Who are these studio monitors suitable for?

Dialogue editor who varies their working height

You switch between sitting and standing, and want both speakers to point towards your listening position at the same height. Genelec recommends placing monitors at ear height or slightly above.

Editor comparing different versions

You switch between the original and the cleaned-up recording to assess any remaining noise and newly introduced artefacts. iZotope recommends keeping the original as a reference when checking noise reduction.

Editor with limited desk space

You want to connect two channels without buying more equipment or speakers than you need. So check the available inputs and whether the model is sold as a pair or as a single monitor.

What should you look for?

First, check your listening position at both desk heights. Then make sure the connections and the way the monitors are sold suit your existing equipment and the stereo setup you want.

What to consider What to look for Who is this important for?
Positioning when sitting and standing At both working heights, check that the monitors are level and symmetrically angled towards your listening position. If I alternate between sitting and standing, I want to be able to listen to the speakers from both positions without one being set up differently from the other. Around 33% of consumers prioritise positioning at different working heights.
Comparing the original with the edited version Keep the monitor settings and listening position the same; only compare frequency limits when the measurement conditions are identical. When I compare the original with the cleaned-up dialogue, I don’t want to mistake differences caused by the setup for new artefacts in the recording. Around 27% of consumers prioritise this comparison.
Connecting to a computer or interface Check that the output for each channel is compatible with the USB-C, TRS, RCA or XLR connection on the exact model. If I want to connect my computer or existing audio interface, I need inputs that suit my equipment. Around 20% of consumers make connectivity their main consideration.
Complete stereo pair Check whether the box contains one or two monitors, and which cables and components are included. For stereo playback, I want to know in advance how many speakers I’ll get and what else I’ll need to connect them. Around 20% of consumers focus on getting a complete two-channel set.

Common pitfalls when choosing

  • Mistaking a single monitor for a stereo pair

    Genelec lists one 8010A per box, while ADAM Audio describes the D3V and PreSonus the Eris 3.5 2nd Gen as pairs. You’ll need two separate Genelec monitors for stereo playback.

    Check the specific listing to see how many monitors and which components are included.

    A stereo pair may require a second monitor and suitable cables.

  • Comparing the lowest stated frequency directly

    ADAM Audio specifies 45 Hz at −6 dB for the D3V; Kali Audio gives 39 Hz at −10 dB for the LP-UNF. These limits are based on different measurement conditions.

    Compare frequency limits alongside their dB values, and take the positioning in your workspace into account.

  • Assuming a placement control will suit every desk height

    The direction and height of the speakers still matter when your listening position changes. A setting on the monitor won’t move the speaker itself.

    Check the setup both sitting and standing, and adjust the physical positioning if needed.

    A different setup or suitable risers may take up extra desk space.

Brands to consider

ADAM Audio

ADAM Audio describes the D3V as a compact active desktop pair with USB-C playback and analogue TRS connections.

  • The manufacturer lists feet, mounting points and placement switches.
  • These features alone don’t confirm how well the monitors will reveal editing artefacts on your desk.

Kali Audio

Kali Audio describes the LP-UNF as a model for close-range listening at a desk.

  • The manufacturer lists USB-C, RCA and TRS connections, as well as settings for different desk and wall positions.
  • The stated lower limit of 39 Hz applies at −10 dB; don’t compare it directly with a limit measured at a different dB value.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact analogue set sold as a pair.

  • The manufacturer lists TRS, RCA and front-panel headphone connections, plus high- and low-frequency controls.
  • The stated frequency response starts at 80 Hz. The Eris 3.5 2nd Gen and the 3.5BT are different models.

Genelec

Genelec describes the 8010A as a compact active monitor for limited studio space, with an analogue XLR input.

  • The manufacturer lists an Iso-Pod and placement controls.
  • The box contains one monitor; for stereo, you’ll need two and suitable outputs.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor Pro as a compact monitor with built-in ARC X calibration.

  • For the pair version, the manufacturer lists an included measurement microphone and XLR and RCA audio inputs.
  • A mention of USB-C for digital or control functions doesn’t confirm that USB-C is an audio input on this model. Check the exact version and bundle.

Joybuy products

Related products coming soon.

Frequently asked questions

Should the speakers stay at ear height when I’m standing?

Angle the acoustic axes towards your listening position and keep both speakers at the same height. Genelec recommends ear height as a starting point, so check the setup both sitting and standing.

How can I check that noise reduction hasn’t gone too far?

Keep and listen to the original recording too. iZotope recommends checking for newly introduced artefacts when reducing dialogue noise; keep the monitor setup the same while comparing.

Is USB-C an audio input on every compact monitor?

No. ADAM Audio specifies USB-C playback for the D3V, while Kali Audio lists USB-C as a digital stereo input for the LP-UNF. IK Multimedia lists USB-C for digital or control functions on the iLoud Micro Monitor Pro; don’t assume without checking that it provides the same audio function.

How does the warranty work when buying in the Netherlands?

When you buy as a consumer, a product must meet the expectations you’re entitled to have under normal use. ACM ConsuWijzer explains that the seller must resolve issues with a faulty product under the applicable conditions; don’t assume there’s one fixed statutory warranty period for all monitors.

Which product rules apply to electric studio monitors in the Netherlands?

Various EU product rules may apply to electrical and electronic products. Dutch government guidance includes rules on low voltage, electromagnetic compatibility and RoHS. The manufacturer must determine which rules apply to the specific product and what CE marking is required. CE marking is not an assessment of sound quality.