Who is this choice relevant to?

Editor with one spare mains socket

You want to connect a stereo set without having to reserve a separate socket for each speaker. Look at the power requirements of the complete set, not just the word ‘active’. ADAM Audio and IK Multimedia’s manuals and product information give examples of compact sets with a single power supply for the system.

Editor with an audio interface

You want to keep using your existing outputs and editing workflow, so you’re comparing the inputs and cables needed for compact sets with those of separate nearfield monitors. Check the connections on the model you choose and compare them with the outputs on your interface.

Editor looking for an extra mix reference

You already have an amplified monitor setup or a suitable amplifier, and may be looking for an additional, limited-bandwidth reference. Avantone positions the Mixcube Passive as an additional check; a speaker like this is no substitute for a full low-frequency check.

What should you look for when buying?

Compact active stereo set

A good fit when: having one mains connection for the speakers is a priority and the inputs suit your computer or interface. ADAM Audio says the D3V has a single power supply connected to the left speaker.

Worth noting: check the cable between the speakers and the audio cables needed for your source. The stated low-frequency limit alone doesn’t tell you what you’ll hear at your workstation.

Separate active nearfield monitors

A good fit when: you have room and power for two speakers, as well as a suitable analogue output. Yamaha sells the HS5 individually, with a mains lead for each speaker.

Worth noting: you’ll need two HS5 monitors and two mains connections for stereo. Compare frequency limits only when they use the same measurement tolerance.

Passive reference monitor with amplifier

A good fit when: you already have a suitable amplifier and speaker cables, and want an additional reference. Avantone describes the Mixcube Passive as a limited-range reference.

Worth noting: its stated frequency range of 200 Hz–10 kHz means it isn’t a standalone solution for assessing the full low end. You’ll need extra equipment if you don’t already have an amplifier.

Buying concern What to look for when buying Who is this important to?
Number of mains sockets Check the manual for the number of mains plugs, the power supply and the connection between the speakers. If I have few spare sockets, I want to know how many the complete stereo system needs. Around 36% of consumers give the number of mains sockets top priority.
Connection to your editing source Compare your computer or interface output with the inputs on the exact model, and work out which audio cables you’ll need. If you want to keep using your existing computer or interface setup, compatible connections are a key consideration. Around 29% of consumers prioritise source compatibility.
Placement and listening checks Measure the space available on the left and right, and check the measurement tolerance in dB for frequency figures. If I want to listen to both channels from a fixed position while editing, the pair needs to fit there. Placement and listening checks are the main concern for around 21% of consumers.
Complete stereo set Check whether the offer includes one speaker or a pair, and whether a passive model needs an amplifier. If you don’t want to find yourself missing a speaker or amplifier later, check everything you need for the setup you have in mind. Around 14% of consumers prioritise a complete set.

Common pitfalls

  • Assuming ‘active’ means a set number of mains plugs

    Active means the amplification is built in, but it doesn’t tell you how many mains connections a complete stereo set needs. A set with a shared power supply and two separately powered monitors won’t have the same power setup.

    Use the manual to count the mains connections needed for the whole system, including equipment you already use.

  • Mistaking a single monitor for a stereo pair

    The Yamaha HS5 is packaged individually, while the PreSonus Eris 3.5 2nd Gen mentioned here is sold as a pair. The pack size determines how many speakers you get with an offer.

    Before comparing, check whether the exact version includes one or two speakers and which cables are included.

  • Choosing a passive monitor without factoring in the amplifier

    A passive speaker won’t work without suitable amplification. The Avantone Mixcube Passive is also an additional, limited-bandwidth reference, not a substitute for a full low-frequency check.

    First check whether you already have a suitable amplifier and speaker cables, and whether this limited reference suits the way you plan to use it.

  • Comparing frequency limits without checking how they were measured

    The Yamaha HS5 has different lower limits stated at −10 dB and −3 dB. These figures therefore don’t describe the same measurement conditions.

    Compare frequency limits only when the stated measurement tolerances match, and also assess the recording from your actual listening position.

Brands to compare

ADAM Audio

The D3V is a compact active stereo set that connects via USB-C or compatible analogue outputs.

  • ADAM Audio lists USB-C and two balanced TRS inputs. The manual describes a power supply connected to the left speaker.
  • Check the length of the speaker cable and which mains lead is supplied with the exact version. Manufacturer claims about sound aren’t measurements taken at your workstation.

PreSonus

The Eris 3.5 2nd Gen is a compact pair with analogue inputs for a source with compatible outputs.

  • PreSonus lists balanced TRS, RCA and stereo mini-jack inputs, plus a headphone output on the front.
  • The stated frequency range starts at 80 Hz. Check which power supply and connection cables are supplied with the exact version.

Kali Audio

Kali positions the LP-UNF for listening and mixing close to a desk, with digital and analogue inputs.

  • Kali lists USB-C, balanced TRS and settings for different desk and wall positions.
  • The stated frequency response is 39 Hz at −10 dB and 54 Hz at ±3 dB; this isn’t a measurement taken at your listening position.

Yamaha

The HS5 is an active nearfield monitor sold individually, for a setup with compatible analogue outputs and space for two speakers.

  • Yamaha lists balanced XLR and jack connections, as well as room-control settings.
  • The HS5 is packaged individually with a mains lead. You’ll need two monitors and two mains connections for a stereo pair.

Avantone Pro

The Mixcube Passive can be an additional reference if you already have a suitable amplifier.

  • Avantone specifies a range of 200 Hz–10 kHz, a nominal impedance of 8 ohms and a recommended amplifier power of 10–200 watts.
  • Its positioning as a check for equipment with limited low-frequency response is a manufacturer claim. The passive speaker won’t work without an amplifier and isn’t a substitute for a full low-frequency check.

Joybuy products

Related products coming soon.

Frequently asked questions

Does ‘active’ mean you need two mains sockets for two speakers?

No. ‘Active’ means the amplification is built in; it doesn’t tell you how many mains plugs the complete set needs. ADAM Audio’s D3V manual describes a power supply connected to the left speaker, while the Yamaha HS5 is packaged individually with a mains lead. So check the power requirements of the exact version.

Can you listen directly from your computer without a separate audio interface?

You can if your computer and chosen model are compatible; ADAM Audio lists USB-C audio for the D3V. If you already use an interface, first compare its outputs with the inputs on the monitors you’ve chosen.

How do you connect and maintain the monitors safely?

Follow the manual for the exact model and check that the supplied mains lead and power supply voltage are suitable. ADAM Audio recommends switching off the system before connecting or disconnecting cables, and before cleaning it. The Dutch Fire Service recommends fully unwinding a cable reel before use; this doesn’t mean that every extension lead is prohibited.

Is the statutory warranty in the Netherlands exactly two years?

No. According to the Dutch Government, there is no fixed statutory warranty period in the Netherlands. You’re entitled to a product that meets reasonable expectations; if a product is faulty, the seller is your point of contact. A manufacturer’s warranty is in addition to your statutory rights.

What product regulations apply to electrical monitors in the Netherlands?

Applicable EU product regulations apply to electrical and electronic products. Dutch government information refers, among other things, to rules on low voltage, electromagnetic compatibility and RoHS. The responsible market operator must determine which requirements and CE marking apply to the exact version of each product. A CE marking is not an independent quality mark.