Who is this choice relevant to?

Drum editor with two screens

You want to position a stereo pair so that both speakers have a clear line of sight to your listening position and are equally far away on the left and right. Genelec points out that computer screens can reflect sound.

Mixer assessing kick drums and toms

You want to make decisions about the low end of drum recordings, so you take both the specified frequency response and the effect of the room into account.

Editor with an existing audio interface

You want to connect two active speakers to your existing equipment, so you check that the outputs, inputs and whether they’re sold individually or as a pair suit your setup.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Positioning between two screens Check whether you can position both speakers symmetrically, and keep the direct path for sound clear. Genelec recommends a 60° angle between the monitors, with the listening position at the point of an equilateral triangle. If I work with two screens, I want to position a stereo pair without either screen blocking the path for sound. Around 31% of consumers put symmetrical positioning at the top of their list of buying concerns.
Kick drums and other low frequencies Compare frequency figures using the same dB measurement limit. For example, Yamaha lists the HS5 at 54 Hz at −10 dB and 74 Hz at −3 dB. If I’m assessing kick drums and toms, I want to know what the specified low-end response means for my listening position. Around 31% of consumers give decisions about kick drums and bass their highest priority.
Detail and stereo imaging Check whether both speakers can be positioned at the same distance from your listening position, and whether the screens could cause reflections. If I’m editing drum recordings, I want to assess detail and left-to-right positioning from a consistent listening position. Around 23% of consumers prioritise editing details and stereo imaging.
Connections and a complete stereo pair Check that the inputs match your interface’s outputs and whether the offer includes one speaker or two. If I already have an audio interface, I want to know whether I can connect both channels and whether I’m buying a complete stereo pair. Around 15% of consumers put connectivity and the cost of two speakers at the top of their buying concerns.

Common buying mistakes

  • Leaving a screen between the monitor and your listening position

    A computer screen can reflect sound and take up space you need for a symmetrical setup.

    Before buying, map out the position of both screens, the speakers and your listening position.

    You may need to rearrange your desk or use suitable stands.

  • Assuming the lowest frequency figure means flat bass response

    A frequency limit at −10 dB is not the same as one at −3 dB. Positioning and the room also affect what you hear.

    Compare figures with the same measurement limit and consider whether the setup suits the kick drums and toms you want to mix.

  • Mistaking one active monitor for a stereo pair

    Yamaha lists the HS5 as packaged individually, while PreSonus describes the Eris Studio 5 as a single speaker.

    Check the exact offer to see how many speakers and which cables are included.

    You need two speakers for a stereo pair, and may also need suitable cables.

Relevant brands to compare

Kali Audio

The LP-UNF is designed for a compact desktop setup. The LP-6 V2 is part of a larger nearfield range and is a different model.

  • Kali says the LP-UNF has settings for different desk and wall positions, as well as connections including USB-C and balanced TRS.
  • Kali specifies the LP-UNF at 39 Hz at −10 dB and 54 Hz at ±3 dB. So don’t treat 39 Hz as if it uses the same measurement limit.

PreSonus

The Eris Studio 5 is a single active monitor with controls for adjusting it to your listening space.

  • PreSonus lists a front-firing port and controls including Acoustic Space and Low Cut.
  • The manufacturer describes this model as Single, so check whether your offer includes one monitor or a set.

Yamaha

The HS5 is a single active nearfield monitor with XLR and TRS inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM as adjustment options.
  • The HS5 is packaged individually. Yamaha specifies 74 Hz at −3 dB; bear this measurement limit in mind when assessing the low end of drum recordings.

Genelec

The 8010A is a compact, single active monitor for setups with limited positioning space.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, an Iso-Pod and one analogue XLR input.
  • The specified lower limit is 67 Hz at −6 dB, so its compact size alone won’t tell you how well it handles deep bass.

ADAM Audio

The T5V is another option in the active 5-inch nearfield monitor category.

  • ADAM Audio specifies a rear-firing bass reflex port and a lower limit of 45 Hz at −6 dB.
  • Allow for the space behind this model when positioning it, and follow the manual and the requirements of your setup.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position speakers with two computer screens?

Aim both speakers at your listening position and position them as symmetrically as possible. Keep the direct path for sound clear, and consider whether screens close to the speakers could reflect sound. A compact model may make positioning easier, but it won’t automatically fix a poor setup.

Do I always need a subwoofer for drum recordings?

No, a subwoofer isn’t essential for everyone. First work out which decisions about the low end you need to make and what you can actually hear from your listening position. Positioning and room modes can affect bass, so compare frequency figures alongside their dB measurement limits.

Can I connect studio monitors directly to my audio interface?

It depends on your interface’s outputs and the inputs on the exact model. Yamaha lists XLR and TRS for the HS5; Kali lists balanced TRS and USB-C, among other connections, for the LP-UNF. Also check which cables you need and how to connect both channels.

What does the statutory guarantee mean when buying in the Netherlands?

When you buy as a consumer, you’re entitled to a product that conforms to the contract. If there’s a problem, the seller must provide a solution. Any additional manufacturer’s or seller’s guarantee is separate from this statutory right. For online purchases from a business, you’ll generally have a 14-day cooling-off period; check which terms apply to your purchase.

Which product safety rules apply to electric studio monitors?

Electric and electronic devices placed on the Dutch market must meet the applicable European product safety requirements. According to the Dutch Ondernemersplein, after assessing the applicable requirements, the manufacturer applies a CE marking and draws up an EU declaration of conformity. This alone does not mean that a specific version complies with the requirements.