Who are these monitors for?

Producers checking kick and bass

You mix electronic music and want to know how much information your monitors give you about low frequencies from your listening position. Your room and any subwoofer setup are also relevant.

Producers with a small desk

You work close to your screens or a wall and need room for two monitors in a symmetrical setup. Genelec recommends positioning the listener and monitors around the points of an equilateral triangle.

Beginners with an audio interface

You want to connect both monitors to your interface and make sure your order includes a stereo pair. Yamaha lists XLR and TRS inputs for the HS5 and states that this model is packaged individually.

What should you look for?

Compact stereo pair

A good fit if: your desk is small or you listen at close range and can position two monitors symmetrically.

Bear in mind: a compact model won’t automatically let you hear deep sub-bass reliably.

Larger active nearfield pair

A good fit if: you have room for larger cabinets and want to compare the low-frequency response of the main monitors.

Bear in mind: a lower specified frequency limit won’t solve room resonances; assess the bass from your listening position.

Stereo pair with a subwoofer

A good fit if: the lowest bass notes are important to your mix and you can set up the monitors, subwoofer and listening position together.

Bear in mind: placement, level, crossover frequency and phase all need extra attention.

In a home studio, placement and room resonances affect what you hear from your listening position. That’s why Genelec recommends assessing the setup and any subwoofer in the room.

What to consider What should you look for? Who is this important for?
Control over kick, bass and sub-bass Compare the specified lower limit and its measurement tolerance; assess placement and any subwoofer setup in your room. If I want to assess kick and bass from my listening position, I look at the measurement tolerance and the room’s scope for adjustment. Around 36% of consumers prioritise control over low frequencies.
Placement in your home studio Check that two cabinets will fit and plan for equal distances and height around your listening position. When my desk has limited space, I want to be able to position a symmetrical pair without blocking my workspace. Around 29% of consumers prioritise placement.
Connection to your existing equipment Check the outputs on your interface, the inputs on both monitors and which cables you’ll need. If I want to use my existing interface, I check that the stereo outputs and monitor connections are compatible. Around 21% of consumers prioritise connection to existing equipment.
A complete stereo pair Check whether the offer includes one monitor or two, and which accessories are included. If I want to mix in stereo, I want to know in advance whether my order includes two monitors. Around 14% of consumers prioritise clarity about whether a complete pair is included.

Common buying mistakes

  • Comparing low-frequency limits without checking the measurement tolerance

    Yamaha specifies 54 Hz at −10 dB for the HS5; ADAM lists 45 Hz at −6 dB for the T5V. Because the measurement tolerances differ, these figures don’t provide a direct ranking of audible bass performance.

    Note the measurement conditions and assess the final setup from your own listening position.

  • Assuming a larger monitor or subwoofer will automatically solve bass problems

    Room resonances affect low frequencies. Genelec notes that a subwoofer may produce more output next to a wall or in a corner, but that doesn’t necessarily give you the flattest response.

    Start with your listening position and monitor placement. Add a subwoofer only if you can set it up in the room and need the extra low-frequency response.

  • Assuming a monitor package contains a stereo pair

    Yamaha states that the HS5 is packaged individually, but you’ll need two monitors for the intended stereo setup.

    Check how many speakers are included in the offer before you order.

Brands to consider

Yamaha

Yamaha’s active HS range includes the HS5 and the larger HS7. These models offer points of comparison for size and specified low-frequency response.

  • Yamaha lists XLR and TRS inputs and ROOM CONTROL for the HS5. The HS5 is packaged individually.
  • Yamaha specifies a lower limit of 43 Hz at −10 dB for the HS7 and 54 Hz at −10 dB for the HS5. That alone doesn’t tell you which model will sound better from your listening position.

ADAM Audio

ADAM describes the active T5V as a nearfield monitor for small control rooms.

  • ADAM specifies a 5-inch woofer, a rear bass-reflex port and a frequency response of 45 Hz at −6 dB for the T5V.
  • If you place it close to a wall, assess the response in your own room. The specification alone doesn’t prove that the monitor is suitable for mixing sub-bass.

JBL Professional

The active 305P MkII is a model whose connections and adjustment options you can consider for desk or wall placement.

  • JBL lists balanced XLR and TRS inputs, an input sensitivity switch and Boundary EQ.
  • These are JBL product specifications, not independent measurements of how the monitor sounds in your room.

Kali Audio

The LP-6 V2 and LP-8 V2 are part of the second LP generation and give you models to compare for size and specified low-frequency response.

  • Kali lists a specified lower limit of 39 Hz for the LP-6 V2.
  • Kali’s claims about accuracy and how mixes translate to other systems are manufacturer claims, not independently verified results for your home studio.

KRK

The active ROKIT 5 Generation Five is designed for those who want to compare different production modes and mix settings.

  • KRK lists Mix, Focus and Create modes, along with 25 combinations of boundary and EQ settings. According to KRK, Mix Mode is intended for critical listening.
  • These settings are no substitute for checking monitor placement and your room’s response.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I buy a subwoofer straight away for an electronic track?

No. Start with a stereo pair that you can position well, then decide whether you need more control over the lowest notes for your mix. If you add a subwoofer, its placement, level, crossover frequency and phase need to work with your monitors and room.

How should I position two monitors in my home studio?

Genelec recommends a symmetrical stereo setup, with the listener sitting roughly at the point of an equilateral triangle. Aim the monitors towards your listening position and consider reflections from your desk and walls too; EQ won’t automatically fix poor placement.

What should I check before connecting and ordering?

Compare the outputs on your audio interface with the inputs on the exact monitor model, work out which cables you need and check whether the offer includes one monitor or a pair. Yamaha lists XLR and TRS inputs for the HS5 and states that it is packaged individually.

What warranty and cancellation rights apply to an online purchase in the Netherlands?

ACM ConsuWijzer explains that the seller is responsible for providing an appropriate solution if a product develops a fault too soon under normal use. Online purchases often come with a cooling-off period; check the applicable exceptions and returns policy.

Which product safety rules apply to active mains-powered monitors?

Electrical and electronic equipment must meet CE marking requirements where the applicable EU product rules require this. The EU Low Voltage Directive applies to electrical equipment designed for 50–1,000 V AC or 75–1,500 V DC. Check the mains voltage, plug and product information for the exact model; these rules don’t confirm that an individual offer is compliant.