Who are these monitors for?

Composer with a narrow desk

Wants to position a stereo pair symmetrically without taking over the workspace. Size and placement therefore matter when choosing, as the placement guidance from Genelec, ADAM Audio and Yamaha also shows.

Creator working on bass-heavy film scores

Wants to assess low parts, while bearing in mind that a stated frequency limit is not the same as performance at your own listening position. Yamaha and Genelec provide product specifications, and Genelec also highlights the effect of the room.

Mixer in a challenging room

Cannot position the monitors ideally and weighs up placement controls or measurement at the listening position against the extra setup involved. Genelec explains the importance of placement and the room; IK Multimedia lists calibration for the iLoud Micro Monitor Pro.

What to consider when choosing

First make room for a symmetrical stereo pair, then check the connections, bass performance and adjustment options.

Compact active desktop pair

A good choice when: you have a small desk and want to connect to a computer; the ADAM Audio D3V has USB-C and balanced TRS inputs, while the Yamaha HS3 has analogue inputs.

Keep in mind: check that the inputs match your computer or audio interface's outputs. The stated low-frequency limits are not directly comparable unless they use the same measurement limit.

Two very small analogue monitors

A good choice when: space is limited and you have two suitable analogue outputs; each Genelec 8010A monitor has an XLR input.

Keep in mind: Genelec lists one 8010A per package, so you need two monitors for stereo. The stated lower limit of 67 Hz at −6 dB does not, by itself, tell you how the bass will sound on your desk.

Compact pair with measurement-based calibration

A good choice when: you want to measure the sound at your listening position; according to IK Multimedia, the iLoud Micro Monitor Pro has built-in ARC X calibration.

Keep in mind: the measurement microphone is listed with the pair version, so check what's included. Calibration is no substitute for positioning the monitors as symmetrically as possible.

Separate 5-inch nearfield monitors

A good choice when: two larger cabinets will fit symmetrically and you want balanced analogue connections; the JBL 305P MkII has XLR and TRS inputs, plus Boundary EQ.

Keep in mind: measure the available width and depth, and check whether the package contains one monitor or a pair.

Consideration What should you check? Who is this important for?
Space and stereo placement Measure two positions and compare the cabinet dimensions; point both monitors towards your listening position. If I want to position a symmetrical stereo pair on a narrow desk without blocking my workspace, I prioritise dimensions. Around 29% of consumers in this situation put placement at the top of their buying concerns.
Assessing bass in the mix Read the frequency limit alongside the dB measurement limit, and assess the sound at your intended listening position. When working on bass-heavy film scores, I want to check low parts without treating a specification as a prediction of how my room will sound. Around 24% of consumers put bass control first.
Connecting to your existing set-up Note the output on your computer or audio interface and check the input type on the exact model. If I want to keep using my current computer or audio interface, I choose a connection that works with it. Around 18% of consumers give this compatibility the highest priority.
Adjusting the sound at your listening position Check whether the model has manual placement controls or measurement-based calibration, and what's included with the version you've chosen. In a challenging room, I want to assess whether an adjustment suits my listening position without overlooking placement. Room adjustment is the top priority for around 18% of consumers.
What's included in a stereo pair Check whether you get one monitor or a pair, and which cables will work with your connections. If I want to put together a complete stereo set-up, I want to know in advance how many monitors and which connections I'll need. Around 11% of consumers say the contents of a complete pair are their main concern.

Common buying mistakes

  • Assuming the price of one monitor is for a stereo pair

    Genelec lists one 8010A per package, while Yamaha specifies the HS3 as a pair. This means a product package may not contain everything you need for stereo.

    Before buying, check how many monitors are included and which connections and cables you'll need.

    You need two separate monitors for a Genelec 8010A stereo pair; remember to allow for suitable cables too.

  • Comparing stated low-frequency limits directly

    Manufacturers may state frequency limits at different dB measurement limits, and your room also affects the bass you hear.

    Check the measurement limit alongside the frequency range, and assess the bass at your intended listening position.

  • Relying on room adjustment instead of good placement

    Reflections and an uneven left-to-right position affect your listening set-up. Calibration is based on measurements at the listening position, but it cannot remove these placement factors.

    First plan the most symmetrical set-up you can, then use adjustments to suit your specific listening position.

Relevant brands to consider

ADAM Audio

The D3V is an active desktop pair for anyone short on space who wants to use USB-C or balanced TRS.

  • ADAM Audio lists placement switches and detachable stands.
  • The stated low-frequency limit of 45 Hz applies at −6 dB and is not a measurement of performance on your desk.

Yamaha

The HS3 and HS4 are active analogue monitors sold in pairs; the HS3 has the smaller stated cabinet dimensions.

  • Yamaha specifies combo XLR/TRS, RCA and stereo mini inputs, as well as manual room control.
  • Only compare a stated low-frequency limit with specifications that use the same dB measurement limit.

Genelec

The 8010A is a very small active monitor with an analogue XLR input.

  • Genelec lists placement compensation and dimensions of 195 × 121 × 115 mm with Iso-Pod.
  • The package contains one monitor; you need two for stereo.

IK Multimedia

The iLoud Micro Monitor Pro is designed for compact set-ups where measurement and adjustment at the listening position are important.

  • According to IK Multimedia, the model has built-in ARC X calibration and XLR and RCA inputs.
  • The measurement microphone is specifically listed with the pair version; check which version you're choosing.

JBL Professional

The 305P MkII is a separate active 5-inch monitor for a set-up with room for two cabinets.

  • JBL specifies balanced XLR and TRS inputs, plus Boundary EQ.
  • A description of a wide stereo image is a manufacturer claim, not an independent finding for your desk set-up.

Joybuy products

Related products will be available soon.

Frequently asked questions

Where should I put two monitors on a small desk?

Point them towards your listening position and try to keep the distances and heights equal on the left and right. Genelec recommends a 60-degree listening angle for stereo; your desk and room will affect the final set-up.

Can I lay a two-way monitor on its side to save space?

Don't do this without checking the model's design and placement guidance. Genelec recommends placing conventional two-way monitors vertically because the response around the crossover changes when you listen off-axis. It cites a coaxial three-way design as an exception.

Should I choose a USB-C monitor or one for my audio interface?

Choose based on the audio output you actually use. The ADAM Audio D3V offers USB-C audio and balanced TRS; the Genelec 8010A has an analogue XLR input. Check that USB-C supports audio on any model you're considering.

What are my rights when buying a stereo pair online?

For an online distance purchase from a business, you generally have 14 days to change your mind, according to the Dutch government (Rijksoverheid). This is separate from your rights if a product is faulty. The Dutch government also explains that there is no fixed statutory guarantee period for every product in the Netherlands.

What safety checks apply to an active monitor in the Netherlands?

An active monitor containing electrical equipment must comply with the applicable European rules. According to Business.gov.nl, the manufacturer must apply the required CE marking to a compliant device and draw up an EU declaration of conformity; a brand name alone does not confirm this for a specific item.