Who are these monitors for?

Standing editor with limited desk space

You want to listen to guitar tracks up close without speakers taking up space in front of your screen or crowding your desk. Adjustability and a consistent listening position matter.

Guitarist who mixes critically

You assess things like balance and stereo imaging, and want to account for how your desk and room affect what you hear.

Editor with an existing audio interface

You want to check that the monitors’ inputs match your existing outputs and find out what you need for a complete stereo pair.

What should you consider when choosing?

Compact active desktop set

A good fit if: you have limited desk space or want to use USB-C audio directly from a computer. According to their manufacturers, the ADAM D3V and Kali LP-UNF support USB-C audio.

Keep in mind: USB-C and placement settings won’t automatically eliminate reflections from your desk or room.

Separate compact monitors

A good fit if: you want to position each speaker independently on stands and have suitable analogue outputs. The Genelec 8010A has an analogue XLR input on each monitor.

Keep in mind: the 8010A is sold individually, so you’ll need two monitors for stereo.

Genelec recommends a symmetrical stereo setup, with the listener at the point of an equilateral triangle. Angle both monitors towards your usual listening position.

What to consider What to look for Who is this most relevant to?
Listening height and placement Check that you can angle the speakers towards your listening position whether you’re standing or sitting. ADAM lists removable feet and 3/8-inch mounting points for the D3V. When I’m editing standing up, I want to be able to angle both speakers towards my ears without cluttering my desk. Placement is the top priority for around 25% of consumers.
Assessing guitar tracks Plan to position two speakers at the same height and equal distances from your listening position. Genelec emphasises that listening height and placement affect stereo imaging. When I’m assessing balance and stereo imaging, I want to avoid letting an asymmetrical setup influence my judgement. Around 25% of consumers put critical track assessment first.
Connecting to your equipment Compare the outputs on your computer or audio interface with the inputs on the exact model. The ADAM D3V and Kali LP-UNF offer USB-C and balanced TRS; the Genelec 8010A has an XLR input on each speaker. When I want to keep using my existing equipment, I look for a signal path that matches its outputs. Connection options are the top priority for around 19% of consumers.
Desk, walls and bass Check the space available around the speakers and the measurement conditions given for the stated frequency ranges. Kali LP-UNF lists 54 Hz–21 kHz at ±3 dB and 39 Hz–25 kHz at −10 dB; these figures aren’t directly comparable. When I’m assessing the low end of a guitar track, I want to know how my placement and room could affect the sound. Room acoustics and bass are the top priorities for around 19% of consumers.
Complete stereo pair Check the contents listed for the exact offer. Genelec lists one 8010A per pack; Hercules lists a left and right speaker with a connecting cable for the DJMonitor 42. When I need a complete left-and-right setup, I want to know what’s in the box in advance. Around 12% of consumers put a complete stereo pair first.

Common buying mistakes

  • Mistaking one monitor for a stereo pair

    Genelec lists one monitor per pack for the 8010A, while Hercules lists a left and right speaker for the DJMonitor 42. The contents therefore vary by model.

    Before choosing a complete setup, check the exact offer to see how many speakers and which cables are included.

    You’ll need two 8010A monitors for a stereo pair. Depending on your setup, you may also need a suitable cable or stand.

  • Comparing frequency ranges without checking the measurement limit

    Kali lists both 39 Hz at −10 dB and 54 Hz at ±3 dB for the LP-UNF. These figures use different measurement limits.

    Check the dB condition for each frequency range and assess the monitor in the setup you intend to use.

  • Forgetting your standing listening position

    According to Genelec, height, symmetry and reflections all affect what you hear at your listening position. A compact cabinet alone won’t give you a suitable setup.

    Work out where your ears are when you’re editing critically, then consider how to angle both speakers towards that position.

    Depending on your workspace, you may need suitable stands or mounting options to position the speakers at the height you want.

  • Assuming the connection or calibration kit will be suitable

    The models covered have different USB-C and analogue inputs. IK Multimedia specifically lists the measurement microphone with the pair version of the iLoud Micro Monitor Pro.

    Compare the connections and contents listed for the exact version with your existing equipment.

    Depending on the connection or version you choose, you may need suitable cables or a measurement microphone.

Brands to consider

ADAM Audio

The D3V is designed for a compact desktop setup; the T5V is a separate nearfield monitor that requires space for two speakers.

  • According to ADAM Audio, the D3V has USB-C, balanced TRS inputs, removable feet and 3/8-inch mounting points.
  • ADAM Audio lists a 5-inch woofer and rear bass-reflex port for the T5V.
  • Features of one model don’t automatically apply to another.

Kali Audio

According to Kali Audio, the LP-UNF is designed for desktop mixing and has settings for different desk and wall positions.

  • Kali Audio lists USB-C, balanced TRS and placement settings.
  • The stated 39 Hz figure is a −10 dB limit, so it isn’t directly comparable with frequency ranges measured at a different limit.

Genelec

The 8010A is a compact active monitor sold individually, suited to smaller spaces or placement on separate stands.

  • Genelec lists compact dimensions and an analogue XLR input.
  • The pack contains one speaker. The low-frequency cut-off is 67 Hz at −6 dB, so check what you need for a stereo pair and to connect to your equipment.

IK Multimedia

The iLoud Micro Monitor Pro is a compact option for anyone looking to use built-in ARC X calibration.

  • According to IK Multimedia, the model has a tilting isolation stand, analogue XLR and RCA inputs, and built-in calibration.
  • IK Multimedia lists the measurement microphone with the pair version. The product specifications aren’t independent verification of the calibration results.

Hercules

The DJMonitor 42 is an analogue stereo set designed for DJs, with controls on the right speaker.

  • Hercules lists RCA, a 3.5 mm aux input, a headphone output and two speakers in the box.
  • Hercules’ description of a near-studio experience isn’t independent confirmation that this model is suitable as a reference for critical guitar mixing.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors when editing standing up?

Angle both monitors towards your usual standing listening position and keep the left and right sides of the setup as symmetrical as possible. For stereo, Genelec recommends a 60° angle between the monitors, with the listener at the point of an equilateral triangle. Listening height and reflective surfaces also have an effect.

Do you need an audio interface for each monitor?

Not always: according to their manufacturers, the ADAM Audio D3V and Kali Audio LP-UNF support USB-C audio as well as analogue connections. The Genelec 8010A has an analogue XLR input on each speaker, so check whether your existing equipment has two suitable outputs.

Does room calibration replace careful placement?

No, not on its own. IK Multimedia lists built-in ARC X calibration for the iLoud Micro Monitor Pro, while Genelec emphasises that your room and speaker placement both affect what you hear. Start with a suitable setup and, if you choose to use calibration, treat it as an additional step.

What if a monitor you bought online isn’t suitable or develops a fault later?

For qualifying distance purchases by consumers in the Netherlands, you generally have a 14-day cooling-off period; check the terms of the specific purchase. The Dutch government also states that there is no fixed statutory guarantee period. If a product is faulty, contact the seller.

What rules apply to electrical or Bluetooth monitors in the Netherlands?

According to Business.gov.nl, electrical and electronic equipment sold in the Netherlands must meet the applicable European requirements. Equipment with Bluetooth may also be subject to rules for radio equipment. Where CE marking is required, it is not a quality mark or proof of sound quality.