Who are these monitors for?

Creator comparing recordings at a consistent level

For example, you edit speech or music and don’t want to mistake audible differences for differences in a file’s loudness. The European Broadcasting Union describes separate measurements for programme loudness and true peak.

Creator with a small desk

You have limited space and need to check whether two monitors will fit symmetrically on your desk. Genelec recommends a symmetrical stereo setup, while Sound On Sound also points out that the room affects the sound.

Creator with an existing audio source

You want to connect two active monitors to equipment you already own. Product information for models including the Yamaha HS5, JBL 305P MkII and ADAM Audio T5V lists various combinations of XLR, TRS and RCA connections.

What should you look for when choosing?

A monitor helps you listen to recordings, but it doesn’t replace measuring the files: the European Broadcasting Union distinguishes between programme loudness and true peak.

What to consider What should you check? Who is this important for?
Comparing levels A fixed playback setting and a suitable loudness meter for the files. If I compare recordings repeatedly, I want to keep the playback level consistent and measure loudness separately. For around 29% of consumers, reproducible level matching is the top buying priority.
Positioning on your desk Space for two monitors and a position that is as symmetrical as possible on the left and right. If my desk has limited space, I still want to position two monitors so they can be compared fairly. For around 23% of consumers, finding a suitable position in the home office comes first.
Connecting to your equipment The outputs on your audio source, the inputs on both monitors and the cables you need. If I want to use my existing audio source, I want to know in advance which connections and cables will work. For around 18% of consumers, connection compatibility is the top buying priority.
Assessing bass The frequency response and its stated dB measurement basis, plus the position of any bass reflex port. If I want to assess the bass in my recordings, I want to know how the monitor is specified and what I hear at my listening position. For around 18% of consumers, assessing bass comes first.
A complete stereo pair Whether the sales unit includes one monitor or a pair, and what’s in the box. If I want to listen in stereo, I want to make sure I’m getting two monitors of the intended model. For around 12% of consumers, getting a complete pair is the top buying priority.

Common buying mistakes

  • Assuming one monitor is a stereo pair

    Dutch product listings for models including the Yamaha HS5, ADAM Audio T5V and JBL 305P MkII state that they’re sold individually. One unit is not automatically a pair.

    Check the sales unit and order two matching monitors if you need a stereo pair.

  • Comparing frequency limits without checking the measurement basis

    Yamaha lists frequency ranges for the HS5 at both −10 dB and −3 dB; ADAM Audio specifies 45 Hz–25 kHz at −6 dB for the T5V. These figures aren’t directly comparable.

    Check the dB measurement basis for each specification, and assess the bass at your own listening position too.

  • Thinking room controls can make up for poor positioning

    A desk, walls and an asymmetrical setup can all affect what you hear at your listening position. An EQ or room setting won’t automatically eliminate these effects.

    Start by positioning the monitors as symmetrically as possible, then see whether an adjustment helps.

  • Treating a perceived difference in volume as a measurement

    Listening through monitors doesn’t automatically give you measurements of programme loudness or true peak; the European Broadcasting Union describes these as separate measurements.

    Keep the playback setting consistent and also use a suitable loudness meter to measure the files.

Relevant brands

These brands are relevant because of features in the product ranges mentioned; this isn’t a judgement on every product from each brand.

Yamaha

According to Yamaha, the HS5 is an active 5-inch nearfield monitor with XLR and TRS inputs, plus Room Control and High Trim settings.

  • Yamaha lists frequency ranges of 54 Hz–30 kHz at −10 dB and 74 Hz–24 kHz at −3 dB.
  • The lower limit depends on the measurement basis; the settings don’t prove that the monitor will sound neutral in every room. The Dutch product listing states that it’s sold individually.

JBL Professional

According to JBL, the active 305P MkII has XLR and TRS inputs, Boundary EQ and HF Trim.

  • JBL describes Boundary EQ as a setting for changes to the bass that can be caused by the surrounding environment.
  • A setting doesn’t guarantee that an unsuitable room has been acoustically corrected. The Dutch product listing states that one monitor is included per box.

ADAM Audio

The active T5V is a 5-inch nearfield monitor; the Dutch product listing specifies XLR and RCA inputs.

  • ADAM Audio specifies a frequency range of 45 Hz–25 kHz at −6 dB for the T5V.
  • The manufacturer states that it has a rear bass reflex port. Bear this in mind when positioning it: the frequency specification alone can’t predict its performance in your room.

KRK

The ROKIT 5 Generation Five, also known as the RP5 G5, is an active 5-inch monitor with adjustable voicing modes.

  • KRK describes three modes—Mix, Focus and Create—plus 25 combinations of boundary and EQ settings.
  • The modes won’t automatically make files equally loud. Keep the settings the same when comparing recordings.

Genelec

The 8030C is a compact active monitor with adjustable room compensation. The Dutch product listing is specifically for the 8030CP.

  • Genelec states that the 8030C comes with an Iso-Pod and that one monitor is included per box.
  • The 8030C and the Dutch listing for the 8030CP aren’t necessarily the same full product configuration. Check the exact variant and connection before buying.

Joybuy products

Related products coming soon.

Frequently asked questions

Do studio monitors automatically make my recordings equally loud?

No. Listen to recordings with a fixed playback setting and measure the programme loudness of the files separately. The European Broadcasting Union describes loudness and true-peak measurement for normalisation; speakers don’t perform these measurements themselves.

How should I position two monitors on a desk?

Start with a symmetrical setup and point both monitors towards your listening position. For stereo, Genelec recommends a 60° angle between the left and right monitors, with the listener ideally at the point of an equilateral triangle. Then take the effect of your desk and walls into account.

Do I need to order two separate monitors for stereo?

That depends on the sales unit. Dutch product listings for the Yamaha HS5, ADAM Audio T5V and JBL 305P MkII state that they’re sold individually. Check whether the version you want to order includes one monitor or a pair.

How do I compare the stated bass range of monitors?

Only compare frequency limits if the dB measurement basis is also the same. Yamaha gives figures for the HS5 at −10 dB and −3 dB, among others; ADAM Audio specifies the T5V at −6 dB. Also assess the bass where you’ll be listening.

Can I compare monitors at high volume for a long time?

Limit prolonged exposure to loud sound. According to the World Health Organization, the risk to your hearing depends on both the sound level and the listening time; a monitor’s maximum sound pressure level isn’t a recommended working volume.