Who is this relevant to?

Guitar editor with one free socket

You want to use a stereo pair without needing a separate power socket for each monitor. Check the power supply, the cable between the speakers and the mains specification for the exact set; ADAM Audio, for example, describes the D3V as using a single power supply.

Home editor with an audio interface

You assess pick attack and unwanted noise in guitar recordings, and want your interface outputs to match the monitor inputs. PreSonus and Kali Audio list TRS connections, among others; check which output signal and cable your interface uses.

Laptop editor at a small desk

You want to position two monitors comfortably and check whether USB-C audio works directly with your computer. ADAM Audio and Kali Audio list USB-C audio for the D3V and LP-UNF respectively; also check that your computer supports that audio connection.

What should you look for?

USB-C audio with a single power supply

Choose this if: your computer supports USB-C audio and you want a compact set with a single power supply. ADAM Audio lists USB-C, balanced TRS inputs and a connecting cable for the D3V.

Trade-off: check the mains cable and positioning; a monitor’s placement settings don’t guarantee suitable sound in every room.

Analogue connection via an interface

Choose this if: you want to use your interface’s existing analogue outputs. The PreSonus Eris 3.5 2nd Gen has TRS, RCA and 3.5 mm inputs; the IK Multimedia iLoud Micro Monitor has one active and one passive speaker.

Trade-off: check the connections, generation and supplied cables for each model. PreSonus gives the Eris 3.5 2nd Gen a frequency range starting at 80 Hz, but this isn’t a measurement from your listening position.

USB-C, analogue inputs and placement options

Choose this if: you want to compare different inputs and placement settings. Kali Audio lists USB-C, TRS and RCA for the LP-UNF.

Trade-off: Kali Audio specifies 39 Hz at −10 dB and 54 Hz at ±3 dB; only compare frequency limits when the measurement conditions match.

Two separately powered monitors

Choose this if: you have a mains socket available for each monitor and want to compare separate nearfield monitors.

Trade-off: this setup needs more free mains sockets for the monitors than a pair with a single power supply.

What to consider What to check before buying Who is this most important for?
Number of mains sockets Check whether the exact set uses one or more power supplies and whether the cable connecting the monitors is included. If you only have one free socket, you’ll want to know whether both monitors can run from a single power supply. Around 36% of consumers prioritise the number of mains sockets when buying.
Editing guitar Look at frequency specifications alongside their measurement conditions, and check important edits on a second playback system too. When you assess pick attack, unwanted noise and balance, you’ll want to know what you can hear from your usual listening position. Around 29% of consumers prioritise sound reproduction when editing guitar.
Symmetrical placement Measure the space for both monitors and check that the connecting cable is long enough for your preferred setup. At a small desk, you’ll want to position the left and right monitors comfortably and symmetrically. Around 21% of consumers give top priority to positioning at their workstation.
Suitable audio connection Compare your computer or interface outputs with the monitor inputs, and check which cable you’ll need. If you want to use your existing laptop or audio interface, the audio connection needs to be compatible. Around 14% of consumers start by checking the connection to their existing equipment.

Common buying mistakes

  • Assuming every active pair needs two plugs

    Power arrangements vary by set: some pairs have one powered speaker connected to the other by a cable, while other setups may need separate mains sockets.

    Check how many power supplies and speaker cables are included with the exact version.

  • Comparing frequency limits without checking the measurement conditions

    Kali Audio lists different frequency limits for the LP-UNF under different measurement conditions. These figures don’t mean the same thing, and on their own they can’t tell you how the guitar will sound from your listening position.

    Only compare figures measured on the same basis, and assess the sound from your own listening position too.

  • Confusing one model generation with another version

    The PreSonus Eris 3.5 2nd Gen and the Eris E3.5 are different model names; don’t assume they have the same connections or included components.

    Check the full model name, generation, set contents and included power connection.

  • Mistaking Bluetooth for the editing connection

    Bluetooth as an additional input doesn’t confirm that the monitors will connect to your editing computer in the right way.

    First choose a suitable wired USB-C audio or analogue connection for your equipment, and treat Bluetooth as an additional input.

Brands to consider

ADAM Audio

The D3V is a compact stereo pair with USB-C audio, balanced TRS inputs and a single power supply.

  • ADAM Audio lists placement compensation and a 2-metre speaker connecting cable.
  • Placement settings don’t predict how the set will sound in every room; also check the mains cable supplied with the exact version.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair with TRS, RCA and 3.5 mm inputs.

  • PreSonus lists high- and low-frequency controls and an included speaker cable.
  • The stated frequency range starts at 80 Hz; check that the analogue inputs suit your source, and don’t confuse this model with the Eris E3.5.

Kali Audio

The LP-UNF is a desktop pair with one powered and one passive speaker, plus USB-C and analogue inputs.

  • Kali Audio lists settings for different placement scenarios and USB-C, TRS and RCA inputs.
  • The manufacturer specifies 39 Hz at −10 dB and 54 Hz at ±3 dB; treat these as different measurement conditions, not directly comparable figures.

IK Multimedia

The iLoud Micro Monitor is a compact master-slave stereo pair with one active and one passive speaker.

  • IK Multimedia describes a dedicated 4-pin cable between the speakers and lists RCA and 3.5 mm inputs.
  • Check that the connecting cable and analogue inputs suit your setup; USB-C audio isn’t listed as an input for this model.

JBL

The 104-BT is a compact stereo pair with a master and an expansion monitor; Bluetooth is an additional input.

  • JBL lists a 2-metre connecting cable and a regional mains cable.
  • Check that the regional version and mains cable are suitable for your socket; a Bluetooth input doesn’t automatically replace a wired audio connection to your computer.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Does a stereo pair always need two power sockets?

No, some stereo pairs use a single power supply for the set and connect the second speaker with a cable. Check what’s included with the exact version; your computer or audio interface may also need its own socket.

Can you listen directly from your laptop?

Yes, if your laptop provides compatible USB-C audio and the monitors have that input, as ADAM Audio and Kali Audio specify for the D3V and LP-UNF. For an analogue set, such as the PreSonus Eris 3.5 2nd Gen, your laptop or interface output and the required cable must match the inputs. USB-C audio doesn’t mean the monitors don’t need mains power.

How should you position monitors for stereo editing?

Place them symmetrically to your left and right, angled towards your listening position. Genelec recommends an equilateral triangle for stereo monitoring, with your listening position at the apex; also take the available space and your chosen model’s instructions into account.

What electrical details should you check when using them in the Netherlands?

Check the manual and the equipment itself to make sure the specified input voltage, frequency and mains cable are suitable for the Dutch mains supply of 230 volts and 50 hertz, as described by Netbeheer Nederland. The Dutch government explains the relevant safety requirements for electrical appliances; a brand name alone doesn’t confirm that a specific version meets those requirements.