Who are these monitors for?

Dialogue editor with a crowded desk

You work with two screens and want to keep a practical, comparable speaker position on the left and right. Genelec recommends a symmetrical setup around your listening position.

Editor checking restoration work

You compare edited speech with the original to assess any remaining noise, clicks or potential editing artefacts. Your listening room also affects what you hear.

Editor with an existing audio setup

You want to connect speakers to your computer or audio interface and check in advance which inputs, cables and components you’ll need for a stereo setup.

What should you look for when choosing?

First, measure the space beside both screens and work out where a stereo pair could go. Then check that the inputs and box contents are suitable for your computer or audio interface.

Buying consideration What should you check? Who should consider this?
Positioning beside two screens Measure the available width and depth on both sides; compare the speakers’ dimensions and possible positions. If I work at a desk with two screens, I want to be able to create a similar listening setup on the left and right. Around 36% of consumers give symmetrical positioning top priority.
Assessing noise and editing artefacts Compare the original and edited audio from the same listening position; don’t treat frequency specifications as a listening test. If I’m checking cleaned-up speech, I want to assess any remaining noise and potential artefacts without assuming that a manufacturer’s claim proves anything. Around 29% of consumers put this first.
Connections and stereo setup Check the outputs on your computer or interface, the cables you need, and whether the box contains one speaker or two. If I want to use my existing audio setup, I want to know whether the connections are compatible and whether I’m buying a complete stereo pair. Around 21% of consumers prioritise these points.
How your desk and room affect the sound Check which desk or wall settings are available on the exact model, and whether optional calibration requires additional measuring equipment. If my desk or room affects the sound at my listening position, I want to know what adjustments are available and what I’ll need to make them. Room calibration is the main buying consideration for around 14% of consumers.

Common buying mistakes

  • Comparing monitors by their lowest stated frequency alone

    A frequency figure depends on the stated measurement limit. For example, Kali Audio lists 39 Hz at −10 dB and 54 Hz within ±3 dB for the LP-UNF. The lowest figure alone doesn’t tell you what you’ll hear in your room.

    Compare frequency specifications only when the measurement conditions match, and assess the setup from your own listening position.

  • Assuming a single monitor is a stereo pair

    Genelec lists one 8010A per box, while Yamaha specifies the HS4 as a pair. These differences in box contents determine whether you’ll have two speakers straight away.

    Check what’s included in the specific offer and which cables you’ll need for a complete stereo connection.

    For a stereo pair, you may need a second speaker and suitable cables.

  • Seeing room correction as a substitute for good positioning

    Reflections and differences between the left and right sides still affect what you hear at your listening position. Having adjustment options won’t automatically make an uneven setup symmetrical.

    First, work out where both speakers can go, then compare the adjustment options. The optional measurement-based calibration for the Neumann KH 80 DSP may require additional measuring equipment.

    Additional measuring equipment may be needed for this optional measurement-based calibration.

Brands to consider

ADAM Audio

ADAM Audio describes the D3V as a compact active desktop system for computer playback or analogue connections.

  • ADAM Audio lists USB-C and two balanced TRS connections.
  • These connections show you the available ways to connect, but don’t prove how well you’ll hear dialogue artefacts.

Kali Audio

Kali Audio describes the LP-UNF as a stereo system for desktop use.

  • The manufacturer lists USB-C, RCA and TRS, along with settings for different positions in relation to a desk and wall.
  • The manufacturer’s claim of clear mix imaging isn’t an independent listening comparison for dialogue.

Yamaha

Yamaha specifies the HS4 as a compact studio monitor supplied as a pair.

  • The UK product specifications list XLR/TRS, RCA and stereo mini connections, as well as room control and high trim controls.
  • The left and right speakers have different connection roles, so check the cable routing for your setup.

Genelec

Genelec describes the 8010A as a compact active monitor sold individually.

  • Genelec lists a width of 121 mm, an XLR input and placement controls.
  • You’ll need two units for a stereo pair, so check how it’s sold.

Neumann

The KH 80 DSP is a compact nearfield monitor with settings for desktop placement.

  • Neumann lists a switch for different desktop positions and optional calibration using the MA 1 measuring microphone.
  • Check what you’ll need for optional calibration and which version is on offer.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

How should I position two studio monitors beside my screens?

Arrange them symmetrically around your listening position, keeping the distance and height as similar as possible on the left and right. Genelec recommends starting with an equilateral triangle and a 60° angle for stereo; adapt the setup to the space you have available.

Can I use the USB-C input on the ADAM Audio D3V to record dialogue?

No. The USB-C input on the ADAM Audio D3V is for audio playback, including from a computer. Don’t assume that it’s a recording input or a replacement for a recording interface.

Will automatic calibration help if the monitors aren’t positioned properly?

No. Start with the intended positioning, then measure at your listening position. Genelec describes calibration as a way to compensate for the effects of the room and recommends measuring at the final listening position.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

Consumer purchases are covered by statutory guarantees, with no fixed guarantee period in the Netherlands; what you can expect from a product depends, among other things, on the product itself and normal use. According to the Dutch government, many distance purchases also come with a 14-day cooling-off period, subject to exceptions.

Is CE marking required for active studio monitors?

The Netherlands Food and Consumer Product Safety Authority requires CE marking for new active electrical studio monitors placed on the Dutch market as consumer products. Check the specific version: a model name or general product specification doesn’t prove that an individual offer meets this requirement.