specified lower limit is 74 Hz at −3 dB. Don’t compare this directly with frequency limits measured at −6 dB; the HS5 is packaged individually.

ADAM Audio

The T5V is an active 5-inch nearfield monitor; you’ll also need to consider where to position its bass reflex port.

  • ADAM Audio lists a rear-firing bass reflex port and a specified range starting at 45 Hz at −6 dB.
  • Allow for the rear-firing port when positioning the monitor, and assess the result in your own room.

PreSonus

The Eris Studio 5 is worth considering if you want to take room controls and port positioning into account.

  • PreSonus lists Acoustic Space control and a front-firing bass reflex port.
  • The presence of a control alone doesn’t prove that guitar will sound better at your listening position.

KRK

The ROKIT 5 Generation Five is worth comparing if you want to explore different listening modes.

  • KRK lists Mix, Focus and Create modes, as well as 25 EQ combinations.
  • These settings don’t remove the need to assess your actual setup and listening position.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Where should I position two monitors when mixing guitar tracks in stereo?

Angle both monitors towards your listening position and try to keep the distance, height and conditions near the walls the same on the left and right. Genelec describes an equilateral triangle as the ideal starting point; adapt this to what’s practical in your workspace.

Will a monitor’s room EQ fix reflections from a desk or a problematic room?

Not necessarily. Genelec says that calibration is not always enough to resolve acoustic issues, and also highlights reflections from desks and screens. Start with your setup, then assess whether you need to make changes to the room.

Do active monitors need an additional amplifier?

No. Active monitors have a built-in amplifier. Do check that the outputs on your equipment are compatible with the inputs on both monitors; passive monitors need an external amplifier.

Is one monitor enough to mix guitar tracks in stereo?

No, you need two monitors for a stereo pair. Genelec lists one 8010A per package, and Yamaha packages the HS5 individually, so check how many speakers are included in the specific offer.

What does a CE mark tell me about an active studio monitor?

According to the European Union, a CE mark indicates that the manufacturer declares the product complies with the applicable EU product rules. It isn’t an independent listening test or a general quality mark; the rules that apply depend on the product.