Who is this choice for?

Student mixing speech

You want to assess the voice, background sound and any stereo placement from a fixed listening position. The position of the two monitors and the room affect what you hear. Genelec offers advice on positioning studio monitors.

Creator with a small desk

You have limited space or want to play audio directly from a computer. Check whether a compact setup will fit and which connection the monitor uses. ADAM Audio lists USB-C and TRS among the connections for the D3V.

Exhibition creator presenting to an audience

You’re mixing the audio, but also need to decide how visitors will hear the story around the exhibition space. In its PA guidance, Yamaha distinguishes between monitors for your listening position and speakers that project sound to an audience.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Speech balance and stereo image Check whether you can position two monitors symmetrically, at the same height, and angle them towards your listening position. Genelec recommends an equilateral triangle, ideally with 60° between the monitors. If I want to assess the voice and stereo balance from one fixed position, the setup needs to suit that listening position; around 33% of consumers say speech balance and stereo image are their top buying priority.
Space and positioning Measure the available space for both cabinets and the cables. Assess the sound where you’ll actually be mixing. If I have a small desk, I want to know whether a symmetrical pair will fit without compromising my listening position; around 27% of consumers put space and positioning first.
Connecting to your equipment Make a note of the outputs on your computer, mixer or audio interface, then compare them with the inputs on the exact model. The ADAM Audio D3V has USB-C and TRS; the T5V has XLR and RCA. If I want to keep using my existing equipment, the connections need to be compatible; around 20% of consumers say compatibility with their current audio source is their top buying priority.
Complete pair and aftercare Check whether the version includes one monitor or a pair, which accessories are included and what warranty terms apply to the purchase. If I want a complete stereo setup straight away and clear purchase terms, I check the quantity and aftercare beforehand; around 20% of consumers give these points their highest priority.

Pitfalls to avoid

  • Assuming a single monitor is a stereo pair

    Yamaha describes the HS5 as one monitor per package; Genelec says the same of the 8010A. If you’re putting together a stereo mixing setup, check how many speakers you’re buying.

    Check the pack quantity for the exact version before putting your setup together.

  • Comparing bass response without checking the measurement point

    ADAM Audio lists the T5V’s low-frequency limit as 45 Hz at −6 dB. Yamaha gives the HS5 as 54 Hz at −10 dB and 74 Hz at −3 dB. These measurement points aren’t directly comparable.

    For each model, note both the frequency and its associated dB measurement point, then assess the sound from your own listening position.

  • Using nearfield monitors as room PA speakers

    A mix that sounds good from one listening position doesn’t tell you how visitors will hear the story from other parts of the room. Yamaha describes PA main speakers as speakers for the audience.

    Treat mixing and playback for visitors as two separate tasks.

Brands to consider

ADAM Audio

The D3V is a compact desktop option with USB-C; the T5V is a separate analogue nearfield monitor.

  • ADAM Audio lists USB-C and TRS for the D3V. For the T5V, the manufacturer gives a frequency response of 45 Hz–25 kHz at −6 dB.
  • Check the connections on your source and whether you need two monitors for stereo. The stated frequency limit doesn’t tell you how speech will sound in your room.

Yamaha

The HS5 is an active nearfield monitor with XLR/TRS connections and controls for adjusting the sound to suit its position.

  • Yamaha lists ROOM CONTROL and HIGH TRIM for the HS5.
  • Yamaha gives the HS5 as 54 Hz at −10 dB and 74 Hz at −3 dB. Don’t compare these measurement points directly with frequency limits stated at a different dB value.

Genelec

The 8010A is a very compact analogue monitor for a listening setup where space is limited.

  • Genelec specifies dimensions of 195 × 121 × 115 mm including the Iso-Pod, and one XLR input.
  • Genelec lists one monitor per package and a low-frequency limit of 67 Hz at −6 dB. Check that the quantity and sound suit your setup and material.

PreSonus

The Eris Studio 5 is an active monitor with controls for adjusting the sound to suit the acoustic environment.

  • PreSonus lists controls including Acoustic Space, Mid, High and Low-Cut.
  • Before buying, check the exact version and assess the settings from your own listening position.

JBL Professional

The 305P MkII is an analogue nearfield monitor with controls for adjusting the sound to suit its position.

  • JBL Professional describes Boundary EQ and HF Trim for this model.
  • The stated settings and listening zone are the manufacturer’s descriptions, not an independent measurement of how the monitor will sound in your room.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can you use the same studio monitors to reach visitors throughout the exhibition?

Don’t assume that you can. Nearfield monitors are designed to help you make mixing decisions from a particular listening position, while PA main speakers project sound to an audience. Yamaha explains this distinction in its PA guidance. Assess playback for visitors separately, taking the specific room and listening positions into account.

How should you position two monitors for a stereo mix?

Position them symmetrically at the same height and angle them towards your listening position. Genelec recommends an equilateral triangle, ideally with a 60° angle between the monitors. Also listen for any effect your desk and walls have on the sound from your position.

Can you connect a monitor directly to your computer?

That depends on the model and the connections available. ADAM Audio lists USB-C playback for the D3V. For an analogue model such as the T5V, check that your computer or audio interface has a compatible output.

How can you check whether you’re buying one monitor or a pair?

Check the pack quantity for the exact version. Yamaha describes the HS5 and Genelec the 8010A as one monitor per package; you need two speakers for a stereo mixing setup.

Which rules should you check for a student exhibition?

A public exhibition may require notification or a permit, or be subject to local council noise rules. According to Ondernemersplein, the rules depend on the type of event and its location. Check the specifics with your local council. The Dutch government states that electrical equipment on the EU market must carry the applicable CE marking; check this for the version actually being offered.