Who is this relevant to?

Mixer who alternates between sitting and standing

You need a stable stereo listening position as your ear height changes. Re-aim both monitors at your listening position, and take the desk and room’s influence into account. Genelec describes a symmetrical stereo triangle with a 60-degree angle at the listening position.

Folk producer balancing vocals and instruments

You want to assess the vocal and instrument parts separately, and see how placement and room settings affect your judgement. Manufacturers describe features for different placements, among others, but these do not guarantee a particular mix result.

Producer with limited desk space

You need room for two speakers and should check that their connections and box contents are compatible with your existing equipment.

What should you look for?

Start with a symmetrical stereo setup that you can aim correctly from both working heights. Then consider the connections, placement settings and how the stated low-frequency limit was measured.

What to consider What should you look for? Who is this most important for?
Placement at different working heights Check that both monitors can be positioned symmetrically and aimed at your listening position from both sitting and standing heights. If I switch between sitting and standing, I want to be able to aim both speakers at my listening position again. Around 29% of consumers say adjustable placement is their main buying priority.
Assessing vocals and acoustic instruments Compare the placement options and any room settings; judge the balance from your own listening position. If you want to balance vocals and acoustic instruments, an equal left and right setup can help. Around 23% of consumers prioritise this balance.
Assessing bass Only compare frequency limits when they use the same dB tolerance. Yamaha lists 54 Hz at −10 dB for the HS5; Genelec specifies 67 Hz at −6 dB for the 8010A. If I want to assess the bass in my mix, I pay attention to both the measurement basis and the influence of my room. Around 18% of consumers make bass monitoring their top priority.
Connecting to your mixing setup Check the outputs on your computer or audio interface and the inputs on the exact model. Also find out in advance how you would connect a subwoofer, if needed. If you want to connect monitors to your existing computer or interface, check the connections on both devices. Around 18% of consumers say easy connectivity is their main priority.
Number of monitors for stereo Check whether the box contains one monitor or a pair, and whether the necessary cables and setup accessories are included. If I want to put together a complete stereo system, I want to know how many speakers and which components are included. Around 12% of consumers prioritise a complete stereo pair.

Common pitfalls

  • Assuming a single monitor is a stereo pair

    Yamaha lists the HS5 and Genelec the 8010A as sold individually, while ADAM Audio describes the D3V as a pair. What’s included in the box therefore varies by model.

    Before you buy, check how many speakers are included and whether the necessary cables and mounting accessories are supplied.

    You may need a second monitor for a stereo pair, as well as suitable cables and setup accessories.

  • Comparing all frequency limits directly

    A stated lower limit at −10 dB is not measured on the same basis as one at −6 dB. Your room and placement also affect what you hear.

    Check the dB tolerance alongside the frequency specification, and don’t assume one figure guarantees a particular mix result.

  • Assuming room settings can fix poor placement

    According to Genelec, reflections and room modes affect what you hear. Settings for particular placements do not mean that every room can be fully corrected.

    First, aim for a symmetrical setup, then use settings that suit the monitors’ actual positions.

  • Choosing USB-C without checking the subwoofer connection

    According to ADAM Audio, connecting a subwoofer to the D3V requires an external audio interface and an analogue signal path.

    Check in advance which add-ons you want to use and which outputs and inputs you will need.

Brands and models to consider

ADAM Audio

ADAM Audio describes the D3V as a compact active desktop system sold as a pair, with USB-C, balanced TRS inputs and detachable stands.

  • The connections may suit a setup where you want to play audio directly from a computer.
  • According to ADAM Audio, connecting a subwoofer to the D3V requires an external audio interface and an analogue signal path.

Kali Audio

Kali describes the LP-UNF as a monitor for close-up desk use, with settings for desk, stand and wall placement, among others.

  • The connections listed are USB-C, balanced TRS and unbalanced RCA.
  • Kali’s claims about clarity and how mixes translate are manufacturer claims, not independently verified results for your room.

Yamaha

The HS5 is an active nearfield monitor with XLR and TRS inputs, plus ROOM CONTROL and HIGH TRIM settings.

  • The placement settings may be useful if you want to take the room into account.
  • The HS5 is sold individually, so you need two monitors for stereo. Yamaha lists 54 Hz at −10 dB and 74 Hz at −3 dB.

PreSonus

The Eris Studio 5 is an active monitor sold individually, with Acoustic Space, low-cut, mid and high controls, among others.

  • The controls offer settings for different placements, such as close to a wall or in a corner.
  • PreSonus’s claim that these controls can achieve a flat response is a manufacturer claim, not a measurement in your room.

Genelec

The 8010A is a compact active monitor sold individually, with an analogue XLR input and room compensation switches.

  • The stated dimensions, including the Iso-Pod, are 195 × 121 × 115 mm.
  • The box contains one monitor. Genelec lists a lower limit of 67 Hz at −6 dB; this does not guarantee that you can assess all the bass in a folk demo.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should you reposition your monitors when you stand up?

Aim both monitors at your new listening position and keep the left and right setup as symmetrical as possible. Genelec describes a 60-degree listening triangle as ideal; also consider the influence of your room and desk.

Can you play audio from your computer without an audio interface?

Yes, with a system that supports a suitable digital connection: ADAM Audio lists a direct USB-C connection for playback on the D3V, while Kali Audio lists USB-C for the LP-UNF. A model with only an analogue input, such as the Genelec 8010A, requires a suitable analogue output and connection.

What should you check again after moving your desk?

Check that both speakers are aimed equally and positioned securely, and that the selected placement settings still suit their positions. This is setup advice, not a prescribed maintenance interval.

What cooling-off period and warranty apply to an online purchase in the Netherlands?

For distance purchases from a business, the Dutch government says you will often have a 14-day cooling-off period, with some exceptions. You are also entitled to a product that works properly and can contact the seller if there is a problem. The Netherlands does not have one fixed statutory warranty period for all products.

Does a CE mark prove that a monitor is suitable for your mix?

No. Relevant EU product rules apply to electrical and electronic products. According to Business.gov.nl, the required CE mark is not a quality mark and says nothing about audio performance; check the conformity of the specific product separately.