Start with a stereo pair you can position at the same height and distance, aimed at the same listening position. Two screens can affect the space and reflections differently on the left and right. Genelec recommends a symmetrical setup with both monitors facing the same way. After that, compare their connections and sound settings, and assess the bass response in your own room.
Who are these monitors for?
Sound effects editor with two screens
You want to assess movement from left to right and pick out fine details, but your screens may leave limited space for a symmetrical pair. Genelec recommends equal distances and a symmetrical setup to help you assess the listening position accurately.
Editor with limited desk space
You want to check in advance whether both speakers will fit on your desk and can be aimed at the same listening position. The available space and positioning will help determine whether a symmetrical pair is practical.
Creator of bass-heavy effects
You assess effects where low frequencies matter and want to understand how the speakers and room affect what you hear. Genelec discusses bass response in relation to listening distance and the room.
What should you look for when choosing?
First, map out the positions of your screens, speakers and listening position. Then check that the connections and sound suit your equipment and the types of effects you assess. Genelec points out that positioning and reflections can affect the stereo image.
| What to consider |
What should you check? |
Who is this important for? |
| Stereo image with two screens |
Check whether the speakers can be positioned at the same height and distance, aimed at the same listening position and with similar space around them. |
I want to assess left-to-right movement reliably and avoid a strongly asymmetrical setup; around 33% of consumers put stereo positioning first. |
| Detail in sound effects |
Compare the specific features of each model and, if possible, listen from the intended position. A stated frequency range alone won’t tell you how it will sound there. |
I want to hear small changes in effects without mistaking a positioning issue for a product feature; around 27% of consumers prioritise detail in effects. |
| Connecting to your equipment |
Check the audio outputs on your computer or interface, the inputs on the exact model and which cables you’ll need. ADAM Audio lists XLR and RCA inputs for the ADAM T5V; Yamaha lists XLR and TRS for the HS5. |
I want to connect a suitable pair to my existing computer or audio interface; around 20% of consumers put connections first. |
| Low frequencies |
Compare frequency limits only when they’re measured under the same conditions, and take listening distance and room into account. ADAM Audio lists the T10S as a compatible subwoofer for the T5V. |
I assess effects where bass matters and want to know what I can hear from my listening position; around 20% of consumers prioritise bass response. |
Common buying mistakes
-
Ordering one speaker when you expect a stereo pair
The PreSonus and KRK versions reviewed are sold as individual monitors; Yamaha also lists the HS5 individually. So one unit doesn’t automatically mean you’re getting a pair.
Check the exact listing to see how many speakers and which components are included.
You may need to rearrange your desk or use speaker stands to achieve the right positioning.
-
Comparing bass limits without considering the measurement conditions
Yamaha gives different frequency limits for the HS5 at −10 dB and −3 dB. These figures aren’t directly comparable.
Compare specifications on the same basis, and take your sound effects and listening room into account.
If deep bass is essential, assessing your setup or considering an additional system may require extra space and fine-tuning.
Brands to compare
PreSonus
The Eris Studio 5 is an active monitor with settings to account for the effects of the room and positioning.
- According to PreSonus, the Eris Studio 5 has Acoustic Space, mid and high-frequency controls, and a front-facing port.
- The version reviewed is described by the manufacturer as a single monitor. Settings can’t guarantee a symmetrical stereo image if the screens are positioned differently on the left and right.
ADAM Audio
ADAM Audio positions the T5V as a nearfield monitor for small control rooms.
- ADAM Audio lists a 5-inch woofer, XLR and RCA connections, and compatibility with the T10S subwoofer.
- The bass reflex port is at the rear, so consider its position and assess the bass in your own room.
Yamaha
The HS5 is an active nearfield monitor with Room Control and High Trim.
- Yamaha lists XLR and TRS inputs, and gives the HS5 frequency responses of 54 Hz–30 kHz at −10 dB and 74 Hz–24 kHz at −3 dB.
- Don’t compare the two frequency ranges without taking their measurement conditions into account. Yamaha lists the European HS5 individually.
KRK
The ROKIT 5 Generation Five is an active monitor with adjustable listening and room options.
- KRK lists Mix, Focus and Create modes, plus 25 combinations of boundary and EQ settings.
- These factory features don’t prove that reflections from asymmetrically positioned screens will disappear. The listing reviewed is for one monitor.
JBL
The 305P MkII is an active monitor with connections and settings you can compare when planning your setup.
- JBL lists a 5-inch driver, Boundary EQ, HF Trim, and XLR and TRS inputs.
- Check how a pair will fit into your own setup; the features listed alone don’t determine how the stereo image will work with two screens.
Related products
Related products coming soon.
Frequently asked questions
Do the speakers have to sit on either side of exactly one screen?
Not necessarily, but aim both speakers at the same listening position and try to keep them at equal distances and heights. If two screens make a symmetrical setup difficult, adjust the physical layout first rather than relying on an EQ setting.
Can I connect an active studio monitor directly to my computer?
That depends on your computer’s audio output and the inputs on the model you choose. The ADAM Audio manual lists XLR and RCA for the T5V; Yamaha lists XLR and TRS for the HS5. Also check how you’ll control the volume and which cables you’ll need.
What should I check again if I move my workstation?
Check that both speakers are still positioned and aimed evenly. Genelec explains that changes in positioning and reflections can affect the stereo image you hear.
What if a speaker breaks down too soon during normal use?
For a consumer purchase in the Netherlands, the seller must put right, at no cost, a product that doesn’t perform as you could reasonably expect under normal use. ACM ConsuWijzer gives repair or replacement as examples; what you could reasonably expect depends on the product.