Who is this monitor setup for?

Editor with one spare socket

You want to review dialogue at a small desk, but can spare only one mains socket for the speakers. Compare complete stereo systems by the number of power supplies they need and the cable connecting the speakers.

Video editor with a wired audio setup

You assess speech alongside video and want to connect your monitors to the available wired outputs on your computer or audio interface. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS inputs.

Editor who also assesses stereo and speaker placement

You have room and connections for a stereo pair, and want to position the speakers carefully in relation to each other and your listening position. Genelec stresses the importance of similar reflections on the left and right for stereo imaging.

What should you look for in studio monitors for checking dialogue?

Compact stereo system with a linked speaker

Choose this when: having just one spare mains socket for the whole system is your top priority.

Bear in mind: the connecting cable partly determines how far apart the speakers can be placed. Check the exact version and what’s included.

Active desktop stereo system

Choose this when: you need a direct USB-C connection or balanced TRS inputs, as with the ADAM Audio D3V.

Bear in mind: check which power supply and cables are included with the version on offer. USB-C alone doesn’t tell you whether a system is suitable for assessing dialogue.

Two separate active nearfield monitors

Choose this when: you have two suitable mains sockets and compatible line outputs, and want to position the monitors separately.

Bear in mind: a stereo pair needs two monitors, two mains sockets and suitable signal cables. The Genelec 8010A is sold individually.

Passive monitors with a separate amplifier

Choose this when: you already have a suitable amplifier or want to build a modular system.

Bear in mind: the amplifier needs power. Also check impedance, power and cabling across the system as a whole.

What to consider What to check before buying Who should consider this?
Power and sockets Count the power supplies and mains leads needed for the complete stereo system, and check whether a connecting cable is included. If I have only one spare socket, I want to know how many connections the whole system needs. Around 36% of consumers say their main priority is a setup that uses as few sockets as possible.
Assessing speech Compare a familiar dialogue recording from your listening position and note the settings of any tone and placement controls. If I’m assessing cleaned-up speech, I want to be able to repeat my settings rather than relying on a pleasing sound alone. Around 29% of consumers prioritise assessing voices.
Wired connections Compare your computer or interface outputs with the inputs on the exact version, and check that the cable or interface you need is compatible. If my editing setup already has a fixed wired audio chain, I want to connect everything without guesswork. Around 21% of consumers say connecting to their existing source is their main priority.
Placement Measure the space on your desk and check that both speakers can be angled towards your listening position, with a similar setup on the left and right. If I assess dialogue from a fixed position at my desk, I want to be able to position both speakers suitably. Around 14% of consumers prioritise a practical listening setup.

Common buying mistakes

  • Assuming two active speakers need only one plug

    A stereo system with two separate active monitors may need a mains lead for each one. A linked pair is built differently, so the number of speakers doesn’t tell you how many mains sockets you’ll need.

    Check how many power supplies and mains leads are included with the complete stereo pair in the exact version you’re considering.

    A setup with two separately powered monitors may need an extra spare socket.

  • Not checking whether a monitor is sold individually or as a pair

    The Genelec 8010A is described as one monitor with one mains lead per pack. So, if you want a stereo pair, check whether you have two units and the right cables.

    Compare the contents of the pack and the connections needed for complete stereo setups.

  • Going by the model name alone with the iLoud Micro Monitor

    IK Multimedia pages using the same product name list different inputs and dimensions. Specifications for different versions aren’t interchangeable without checking first.

    Compare the full model identification, the connections shown in the images and the pack contents with the documentation for the version on offer.

    An incompatible connection could mean you need a different signal cable.

  • Treating placement or tone controls as a fixed listening reference

    Your surroundings and speaker placement affect what you hear. Mackie describes the CR3.5 as having tone controls, so the chosen setting will change the tonal balance.

    Position the left and right speakers as similarly as possible, and note the settings you use when making repeat comparisons.

Relevant brands to consider

PreSonus

The Eris 3.5 2nd Gen is a compact stereo pair with several analogue inputs and a headphone output on the front.

  • The manufacturer lists TRS, RCA and mini-jack inputs, tone controls and a speaker cable.
  • Check the mains connection for the exact version. A brand description isn’t an independent test of dialogue artefacts.

ADAM Audio

The D3V is an active desktop stereo system with USB-C and balanced TRS inputs.

  • The manufacturer lists placement switches and stands. The version described includes a power supply and a cable between the speakers.
  • The stated performance figures come from the manufacturer and aren’t a comparative test for assessing cleaned-up dialogue.

IK Multimedia

The iLoud Micro Monitor is a compact stereo system. Check which version is included in the specific product listing.

  • For the configuration reviewed, IK Multimedia lists one power supply and a four-pin connection between the speakers.
  • Pages using the same product name list different connections and dimensions. Don’t assume the specifications for another version apply.

Mackie

The CR3.5 is a compact pair with one powered speaker and one passive speaker.

  • Mackie lists TRS, RCA and 3.5mm inputs, a headphone output and a switch for desk or bookshelf placement.
  • The tone controls change what you hear, so note your chosen settings if you make repeat comparisons.

Genelec

The 8010A is an active nearfield monitor sold individually, with an XLR input.

  • The manufacturer describes its compact dimensions and placement controls.
  • The pack contains one monitor and one mains lead. A stereo pair needs two mains sockets.

Joybuy products

Related products coming soon.

Frequently asked questions

Don’t passive monitors need a socket?

The passive speakers themselves don’t, but they need a separate amplifier that uses power. So, consider the power connections for the whole setup, not just the speakers.

How should I position a stereo pair for desk-based monitoring?

Angle both speakers towards your listening position and aim for a similar setup on the left and right. Genelec says that reflections and the room also affect what you hear, so take placement into account when setting up your listening space.

What should I do before connecting cables or cleaning monitors?

Follow the instructions for the exact version. ADAM Audio’s D3V manual says to switch off the system before connecting or disconnecting cables or cleaning components. Check the manual for any other model separately.

What are my rights if a pair I bought online doesn’t suit my setup?

For an online consumer purchase, you generally have a 14-day cooling-off period after delivery, subject to exceptions, according to ACM ConsuWijzer. Your statutory guarantee is separate from any manufacturer’s or seller’s guarantee. The seller must resolve issues with a faulty product in line with the applicable terms.

Is CE marking required for electrical studio monitors in the Netherlands?

The Netherlands Food and Consumer Product Safety Authority says CE marking is mandatory for electrical products placed on the Dutch market. Ondernemersplein also outlines the applicable requirements for electrical and electronic equipment. This general rule doesn’t confirm that a specific pair on offer complies.