Who is this guide for?

Creator with two screens

If you edit or compare recordings, you’ll need space for a stereo pair alongside both screens. Measure the available space and make sure you can position the left and right monitors in a similar way; Genelec highlights the importance of similar reflections for an accurate stereo image.

Editor comparing levels

If you switch between recordings, a consistent listening level will help you compare them more fairly. You’ll also need a separate meter to measure programme loudness and true peak; ITU-R BS.1770 describes how to measure these levels.

Mixer assessing low frequencies

If you also want to assess the bass in your recordings, weigh the stated frequency limits against the space available and the room’s influence. Figures for different monitors are only directly comparable if the measurement conditions are also the same.

What should you look for when buying?

Compact desktop setup

Suitable if: you have limited space beside your screens and want to explore a direct USB-C connection to your computer, as with the ADAM Audio D3V.

Consider: check that both speakers fit symmetrically beside your screens; a model’s stated bass extension doesn’t guarantee a flat bass response at your listening position.

Compact standalone nearfield monitors

Suitable if: you use an audio interface with compatible outputs and want to position small monitors on either side of your screens.

Consider: the Genelec 8010A is 121 mm wide and has one analogue XLR input per monitor; its stated lower limit is 67 Hz at −6 dB.

Larger active nearfield monitors

Suitable if: your desk or separate stands offer enough space and you want to compare models such as the Yamaha HS5, JBL 305P MkII or ADAM Audio T5V.

Consider: cabinet size and the room’s influence still matter; these models don’t all use the same measurement conditions for their stated bass extension.

For a dual-screen workspace, your priorities will largely depend on the space available for positioning, your measurement workflow, how you want to assess bass and the connections on your existing equipment.

Consideration What to look for when buying Who is this most important for?
Positioning beside two screens Measure the available width and depth on both sides; check whether you can aim both monitors at your listening position from a similar height and distance. If my screens leave little desk space, I want to know first whether a stereo pair will fit symmetrically. Around 36% of consumers facing this choice make positioning their top priority.
Consistent assessment of recording levels Keep your listening level consistent and check whether your workflow can measure programme loudness and true peak separately. If I often switch between recordings, I want to compare their levels without constantly changing the volume. Around 29% of consumers prioritise this repeatable listening and measurement workflow.
Assessing low frequencies Compare frequency ranges only when they’re stated at the same dB condition, and assess the bass at your own listening position. When I also need to assess the bass, I weigh this against the space taken up by larger monitors or additional bass monitoring. This is the top priority for around 21% of consumers.
Connections and a complete pair Check the outputs on your computer or audio interface, the monitor connections and how many speakers are included in the offer. If I want to keep using my existing equipment, I need to know whether the connections are compatible and whether I have everything I need for two channels. Around 14% of consumers prioritise compatible connections and a complete set.

Common buying mistakes

  • Mistaking one monitor for a stereo set

    The Genelec 8010A and Yamaha HS5 are sold individually, while the ADAM Audio D3V is described as a desktop set. So don’t assume every offer includes two speakers.

    Before buying, check how many units are included and compare what you’ll need for a complete two-channel setup.

    You may need a second speaker and suitable cables for a complete stereo pair.

  • Comparing bass extension as if the measurement conditions were the same

    Manufacturers state frequency limits at different dB conditions, such as −3 dB and −6 dB. Comparing only the lowest figure won’t give you a fair comparison.

    Check the measurement condition for the stated range and assess the bass in your own room too.

  • Expecting room correction to fix poor positioning

    EQ or room-correction settings won’t eliminate the effects of positioning, symmetry and reflections.

    First work out where your screens, monitors and listening position can go; then compare the adjustment options on different models.

    You may need to rearrange your desk or use suitable stands to position the monitors correctly.

Relevant brands

ADAM Audio

The D3V is a compact desktop set with USB-C and TRS; the T5V is a standalone five-inch nearfield monitor for a different positioning and connection setup.

  • According to ADAM Audio, the D3V has detachable feet and room-acoustic settings.
  • The T5V has a rear bass-reflex port. Consider positioning and pack size with this model.

Genelec

The 8010A is a compact standalone active monitor for a workspace with limited room.

  • Genelec specifies a cabinet width of 121 mm and one analogue XLR input.
  • Its stated lower limit is 67 Hz at −6 dB, so weigh its compact size against your bass reproduction needs.

Yamaha

The HS5 is a standalone active five-inch monitor with balanced XLR and jack inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM as adjustment options.
  • According to the European specifications, the HS5 is 170 mm wide, sold individually and has a stated lower limit of 74 Hz at −3 dB.

JBL

The 305P MkII is a standalone active five-inch monitor with analogue XLR and TRS inputs.

  • JBL lists Boundary EQ, HF Trim and adjustable input sensitivity.
  • A wide sweet spot is a manufacturer claim; it doesn’t prove that asymmetrical positioning beside two screens has no effect.

KRK

The ROKIT 5 Generation Five is a standalone active five-inch monitor with adjustable sound modes and room settings.

  • KRK lists three voicing modes and 25 combinations of boundary and EQ settings.
  • These are features described by the manufacturer, not proof that they can fix poor room acoustics; the product page lists one speaker.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can two screens sit between the speakers?

That depends on your space and the final setup. Aim a symmetrical stereo pair at your listening position and check whether screens or other large objects affect positioning and reflections; the screens alone don’t determine which model is suitable.

Will studio monitors automatically make two recordings sound equally loud?

No. ITU-R BS.1770-5 describes how to measure programme loudness and true peak; keep your listening level consistent too, and use a suitable meter. The EBU recommendation of −23 LUFS applies to broadcasting and isn’t a general Dutch requirement for every recording.

Do I always need an audio interface for a stereo pair?

Not always: ADAM Audio lists a direct USB-C connection to computers for the D3V. Standalone models such as the Genelec 8010A and Yamaha HS5 have analogue inputs; check whether your existing source has two compatible outputs.

Does an offer always include two monitors?

No, check the pack size for each model and offer. Genelec lists one 8010A per pack, and Yamaha sells the HS5 individually; you’ll need two speakers for a stereo pair.

Can I return a pair bought online?

According to the Dutch government, purchases made remotely from a business are often covered by a 14-day cooling-off period. Before buying, check the seller’s information about your order and the applicable returns policy.