Loop editor with a crowded desk
You use two screens and want a clear, symmetrical stereo setup aimed at your listening position. ADAM Audio recommends keeping a clear line of sight between the monitors and your ears.
When making loops at a dual-screen desk, start with a stereo pair that fits physically and gives you a clear line of sight to your listening position; don’t choose based on cabinet width alone. A compact desktop system suits a limited workspace, while separate nearfield monitors offer different connections and placement adjustments, but also need space and careful consideration of cabling and packaging.
You use two screens and want a clear, symmetrical stereo setup aimed at your listening position. ADAM Audio recommends keeping a clear line of sight between the monitors and your ears.
You assess the low end in instrumental loops and want to compare frequency specifications with their stated measurement tolerance and your own setup.
You want to connect the monitors to your existing equipment. Check that your interface outputs are compatible with the inputs on both speakers.
A good fit if: you have little space alongside two screens and work close to the monitors.
Bear in mind: Kali Audio specifies a lower limit of 39 Hz at −10 dB for the LP-UNF; on its own, this figure doesn’t tell you how reliably you can assess the very lowest frequencies in your room.
A good fit if: a narrow cabinet is a priority and your interface has a suitable analogue connection.
Bear in mind: Genelec specifies a width of 121 mm and a lower frequency limit of 67 Hz at −6 dB for the 8010A; check the measurement basis and how many speakers you’ll need.
A good fit if: you have space to the left and right of your screens and your interface is compatible with the inputs on your chosen model.
Bear in mind: JBL and Yamaha list response controls and balanced inputs; these features are no substitute for suitable placement.
ADAM Audio recommends keeping a clear line of sight between the monitors and your ears, and describes an equilateral triangle between the two monitors and your listening position. So, map out the whole setup, including your screens, before comparing dimensions.
| Consideration | What should you check? | Who will this matter most to? |
|---|---|---|
| Positioning alongside two screens | Measure the available space on the left and right, and check whether you can angle the monitors towards your listening position. | I need to fit monitors alongside my screens and keep a clear line of sight to my listening position; around 33% of customers give priority to fitting them on a crowded desk. |
| Assessing kick and bass | Compare frequency specifications only when their stated dB tolerance is included, and consider the effect of placement. | When I assess the low end in loops, I want to know exactly what a frequency limit means; around 27% of customers prioritise checking kick and bass. |
| Connecting to your setup | Compare your computer or interface outputs with the inputs on both monitors, and check which cables you’ll need. | I want to connect my existing equipment directly and use suitable cables; around 20% of customers give connectivity top priority. |
| Complete stereo pair | Check whether the offer includes one monitor or a pair, and work out what else you’ll need for connection and placement. | If I need a left and right speaker, I want to know in advance what the complete setup includes; around 20% of customers prioritise the cost and contents of a stereo pair. |
Manufacturers may specify frequency limits using different dB tolerances, and placement can also affect what you hear.
For each frequency specification, note the measurement tolerance and decide which low-frequency decisions you’ll want to check in other ways.
A cabinet may fit alongside your screens, but if a monitor can’t play freely towards your listening position, it may not suit the setup you have in mind.
Sketch out both screens, the monitors and your listening position before choosing a model.
An offer may include one speaker or a pair; the product name alone doesn’t always tell you how many speakers you’ll receive.
Check the sales unit for the exact offer and work out what you need for the left and right channels.
The LP-UNF is a desktop stereo system worth comparing if space alongside two screens is a key consideration.
The 8010A is a standalone monitor worth comparing if a narrow cabinet is important.
The 305P MkII is a 5-inch nearfield monitor worth comparing if you’re considering connectivity and adjustable response.
The HS5 is a 5-inch nearfield monitor worth comparing if your interface has suitable outputs.
The T5V is a 5-inch nearfield monitor that ADAM Audio positions for small control rooms.
Keep a clear line of sight from both monitors to your ears, angle them towards your listening position and aim to form an equilateral triangle. ADAM Audio recommends this setup; move your screens if necessary or consider suitable stands.
Not without taking the measurement basis into account. Kali Audio specifies 39 Hz at −10 dB for the LP-UNF, Genelec specifies 67 Hz at −6 dB for the 8010A, and Yamaha specifies 74 Hz at −3 dB for the HS5. These aren’t measurements taken at the same tolerance or in your room.
Compare your computer or audio interface outputs with the inputs on both monitors, check which cables you’ll need, and see whether the offer includes one speaker or a pair. That way, you’ll know what you need for the left and right channels before finalising your setup.
Business.gov.nl states that electrical and electronic equipment sold in the Netherlands must meet the applicable European requirements. Consumer purchases are covered by statutory rights to goods that conform to the contract; a commercial guarantee doesn’t replace these legal rights. Check the product information for the specific offer: these general rules don’t confirm that a particular speaker or seller complies with them.