Who are these monitors for?

Drum editor assessing the low end of the kick

You want to assess the kick and bass in recordings from a fixed listening position. Check the measurement tolerance for stated low-frequency limits, and bear in mind that your room will affect the sound.

Mixer with a small desk

You need to fit two monitors alongside your equipment and assess the snare, cymbals and stereo image from one listening position. Measure the space available for both cabinets and plan a symmetrical setup, as Genelec recommends.

Home editor who listens at low levels

You work in a quiet room or prefer to keep the listening volume down. Assess self-noise and drum detail at your usual listening distance; a low volume setting alone doesn’t prove that the bass response is accurate.

What should you look for?

Start with your room and the connections for a stereo pair. Then compare the low-frequency specifications and check that the monitors will work well at your usual listening level.

What to consider What should you check? Who should pay particular attention?
Assessing the kick’s low end Note both the stated frequency and the dB tolerance. For example, 45 Hz at −6 dB and 74 Hz at −3 dB are not directly comparable. Also assess the bass from your own listening position. If I want to assess the kick and bass first, I need to know exactly what the specification measures and how the monitors sound in my room. Around 28% of consumers give the kick’s low end top priority.
Positioning and stereo image Measure the space available for two cabinets and check whether you can point them towards your listening position at the same height and distance. Settings such as ROOM CONTROL or Boundary EQ can help you make adjustments, but they don’t guarantee suitable positioning. With a small desk, I want to position two monitors as symmetrically as possible so I can work from one fixed spot. Around 22% of consumers prioritise positioning and stereo image.
Drum detail Assess the snare, cymbals and stereo image using familiar reference recordings from your listening position. Treat manufacturer claims about stereo imaging or transients as claims, not as comparative test results. If I want to assess drum attacks and the position of individual elements in the stereo image, I need to listen from my own fixed position. Around 22% of consumers give drum detail top priority.
Listening at low levels Where possible, check the audible self-noise and drum detail at your usual working volume. Don’t draw conclusions about low-level listening from maximum sound pressure levels or an unlisted noise figure. In a quiet home studio, I want to work at a low volume without self-noise interfering with my assessment. Around 17% of consumers make effective low-level listening their top priority.
Complete stereo setup Check whether the offer includes one monitor or a pair, and compare the inputs with the outputs on your audio interface. Yamaha lists the HS5 as one unit per box; the HS5 and JBL 305P MkII have XLR and TRS connections. If I want to connect a complete setup, I need to know how many monitors I’ll receive and which cables will work with my interface. Around 11% of consumers prioritise a suitable, complete stereo setup.

Common buying mistakes

  • Comparing low-frequency limits without checking the dB tolerance

    A frequency figure at −10 dB means something different from one at −3 or −6 dB. What’s more, the specification doesn’t directly predict the response at your listening position.

    For each model, note the frequency and its corresponding dB tolerance, then check how the kick sounds in your own setup.

  • Mistaking one monitor for a stereo pair

    Manufacturers list the Yamaha HS5 and Genelec 8020D, among others, as one monitor per box. You need two speakers for stereo editing.

    Before ordering, check what’s included in the specific offer and how many units you need.

  • Assuming room controls can make up for poor positioning

    The position of your speakers and listening position affects reflections and how you assess the bass. Monitor settings can’t guarantee that an unsuitable listening position will be corrected.

    Plan a symmetrical setup first, then assess whether the selected model’s settings will be useful in your room.

Brands to consider

ADAM Audio

The T5V is a nearfield monitor for a compact workspace where you want to consider the stated bass response and the position of the bass-reflex port.

  • ADAM Audio specifies 45 Hz at −6 dB for the T5V, with a rear-facing bass-reflex port.
  • The specification doesn’t predict how the lowest kick components will sound in your room. Bear the rear port in mind when positioning the monitor.

Yamaha

The HS5 is a five-inch nearfield monitor for a setup with analogue connections and straightforward room controls.

  • Yamaha lists ROOM CONTROL and HIGH TRIM. The HS5 has XLR and TRS connections.
  • Yamaha specifies 74 Hz at −3 dB and 54 Hz at −10 dB; don’t treat these figures as if they use the same measurement tolerance. The HS5 is sold individually.

JBL Professional

The 305P MkII is a five-inch alternative if desk or wall positioning and analogue connections are important to you.

  • JBL lists Boundary EQ, HF Trim and XLR and TRS connections for the 305P MkII.
  • JBL’s claims about stereo imaging and transients are manufacturer claims, not independent comparisons between this monitor and other models.

Genelec

The compact 8020D is worth considering when space is limited and a symmetrical stereo setup is important.

  • Genelec lists dimensions of 148 × 242 × 142 mm, including the Iso-Pod, and a low-frequency limit of 56 Hz at −6 dB.
  • The 8020D is sold individually. Its stated low-frequency limit doesn’t confirm how the deepest kick components will sound at your listening position.

KRK

The ROKIT 5 Generation Five is worth considering if you want to switch between listening modes and EQ settings.

  • KRK lists three listening modes and 25 combinations of boundary and EQ settings for this model.
  • These settings don’t prove that acoustic issues will be resolved in every room. The model is sold individually.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need to buy two separate monitors?

You need two speakers for stereo editing. Yamaha lists the HS5 and Genelec lists the 8020D as one unit per box. Check whether each offer includes one monitor or a pair.

How should you position monitors before assessing drum detail?

Point two speakers towards your listening position, set them at the same height and position them as symmetrically as possible in relation to each other and the room. Genelec describes this as positioning advice, not a guarantee of a particular sound in your room.

Does the stated low-frequency limit tell you how deep your kick will sound?

No, not by itself. Check the dB tolerance alongside the frequency figure and assess the sound from your listening position. For example, Yamaha specifies 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5.

What are your rights when buying online in the Netherlands?

When you buy remotely online from a business, you generally have 14 days to change your mind, although there are exceptions. This doesn’t apply in the same way when buying from a private individual. If a product is faulty, contact the seller about your statutory guarantee. The Dutch government states that there is no fixed statutory guarantee period in the Netherlands.

What should you check for electrical safety and disposal?

Active electrical equipment sold in the Netherlands must meet the applicable European safety and conformity requirements. Business.gov.nl explains that CE marking is not a quality mark. As a private consumer, you can return an old, similar electrical appliance to the retailer when buying a new one under the old-for-new scheme. The Dutch government explains the scheme’s conditions.